Counting matching models…
For best results, print vertically so that no supports are needed on the fin and it remains as clean as possible and use a 1-layer skirt at the bottom. Fins were designed with a tilt assuming that 3 fins will be used. A fin spacer is…
To recreate the image, print the STL, paint the colors on using acrylic paint, and then add additional leaves/plant decorations using a 3D pen. The 3D pen is not necessary but adds detail.
Place the rods through the holes under the car and attach wheels on both sides. Depending on the printer used, the rods may need some sanding to move freely. Painted using acrylics.
A small model rocket nosecone with holes for peg attachme and a compartment to fit a Pnut/altimeter inside.
See bio/profile for fins that were designed to be used with this fin spacer. Should generally work for most inserting fins that need to be 120 degrees apart, but the base on which the fin is glued onto the 3" body tube must be under 3mm…
Base and lid for a weight casing that can be used to slide inside of any 3" diameter tube. The amount of clay can be adjusted to create different weight blocks. These are useful to use in model rocketry to add weight to the rocket in a…
These are all currently available results.
