Counting matching models…
Simple photo frames for standard 9x13 or 10x15cm photos. Each picture frame is made up of three simple parts that fit together without glue. You will also need 1mm acrylic glass (150x100x1mm or 130x90x1mm) for the front of the photo.…
Another simple AirTag Holder for a bike saddle. You need 2 M4x8 + 2 M4 nuts to fix it. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 50% Filament: Smartfil ASA…
This is a remix of the lovely build by alpo16000 . Everything except the TPU ring is printed with PETG, 0.2mm layer height and 20% infill. "McFly_House" requires support for the front sight opening and rod. "McFly_Banner" and "McFly_M"…
A simple spice rack for the SKADIS pegboard, 56x56 cm. 2x6 spice containers with standard dimensions (max. ø ~43mm) fit into a continuous row of 2 components. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament:…
Only a simple holder for the mobs to dry. I've screwed it under the cupboard in the utility room with just 2 screws (3,9 x 13mm) and it can hold up to 5 mobs. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't…
Simple stand for our grill pan to save space in the cupboard. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 25 Filament: GEEETECH PLA silver Category: Kitchen & Dining
A simple, functional inlay for Wingspan with European Expansion. Theoretically, there is still room for another expansion... You need two "cover" and all other parts once. The "cross" is a filler and takes the overview part and the…
A simple stand for my eufycam 2 Pro with the magnetic indoor mount. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.30mm Infill: 30% Filament: DAS FILAMENT PETG translucent…
This is a remix of the lovely boxes from Lubi90 . The token holders are still from here and only the updated one should be different. The original boxes have to be scaled and the updated holder with the bigger dice compartment doesn't fit…
This is a simple filament guide on my ikea Ivar shelf. I inserted a few centimeters of PTFE tubing (no glue required) as a guide and used a 3.9x13mm screw to screw it on. Print Settings Printer Brand: Anycubic Printer: All-metal Mega…
A simple way to hang a kitchen roll under the spice board of our Hymermobil. Four M4 x 10mm are required for installation. V2: a little bit fine tuning... Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports:…
A simple mobiles design for xmas. I've used a 6mm macrame cord with knots. Print Settings Rafts: No Supports: No Resolution: 0.30 Infill: 25% Filament: extrudr PETG Glow in the Dark Category: Sculptures
A simple remix, because the plug of my homepod was a little too big for the original adapter to use it with the lovely "Wall Mount Plug" . Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: No Resolution: 0.20…
A simple inlay to organize the (german) game content. For all you need: 2 x "QvQD_Großer_Deckel", 2 x "QvQD_Große_Box", 2 x "QvQD_Kleiner_Deckel", 2 x "QvQD_Kleine_Box", 1 x "QvQD_Gold_Deckel", 1 x "QvQD_Gold_Box", 1 x "QvQD_Rest_Deckel",…
A little support for our small tomatoes. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG white Notes: I used brim... Category: Outdoor & Garden
Remixed to fit in my IKEA Ivar. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: GEEETECH PLA silver Category: Tool Holders & Boxes
I was annoyed that our barbecue (Broil King - Porta Chef 320) always stood at an angle because the terrace was not level and the sausages would roll off the barbecue. So I made four height-adjustable feet (max. ~2.5 cm) that can be used…
In the past, I put broken pieces in the bottom of the plant pots to avoid waterlogging. Today, i use my drainage caps. This one is for 30mm holes and a little bit immovable... Print Settings Printer Brand: Anycubic Printer: All-metal Mega…
The german version of Obsession (basic without expansions) has some smaller cards, so i created a simple inlay for one of the big boxes inside. For the family boxes i used this one from jscherpelz . Category: Games
These are all currently available results.
