Counting matching models…
Xbox controller stand with cutouts for the paddles on the back. Best fits the elite series 2, but because of the slightly different shape from the series controller originally used by the OP, it's not a perfect fit. Original elite…
MTG deck box that holds a 100 card commander deck with plenty of room to spare for tokens. Also holds up to 36 12mm D6 dice, to represent tokens, counters, etc. Requires 8 6x2mm magnets Printing: Print the lid top side down. Assembly:…
Deck boxes with capacities for 100 card decks and 60 card decks. both designs have plenty of space for sleeved cards and tokens. Width-wise, there is enough space for an UltraPro divider and enough height for the dividers to poke out as…
Magnetic deck box designed for sleeved 100 card mtg decks. Has plenty for space for tokens. If you have use skinny card divider or no card divider, you can fit 2 toploaders sideways (see third picture). Needed Parts 8x 6x2mm magnets…
Vase mode card sorting tray for standard sized CCG cards. Designed to fit cards Sleeved with Dragon Shield sleeves. Stackable. Printing Instructions Must be printed with 0.6mm extrusion width for the angled parts to print well.
Adds a small section of 5mm thick IKEA Skadis pegboard to a standard 1 inch pegboard grid. Use the loose model if your printer prints inner dimensions undersized, the holes are .2 mm wider. Example in image is Digital Caliper mount for…
Holds CHP flush cutters on a standard 1 inch pegboard. Printing Instructions Print in downloaded orientation. Supports are required for the pegboard posts.
Holds CHP wire strippers on a standard 1 inch pegboard grid. Printing Instructions Print in downloaded orientation. Use supports from bed to support pegs.
LTT Screwdriver holder for 1 inch pegboards. Printing Instructions Print in downloaded orientation. Supports will be necessary.
Covers your keys to protect them from being copied from a photo. Inspired by so many pictures in the keychain tools contest having key bittings clearly visible. Works on both keys I have, may not on yours. For more info, here's a video of…
3/8 x 2.5 inch Collar Stay I designed when all of mine gradually disappeared. Since it's 3D printed, remember to remove these before washing.
Protects joycons, particularly the joysticks. This variant locks together to keep joycon pairs together in a bag. Video of the locking function: You can also slide them apart, but the layer lines make an unpleasant noise. I have added…
Card divider for standard size (~66x93mm sleeve) ccg cards. Prints in downloaded orientation and uses a small amount of filament.
Pegboard holder for the iFixit Mako screwdriver kit. Holds the kit and other small items like tweezers in the side compartments. Printing Instructions: Print in the shown orientation: Assembly: To assemble, you will need: 1 main body 2…
Box to hold a Magic The Gathering limited kit, complete with dedicated slots for lands. Side compartments are long enough to hold toploaders sideways. Lid can be placed underneath to save table space. Narrow enough to fit in a shoebox…
Combined storage for 48 12mm d6 dice and about 8 24mm dice. Fits neatly in a shoebox column. Printing Instructions Print in downloaded orientation
A clip for a model of the plastic Husky ¼ inch socket rail, with a trapezoidal profile. Rather than buying another socket rail for just two more clips, I decided to design these instead. There's another model with a curved top on the Home…
Dice containers designed to fit in a standard collectible card box column, 78.5mm wide by 107.75 mm tall. Designed to fit well alongside my cardbox deck boxes . Each lid has some extended bits to stop dice from rattling around inside.…
A box to hold Tony's Filament Swatches . Holds 20 swatches, prints in vase mode. Printing Instructions Print using vase mode in the downloaded orientation. Use 0.7mm extrusion width on both parts for a good fit. On prusaslicer, extrusion…
Fast printing first layer clearance test for 0.5mm, 0.4mm, 0.3mm, 0.2mm and 0.15mm clearances. Slot lengths indicate which circle has which clearance, longest is 0.5mm and shortest is 0.15mm. The center hub should peel away without…
This is a modified version of swissmineral's grabber , made to be held more like a pen than pliers. I recommend using PETG as swissmineral suggested for the original model, as the PLA I used makes the mechanism a bit stiff.
Dice Tube printed in vase mode. Can carry up to 10 24mm or 26mm dice. with 0.4 mm extrusion width, printing this only requires about 3.5m of filament and for 0.6 mm, just under 5 is required. PLA works fine for me but I would recommend a…
Designed to fit (loosely) in the bottom of a 5 gallon bucket, to allow an air gap between desiccant pellets or packets and filament stored in a sealed bucket. Print 3 arms and one core. Category: Tool Holders & Boxes
Holds an LTT Screwdriver and shaft extension, and fits on a 1 inch pegboard spacing. Printing Instructions Print in downloaded orientation, with supports for the pegs. Tree supports recommended. Works best with 0.4mm nozzle.
This is a version of my vase mode bearing container, with a screw cap instead of a press fit cap, it should hold bearings more securely. As with the standard container, you may need to change your extrusion width so the bearings and lid…
Allows a Sennheiser E935 microphone to be placed in a 45mm diameter shock mount. Designed to hold the microphone around its center of mass, to reduce strain on the shock mount. I have included a rough STEP model of the microphone for…
0.6mm thick oil counters for Magic The Gathering. 12 and 18mm squares can be put in square dice holders like my dice boxes . Printing Instructions Print in downloaded orientation, 0.2 mm layer height.
Modified MajorHardware's NH-AAS with a mount for the Modular Mounting System/GoPro. Fits well with NA-SAV4 anti-vibration mounts. I recommend using the gasket that comes with your NF-A12x25 to get a better air seal around the NH-AAS. Also…
pen clip for the pull out desk extension on my vintage steelcase desk. Printing Instructions print in downloaded orientation, Arachne perimeter generation is strongly recommended.
Toothbrush holder for wide mouth mason jars. Holds two toothbrushes with a large hole for holding other things. There are two variants, the regular lid and one with a wider half to hold some toothpaste tubes. Printing Instructions Print…
This is an inline mount for the Noctua NA-FC1 Fan controller for HeyVye's Modular Mounting System . Fan port goes on the side labelled with a fan picture, Power comes in from the side labelled with a power plug. the FC1 could be attached…
These are all currently available results.
