Counting matching models…
Yet another desiccant container with a screw on lid. 48mm diameter, 2mm square holes. Print Settings Supports: No Resolution: Less than 0.3mm Notes: Printed with 0.3mm layers, the threads of the lid ended up less than ideal but still…
This is an experimental GT2 belt tensioner that is entirely printed with 4 parts. Original idea behind was that the tensioner should be balanced and possible to install without removing belts, therefore the 2-piece adjustment nut. You…
Redesigned the Marui classics' diff and idler gears with larger gear module and tooth strengthening side supports (with gear pitch diameters). Depending on the motor torque, might be ok in PLA, use Nylon if higher strength is needed.…
This is a remix of Tick007's GWAE to eliminate the need for the 'M8_nut_adapter' This thing includes only the body and the large gear, get the other parts from the original thing. The body needs two 625 bearings and the gear has a pocket…
Inspired by chriswal's Nema 17 Cycloidal Gear box prototype and Otvinta's tutorial I decided to give it a go and see if I could design and print a working hypocycloid reducer for Nema17 stepper with 11:1 ratio. I just basically scaled the…
Remixed the motor holder to fit the SkyRC Leopard brushless motor, may also work with other brushless motors that have the phase wires coming out from the side. Supports needed, rotate the model in slicer to appropriate printing…
This is my view on a delta end effector and matching carriages. I use them on a Kossel XL with 245mm diameter build area. They are designed to be used with Haydn's Carbon Fiber Arms and E3D v6. Arm spacing is 60mm to improve stability.…
I wanted to build on the great cycloidal gearbox by chriswal. Changes and modified parts listed below, get the remaining unmodified parts from the original design by chriswal. getriebedeckel -> getriebedeckel 625ZZ: Bearing changed to 625…
The plastic retaining ring of our ErgoRapido lost its 'claws' over time of heavy use. To fix the otherwise perfectly working vacuum cleaner, I designed a more rigid version of the retaining ring, hopefully others can find it useful also.…
I made a 20mm wide custom heatblock out of copper for my E3D v6 and wanted a silicone sock for it. As the heatblock is custom I needed to design and mold the sock for it. There probably aren't many heatblocks out there that a sock out of…
Designed this light weight holder for the SkyRC Leopard V2 ESC, primarily designed for the Marui Big Bear that has a suitable space for it in the back of the chassis. Drill holes to the mounting position of the chassis and use M3 screws…
I designed these clips to hold the drive battery of the Marui Big Bear. Potentially works also with other Marui R/C cars with the same/similar chassis. The clips snap over the original plastic hooks in the chassis for the battery holding…
These are mounting brackets for a BeagleBone Black (BBB) and two 40mm fans. They are designed to be mounted horizontally inside a delta printer bottom triangle underneath the build bed, but surely possible to use other mounting…
This is a bracket to mount the Greg's Wade's accessible extruder horizontally. This was designed primarily for mounting to inside of a delta printer top triangle with 2020 profile. It has screw holes to fix it from two sides (top and…
This is a clamp for mounting a 10mm thick soapstone plate to a delta printer. At minimum three pieces needed, preferably six. Why soapstone? The thermal properties of soapstone are quite ideal for this application, it stores heat and…
These are all currently available results.
