Counting matching models…
Instructions My son and a friend asked me to make some Finger-snowboards. Kids love them and it's my fav 3DP giveaway these days! I usually print them in PLA and then put the tip's in boiling water to bend them up a little. Stickers are…
Print with 3-4 shells and no supports for the best optical effect. Also works as a good test of printing 60 degree sloped objects - theoretically impossible, but fully doable as long as you slice it so that loops (wall's that are inside…
Instructions This model can lift quite easily at the ends, so a little ABS/PLA sludge will help stick these down. Alternatively, just print using a raft. Examples printed with Faberdashery's Galaxy Blue and DiamondAge Ruby PLA.…
Making a Troll and needed a pair of boots for him. Made in Rhino from scratch.
Pointed at 10 degree angle, to look down at stuff
The spool holders that come with the Flashforge Creator 5 are ony 66mm long, so they cannot fit normal 1kg spools from vendors such as Prusa and others. This model is a design compatible with the original mount an it's designed to be a…
Print with 3-4 shells and without infill / supports for the best optic effect. Examples were printed in beautiful transparent PLA from diamondage.co.nz Category: Coins & Badges
Insert the 6mm laser diode in the center hole, lock it with a 3mm screw. Screw the flexture in place at the desired position, fine-tune the positioning using 3mm screws from each side. Print in a flexible plastic like PETG for the most…
Update: "flute08.stl" is the version I use the most these days. It has a tiny square break-away part that supports the overhang of the corner. Makes for prettier prints and less cleanup. Instructions Turns out that making a flute is a lot…
Instructions I'll add some more versions (and better images) of this later as I fill up my cases and see what my need will be, but you can always grab the Rhino .3dm file and modify it yourself :) Update: turns out 3 compartments only…
Read more about the process here http://flashgamer.com/arduino/comments/making-a-good-cube Instructions This thing will print nicely on Makerbot's (only I've tested). The cube is really thin, just 1.25 mm but the lid stiffens the…
Mashup of the hand by Daniel K. Schneider http://www.thingiverse.com/thing:2608 I printed mine in Nylon (Taulman 618) to test this material, but it would print fine in any high strength material like PET-G.
Keep in mind that PLA melts at 60 degrees. I had to use ABS or it would melt when used in the heated PCB tank ( like this one http://www.instructables.com/id/Vertical-Etching-Tank-for-DIY-PCB-etching/ ) Category: Electronics
Simple but working enclosure to use the Higrow boards outdoors. These sub $10 pcb's are great for hobbyists looking to do automated watering of plants with realtime reporting of temperature and moisture in both soil and air. The onboard…
The holder has two holes for mounting on a wall, but it can of course be fastened with double sided tape as well. I've added a file that has all the parts as well as a tube that is there just to increase the layer print time so that the…
Customized version of http://www.thingiverse.com/thing:386904
Made to print on a Prusa Mk2/Mk3, this replacement is 2cm shorter than the original. Just place the part and rotate 40 degrees to make it fit the build platform
Junior loves playing Canabalt with his MakeyMakey, but said it was uncomfortable to hold. This controller was drawn by him and modeled by in Rhino Just print and stick the MakeyMakey ( http://www.makeymakey.com ) into this. I've included…
For those times when you cannot wait a week for the real deal/parts. Keep in mind that plastic will compress over time as opposed to the original metal part.
Slice without top/bottom and with no fill. Set shell thickness to twice of your nozzle size, so for 0.4mm Nozzle, use 0.8mm thickness. As seen in the pictures - it's stretchy enough to use as an emergency hairband as well without loosing…
The arm and hook are like on the original, but the Hub has been redone to work with both 3 and 6 adjustable arms as well as to fit the Ultimaker mount. Instructions Just print a hub and the amount of arms you need to get a super-sturdy…
My three year old PreSonus Eris 3.5BT speakers died, so I made and printed a replacement. Story found here https://flashgamer.com/blog/comments/we-wont-repair-that-just-throw-it-in-the-trash Print in your desired material & color. The…
Enclosure for the MegaMatrix (detalis here https://flashgamer.com/blog/comments/megamatrix-1.0) that makes it look like a proper supersized 8x8 led matrix - just a lot bigger. I made this for my students to understand how a LED matrix and…
For my microcontroller class we could only afford 4 robot kits for the 30 students... To remedy this, I came up with this simple robot based on two steppers and a servo that can draw pretty much anything given the right code. The robot…
My brother is in the digital signage business. It's easy to just be "one of many" selling such solutions, so as a birthday present I made him something special. Something that people he met would easily remember him and what he did. This…
Simple grid system for organizing tools on a padded/soft cubicle wall. Has holders for cables, screwdrivers, calipers, pens. Ping me with suggestions for more useful things. Everything just clicks in place into the grid, so it's a quite…
Thanks to @Stelzenbach for making such a nice model that I could remix to keep my cubicle tidy!
When I go wild ice skating on lakes and fjords, there's always a bit of safety gear you carry along. To also carry two separate skates is just annoying, so I made this 3D printable holder. Carry by the handle and just drop the skates in…
These are all currently available results.
