Counting matching models…
Like there isn´t enough headphone holders. I wanted to makea design what fits in envelope and also Prusas plate. Assembled without screws, tools or glue, no supports needed naturally. Measurements: Height: 190mm Width: 130mm Length: 130mm…
Case for Arduino UNO and CNC shield V3, case has place for 50mm fan. Fastening holes are for V-slot rail (20mm), holes are for M5 screws. Other end has openings for Arduino UNO´s sockets and other end 10mm hole for power plug and slot for…
Originally, I developed it for my own use, because as a quadriplegic, opening drink cans is at the very least a challenge. Opener can also be used to close the can from insects, just twist it clockwise. Measurements: Length: 70mm Width:…
I designed this for my own use, I'm an C5 quadriplegic, so my hands and fingers are quite shittyshittybangbang, can't get grip of anythin heavy or slippery. This can be used to lift it with your thumb. Handle is slided down to it´s place.…
Fusion 360 lesson, one printed phone stand (ctrl design), and mainly because I´m an wheelchair user, it was clear what I wanted to do. This is a first model I have made and when it´s printed, it need adjustments, that´s why it´s v1. But…
Holder/bracket for Nema 17 stepper motor. Fastening holes are spaced for 40mm wide V-slot rail (20mm), holes arre for M4 screws. Measurements: Height: 48mm Width: 47mm Length: 82mm Max stepper length: 56mm (motor can be longer if…
LedStrip Light Bar for Creality Ender 3. Width is calculated so spool holder has room on the frame. Tested on CR-10S also and light amount is quite okay (LED Strip 4,8W/m). Frame has two thicness versions, 10mm and 12mm. There isn´t big…
Case for LM317 voltage regulator with strain reliefs. Size: H40xW22xL68mm Fastening holes: 2x4,2mm Strain relief holes: 4x2,8mm (use M3x5mm screws) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
These hinges are made for acrylic door. I designed parts for IKEA Lack enclosure and it needed hinges, where doors are 13mm depth from feet surface. Measurements: Height: 50mm Width: 60mm Holes: 4,5mm Countersink: 8mm Female part depth…
Measurements: Height instep: 100mm Width leg: 97mm Adjustment: 247-280mm (EU38-43 | US 5-8,5) Fastening screw M3x14mm. Nuts (M3) are inserted in the knobs mid print. Rafts: No Supports: No Resolution: 0.20mm Infill: 15% Perimeters: 4…
With Creality CR-10S Pro came 0,2mm feeler gauge, but I lost my nerves using it with my shittyshittybangbang fingers, so I designet handle for it. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
I´m a big fan of Raspberry PI model 3 case for 40mm double V-slot rail with 40mm fan. I couldn´t attach it to my CR-10S Pro´s frame, so I made this design what I install on my printer cabinets wall. Rail: 40x10x92/152/202mm Rail holes:…
Idea of this is hold 10m+ hose and two pneumatic tools, what are hanging on those 30mm long slots from connector. Space for hose is way too big (can fit 20m 3/8), but I hate if holder is too small and hose won't stay well. Black part is…
Case for LM2596 voltage regulator with strain reliefs. Size: H20xW41xL91mm Fastening holes: 2x4,2mm Strain relief holes: 4x2,8mm (use M3x5mm screws) Lid fastening holes: 2x2,8mm (use M3x5mm screws) Print Settings Printer Brand: Creality…
Spare hinge for Biolan Speed Kompostor 220, not sure can it be fitted on other models. Measurements Height: 19mm Length: 91mm Width: 32mm Hole diameter for peg: 8mm Fastening holes/slots: 2x6mm Print Material: TPU Supports: No Perimeters:…
Enclosure for limit switch module (aprox. 16x40mm). Circuit is placed with three pegs and M3 screw what fastens lid. Measurements: Height: 15mm Width: 20mm Depth: 67mm Lid fastening screw M3x14mm. Lid fastening hole: 3,2mm Fastening…
Holder for Raspberry pi camera. Fastening holes are spaced for 40mm wide V-slot rail (20mm), holes are for M5 screws, arm is fastened under screen holder. Camera cable has room between two side planes behind the arm. Camera case is…
This rear indicator base is mounted on license plate holes (8,20mm), holes are 105mm apart. Flasher holes: Screw: 6,20mm Wire: 8,00mm Apart: 17,00mm Edit: 26.9.2018 Second versions has slots for wires, so there is no need to undo…
Why not use fridge door for some Tic-Tac-Toe gaming. Magnets: 3*6mm round (12pcs) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 15% Filament: 3DJake PLA Notes: Pause the print and…
I designed this for my own use, I'm an C5 quadriplegic, so my hands and fingers are quite shittyshittybangbang, can't get grip of anythin heavy or slippery. This can be used to lift lid with your thumb. When printed with PLA, or PETG, you…
These are all currently available results.
