Counting matching models…
Updated 16 Nov 2024 - inlude chamfer option Updated 27 Nov 2024 - Smooth Sides option I was looking for a parametric round container with a screw lid. Couldn't find anything on Printables but found an excellent design over at Thingiverse.…
Updated 17 July 2024 - Support for Multi Colour printing I was inspired by the concept of BuildBug's socket holders created in Fusion 360 https://www.thingiverse.com/thing:4696546 . But after a day messing around with Fusion 360 ( I'm not…
I love the box by MrElektro @MrElektro_32607 . I wanted to create different size boxes and also wanted a stackable version. I've not had much luck editing and scaling .step files . I'm also concerned that things like wall thickness won't…
The model uses OpenSCAD to create a custom name plate with your own text. Many of the Oscar models require you to make a name plate in another CAD program and/or print it flat and bend it around the base when the print is still warm. This…
A simple holder to mount a Flysky FS-iA6B Receiver Uses M3 screws
This is a case and insert for the Flysky FS-i6 or FS-i6x. Sized to print on a MK3 or MK4. I glued some foam to the lid of the case and created an insert for the base of the case. The Case The case is a version of…
Holder for ther FlySky 10 Channel Receiver Its created with OpenSCAD so you can change it . Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open the .scad file make any changes you need Use F5 to preview the model or…
Suggest printing with 100% infill. The bookmarks are 2mm thick you can cut them in the slicer to create thinner e.g. 1mm versions.
A simple camera mount for the logitech C920 for the Orginal Prusa Enclosure. Mount on the internal enclosure upright using M3 x 8mm screw. Printed in PLA with 20% infill. V1.1 incresed the size of the standoff…
Printed laying down with organic supports. I tried printing upright but it failed There's a bit of work removing the supports. Scale to your needs
Description I needed a lipo carrier for my Ardupilot Rover, so I designed a parametric version. I'm using a Turnigy 4000Mah 3S battery. Which is 145 x 50 x 24mm. Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open…
This bracket allows you to mount a ER6 or ER8 in places where double sided tape may not be reliable. An STL file is included If you want to tweak it using OpenSCAD: Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open…
Tesing the vent operation is difficult because the firmware remembers where it thinks the vent is and so it doesn't change the vent position unless you load a filament like ASA or ABS. And then it takes ages for the printer do all its…
I found other shunt holders but they didn't fit the shunt I had. They were out by about 5mm. This fits a shunt with 85mm between the main bolt holes. But its created with OpenSCAD so you can change it . Using OpenSCAD download OpenSCAD…
Description I needed a rectangluar template to accurately cut a holes into a panel It includes notches so you can line up the template with measurement line. Includes text of the cutout size inase you make a few different ontes and need…
A remix that has a gap for the wires so it can be panel mounted
To change dimensions in Fusion 360 from the Modify Menu choose Change Parameters. On a Prusa MK4 print Vertical The design has screw holes so you can bolt mutliple shelves together
Bracket to mount the CUAV C-RTK 2HP Hellical GPS Antenna . The antenna press fits, use M5 Screws to mount the bracket. The Antenna is raised to allow a radius bend with the SMA cable Print in PETG.
I keep loosing the end clip so I made one that can be cable tied into place. Printed in PETG and been using it for 6 months with no problems. Includes Fusion 360 Model
I wanted something more attractive that the green bowl the shaving soap comes in. I printed it in Marble PETG . I use a knife to slide down the side of the soap in the green bowl to losen it and transfer to the 3D printed bowl.
Description I needed a template for a double flat round switch so I could accurately cut a hole .. The Template includes alignment notches. Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open the .scad file make any…
Signs for Fuel cans or your vehcile My adhesive signs keep peeling off so I glued these signs to my fuel can using silcon adhesive. Sizes 130mm and 60/65mm
A simple sign for Gluthen Free . Prints in PLA with no supports
I live on top a windy hill and even with the BBQ strapped to the wall it moves around. These wheel chocks keep it place. Onshape Link
I have some paper towel rolls on a metal workshop shelf which always seem to be falling over so created this model with optional magnets. Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open the .scad file make any…
Beause everyone needs a hobby to make something that glows I told my friends I was getting into recreational plutonium . They said, “That sounds dangerous!” I said, “Relax — it’s all about half-life balance .”
A simple bracket to hold the C-RTK 2HP in place. I didn't want to risk it coming loose inside my rover , this bracket adds some support. It holds the C-RTK 2HP firmly , I would also add some double sided tape. Mount the bracket with M4…
These bins are used in Wesco Pull Boy bins. I needed lids in different colours so I created a design in Fusion 360. There are two versions of the 8L bin so make sure yours is the M8366108-2
The purpose of this model is to provide a drill template to mount a ATV rim to a Quantum Edge 2.0/3.0 Motor The Wheel Chair Motor The Quantuam Edge motors come fitted with a 5 stud hub which is great for mounting a wheel. The ATV Rim The…
Stand for Chanel 5 bottle which doesn't sit well due to its curved shape
Uses 2 or 4 - 6mm x 1.5mm Magnetics. Push the magnetics into place with pliers no need for glue. The holes can take upto 1 or 2 magnetics. Print without supports. Fusion 360 file included so you can change for your needs.
If the Sun is stopping your IR Beams from working this might help Tinkercad model https://www.tinkercad.com/things/aaDceWmcOyn
This is a simple slip fit shield that fits on the side of the heatsink on the Sabertooth 2X60 to prevent electrical short when inserting battery wires and motor wires to the lugs/terminals. The way the lugs are designed, the wire could go…
Holder if y9ou want to store the Braun FaceSpa Pro standing up.
Simple mount for the JRK G2 18v19 and 24v13 USB Motor Controller with Feedback. Use M2 screws to attach the board to the mount Use M4 Countersunk Screwes to attach the mount
Sabertooth 2x60a Motor controller without heatsink fan
Signs to attach to drink stand or attach to a cooler
These are all currently available results.
