Counting matching models…
I cant take credit for this, all I did was scale Decibel's awesome stem model on the x and y to fit the 5cm version of Lytta's beautiful spiral vase rose. I left the Z at Decibel's original hight to have a long stem. All credit really…
If you have a lot of hair you might want to scale this on the x and y. To use this first make a ponytail. Then stick the tool through the ponytail between the ponytail holder and your head with the point in the direction you want the ends…
With 4th of July coming up I designed a flag to celebrate. I would be easy to turn this into a fridge magnate, or if you print it in PETG you could use 3M tape and attach it to your vehicle. Feel free to scale this however you need. It…
This model is designed to print without vase mode. Put a pause print in when you slice the file in order to fill it. I printed at .2 layer heights and it worked just fine. The Gcode I included is for a mk3s+ and includes a pause to fill…
This is my first 3d model. No support needed if you print the cross laying down. I've added a model for Christs robe. I recommend you slow the printer way down for the best quality as it's quite thin.
This is a crystal inspired ring holder that prints easily. The rings in the picture are size 8, so if you have smaller fingers you might need to scale it down slightly. Nothing special is required to print this.
This is just a D20 dice with the numbers in order so it can be used to keep track of stats in your game. I recommend using a brim to make sure it stays put since it has a small 1st layer area, other than that standard settings work just…
Sometimes less is more so this is a simple yet elegant trophy design that can be tailored to your needs. Just pick 1,2 or all 3 of the blades and the base that corresponds with your choice. I printed the blades on my Prusa I3 MK3S+. For…
I’ve included two different models one that’s split in half (just print 2 and glue) and a whole one for SLA. I printed it at .15 layer hight and 4 perimeters to make sure it was strong enough.
update: I was finally able to print it and realized I had an error in the dimentions for the lids. I reuploaded the files with the corrections. Unfortunately my power is out right now so I can’t print this at the moment but I thought I…
The next installment in the Shrunken Dungeon line is a dice tower that fits in an Altoids tin and works with full size Chessex Dice. Prints at .2 layers without special settings. You need 2 of the shelves and 1 of each of the other parts.…
Just a simple coaster holder that will fit coasters up to 105mm in diameter. Nothing special is required to print this.
This is just a D20 shaped pendent with a tiny version for earrings. It prints just fine with with .2 layer height, however it will need supports for the rings, I recommend organic, and the earrings will need a brim due to the small…
This is a strainer lid for a mason jar. It does require a ring to secure it to the mason jar. I put some feet it can be set upside down in a sink without creating a seal. It doesn't require anything special to print. I know there is some…
For all the adventurers Christmas trees. .20 Depending on the orientation you choose you will need supports for the ring, its borderline of needing them on lower numbers.
This is a small collection of was seals that I designed. I tried printing them with fdm and the detail wasn’t great, but even worse, the wax would kind of stick to the layer lines making it difficult to remove the seal. I recommend…
Just a simple trophy cup to fit the awesome base from the chili champ. It doesn't require anything special to print.
Everything prints fine with standard settings though you would get more detail out of the tokens if you switch to a .25 nozzle. If you have your first layer dialed in you can print the map tiles upside down and use dry erase markers with…
This is my take on the classic Pythagorean cup. I've hidden the syphon in the wall of the mug so nothing immediately seems off. The Handle needs supports but they would mess up the syphon so you'll need to mask off the actual mug to make…
I haven’t printed this yet, I’ll get it started as soon as I get home. This bed is built to fit soozafone’s awesome Lucky 13 model. It can be found at https://www.printables.com/model/148367-lucky-13-printable-jointed-figure The mattress…
The 3rd piece in my Shrunken Dungeon line is a dice jail that brakes down into an altoids tin for easy transport. This prints just fine with .2 layers. You will need two each of both the long side and short side pieces.
I recommend increasing perimeters until the thin sections are solid. The shape lends to a lot of potential for leverage that could break it. Part 2 will need supports, I recommend organic. Answer below To put the puzzle together slide one…
Just a simple elegant vase that does hold water.
I recommend printing both parts with 100% infill. The shape lends to a lot of potential for leverage that could break it. Part 2 will need supports. Since some things are easier shown than told I have a video on how the two parts go…
Party serving bowls shaped like a flower. For dry food only. Make sure you enable vase mode as the petal is repurposed from another project I’m working on and Shapr3D was being uncooperative. You should be able to fit five or six petals…
I made this hide for my baby hognose snake. It‘s 80mm in diameter and 50 in height the hole is 25mm wide. Feel free to scale this as needed. It doesn’t require anything special to print as it prints upside down. I just have one request,…
The doors in my mobile home are too thin for most door knobs at big box stores so I made this shim to allow me to replace the old worn out knobs without altering the new ones. I imagine I’m not the only one with this issue. I went with…
For when the DM/GM knows best. These printed fine on end with standard settings, I did add a brim but it may not be necessary. Learn from my mistakes and make sure the z seam is on the long side. Have fun with these at your game night.
Everything prints fine with standard settings, but you do want to make sure your first layer is calibrated properly (the body of the selection shield is only two layers thick, and the big box and lid are both big parts that are prone to…
Zen Christmas is a collection of Christmas decorations for your zen garden. The Christmas Tree, Candy-Cane, and Crossed Canes models will need supports, I recommend organic, other then that there is nothing special required to print these.
I Just added labels to an existing model. At the moment I just have the following labels, I plan on adding more. KW1 SC1
I made this for my sister in law whose into pottery and I thought someone else on here might like it.
This is a set of Cherry Mx compatible key switches. I didn't want to give up any potential RGB capability in the keyboard so I skeletonized them. they are a little bit of a tight fit but they do fit. 100% infill and .2 layer height. No…
This is a Cherry MX compatible key cap with a Christmas tree on it. It prints just fine as .2 layers with no supports. Enjoy.
This prints just fine with standard settings. You will have to set a pause print somewhere around the 6mm mark to insert the hair tie into the tension posts, I recommend stretching the hair tie a bit and taping it down with masking tape…
This is a foot to fit on a 3/4 or 19mm diameter rod or dowel. This was designed to make a set of desktop shelves freestanding instead of having to rely on a wall to support them.
This set of trays was inspired by the Greek Peloponnesian war. Will you side with Athens or with Sparta?
This is a large easy knitter. I recommend using chunkier yarn than I did in my test. This could be the torso of a sweater or a panel for a blanket. The inner perimeter is just under 1300mm, but of course the knitted piece will be smaller.…
This is a simple SD card holder that hangs off the back of my Prusa I3. It holds up to 10 cards and doesn't require any supports. It will work on any thing with a 6-7 mm thickness.
We all have that one person in our lives with way to much gas. You will need to do a mid print color change.
The perfect dipping bowl for all your favorite sushi rolls. Its designed for the roll to be put in on its side. It doesn’t require anything special in order to print.
Prints just fine with standard settings.
These are all currently available results.
