P
PrintablesRittai 3D Design
Pi Camera Lens Focus Adjustment Tool
Focus adjustment tool for Raspberry Pi Camera V2 Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 50% Category: 3D Printing
- Downloads
- 751
- Likes
- 33
- Rating
- 4.8
All models
Counting matching models…
P
PrintablesRittai 3D Design
PVC Pipe T-Joint/L-Joint Adaptor
PVC Adaptor for 15mm Nominal Diameter PVC (Actual inner diameter is 18mm and outer diameter is 21.6mm) Update: T-Joint REV1 (31/5/'17): Apologies: I had the model oriented incorrectly. L-Joint Added (3/6/'17) Corner-Joint Added (9/8/'17)…
- Downloads
- 435
- Likes
- 78
- Rating
- 0
P
PrintablesRittai 3D Design
Thank You Plaque/Sign
A simple gift idea to say thank you. Category: 3D Printing
- Downloads
- 400
- Likes
- 31
- Rating
- 5
P
PrintablesRittai 3D Design
Rotary Counter Dial / Knob
Initially designed for counting number of cups of water consumed, it can be adapted to count various things for games or in general. It features 11 positions which 'click' in place with a simple compliance mechanism. This is a two body…
- Downloads
- 383
- Likes
- 46
- Rating
- 4.71
P
PrintablesRittai 3D Design
Geodesic Dome 3V Model
A fully printed 3V Geodesic Dome approximately 40cm diameter. Colour coded for ease of assembly. Please note the orientation of Joiner B (Colour: Blue) which has an arrow geometry designed in the joiner/connector. The installation of the…
- Downloads
- 334
- Likes
- 43
- Rating
- 0
P
PrintablesRittai 3D Design
Two Digit Counter
A two digit counter with counting range 00 to 99. The counter has a geneva mechanism which allows the numbers to automatically increment the second digit when the first digit goes from 9 to 0 again.…
- Downloads
- 290
- Likes
- 63
- Rating
- 4
P
PrintablesRittai 3D Design
Window Sill Shelf Extension (Wide Version)
Wide version of the window sill shelf extension I made previously. Category: 3D Printing
- Downloads
- 270
- Likes
- 22
- Rating
- 5
P
PrintablesRittai 3D Design
Dog Balloon
A simple dog balloon which can be a gift or used a display. The reverse side is flat, so no support is required Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Category: 3D Printing
- Downloads
- 250
- Likes
- 64
- Rating
- 3
P
PrintablesRittai 3D Design
Raspberry Pi Screen Mount for Ender 3 - OctoDash/Klipperscreen
A raspberry pi + screen mount on the Ender 3. It attaches to the front of the 4040 extrusion using existing fasteners. Required fasteners: 2x M5x8 - attaches mount to extrusion 4x M2.5x4 - attaches pi to mount The example shown is using…
- Downloads
- 229
- Likes
- 44
- Rating
- 0
P
PrintablesRittai 3D Design
Gameboy Color Power Switch
Power switch for Gameboy Color Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 100% Category: 3D Printing
- Downloads
- 204
- Likes
- 15
- Rating
- 0
P
PrintablesRittai 3D Design
Projector Stand
My projector was sitting on the bed head so when watching a movie we had to move to one side of the bed to watch to not block the projection. Now with this stand, it is at a height where we can sit wherever we want and less noise as it is…
- Downloads
- 104
- Likes
- 33
- Rating
- 0
P
PrintablesRittai 3D Design
Print in Place Police Car
A simple print in place police car based on a picture in a colouring book. Approx 17 hrs to print as a multi-colour with a few blockages in the poop chute. As a single colour it is a 1 hour and 10 minutes. Please excuse the layer shift in…
- Downloads
- 75
- Likes
- 11
- Rating
- 0
P
PrintablesRittai 3D Design
Mayonnaise Holder
Holds 1kg mayonnaise upside down. Print Settings Printer: Prusa Mini Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: eSun PLA Natural White Category: 3D Printing
- Downloads
- 66
- Likes
- 6
- Rating
- 0
P
PrintablesRittai 3D Design
Zig Zag Vase
This Zig Zag vase has 100 fins and can be scaled to almost any size. I am happy to help if you would like a custom profile vase. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 30%…
- Downloads
- 57
- Likes
- 9
- Rating
- 0
P
PrintablesRittai 3D Design
CR Touch mount for Blokhead Ender 3
This remix includes recess for M3 nuts and added material to move the CR Touch lower without using spacers. Attach sensor to mount using 2x M3 nuts and 2x M3x8mm or longer bolts. Attach mount to blokhead base / carriage using M3 x 8mm…
- Downloads
- 57
- Likes
- 3
- Rating
- 0
P
PrintablesRittai 3D Design
Kendama - Pokeball
Remix of https://www.printables.com/model/150764-kendama-authentic I have made a variation with the ball being a pokeball. Other changes I made was with the handle/Ken, adding a radius at the vertical and horizontal cross-section to…
- Downloads
- 51
- Likes
- 6
- Rating
- 0
P
PrintablesRittai 3D Design
Smartphone Desk Lamp Stand
Use your phone's LED light for a desk lamp. Your phone can be placed in a few positions (portrait and landscape) as it also doubles up as a phone stand. Print Settings Printer: Wombot Exilis XL Rafts: No Supports: Yes Resolution: 0.25…
- Downloads
- 44
- Likes
- 9
- Rating
- 0
P
PrintablesRittai 3D Design
Gameboy Color Zero XY Button Wells
Button Wells with drill hole guide for Gameboy Color Zero project. This is a remix of the Original Gameboy Zero button wells. Instructions: Super glue in position the button wells by resting against existing A-B button wells. Red lines…
- Downloads
- 30
- Likes
- 5
- Rating
- 0
P
PrintablesRittai 3D Design
A Very Merry Christmas Tree
A Very Merry Christmas Tree with presents! Category: 3D Printing
- Downloads
- 29
- Likes
- 7
- Rating
- 0
P
PrintablesRittai 3D Design
Headphone Deskmount Interference Fit
A simple single piece design that fits tightly to the desk. I have included the fusion360 file/step file for you to edit for your desk as required.
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesRittai 3D Design
XY Button Wells Game Boy Pocket
XY Button Wells for Gameboy Pocket Category: 3D Printing
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesRittai 3D Design
Eyesight Vision Improvement Tool
A simple tool to help restore your vision. Mainly used for near and far focus but can be used for tracking also. You can put it on your thumb or index finger. Fusion360 file included should you need to adjust for your fingers. STEP file…
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
PrintablesRittai 3D Design
Dowel Jig 8mm (for 12mm thick timber, 12.5mm dowel)
A simple dowel jig using 608 bearings for a metal to metal contact to prevent wear of jig if it was used only with 3d printed parts. The main body is a threaded design and can be fit onto various other adapters to suit various timber…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesRittai 3D Design
Dowel Jig 6mm (for 12mm thick timber)
6mm version of the dowel jig using 106 bearings. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 30 Filament: 3d Fillies PLA Dark Blue Category: Tools
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesRittai 3D Design
Dice Box
A dice storage box with bezels and snap fit lid. Print Guide: The numbers require colour change system like AMS in Bambulab. Assembly Guide: Bezel of the box assembles to the box body without glue but it is tight so slowly tap in place…
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
PrintablesRittai 3D Design
Stove Top Oil Splash Guard Brackets
Mount system for custom oil splash guard. Bottom Bracket 2 per side - 4 total. Top Mount (two piece design) magnet plate slots into mount body. QTY 4: 5x2mm Neodymimum Magnets per side - super glue recommended. Details of the splash guard…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesRittai 3D Design
Gameboy Zero LCD Panel Positioning + Screw Bracket
This 3D printed bracket is compatible with LCD panel back up monitor (77mm x 64mm) The purpose of this part is to position the LCD panel to the housing. Please ensure that your LCD panel is 77mm x 64mm. Custom size/design available on…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesRittai 3D Design
Simple Toothbrush + Floss Stand
A simple couple's toothbrush stand. Design of the opening would need to be modified to suit your toothbrush! Print Settings Printer: Wombot Exilis XL Rafts: No Supports: Yes Resolution: 0.1 Infill: 20% Category: 3D Printing
- Downloads
- 6
- Likes
- 0
- Rating
- 0
These are all currently available results.