P
PrintablesTWC
Simplified Skadis Wallmount
I simplified this model so that it can be printed without supports and use regular adhesive strips instead of the picture hanging “velcro” ones.
- Downloads
- 526
- Likes
- 85
- Rating
- 4.4
All models
Counting matching models…
P
PrintablesTWC
Audi TT mk2 cupholder expander
I created this for my Audi TT mk2 (2013) so that I can fit larger items in my rear cupholder. It fits a SIGG 1L (81.78mm diameter) bottle very snugly. I printed mine in PETG with 0.28 layer lines.
- Downloads
- 162
- Likes
- 16
- Rating
- 0
P
PrintablesTWC
Airtag Money Clip w/ no lip
I really liked ClassicGOD's Airtag money clip but since my use case is for using the Airtag w/ a journal, it won't be taking it on and off frequently, so I don't need that lip which makes my journal bulkier. I printed it on edge with a…
- Downloads
- 139
- Likes
- 15
- Rating
- 0
P
PrintablesTWC
Breville Bambino 52mm portafilter adapter for Baratza Encore
I remixed the existing model to attach the sides to the main body for easier use and less assembly. You need to print the grounds tray from the original model. I recommend also printing a funnel, although I haven't yet. I'm also not happy…
- Downloads
- 106
- Likes
- 10
- Rating
- 0
P
PrintablesTWC
Burrow Carta coffee table leg
We found a Burrow Carta coffee table in the trash and rescued it! It needed some glue and some legs. You need 8 14mm M6 screws, which I found from Monster Bolts on Amazon in a 10 pack. I created the set of legs to point to the side. If…
- Downloads
- 88
- Likes
- 11
- Rating
- 0
P
PrintablesTWC
Vitamix Blender Cup Adapter gasket
We like to make smoothies w/ our Vitamix using the “personal cups" which screw on to an adapter base that contains the blades. The gasket (or o-ring) on our adapter has become stretched over time and doesn't always make a good seal when…
- Downloads
- 71
- Likes
- 5
- Rating
- 5
P
PrintablesTWC
Precision screwdriver bit adapter
I wanted to use the screwdriver bits with my precision screwdriver handle, so I made this adapter. I will only use this occasionally, so I printed in tough PLA. I suggest 100% infill, using support (tree supports worked for me), and a…
- Downloads
- 58
- Likes
- 6
- Rating
- 4
P
PrintablesTWC
Aqara doorbell chime "hat"
Created a top for the Aqara doorbell holder so that it blended in more w/ the wall. Meant to be used with the chime mount it's based on.
- Downloads
- 49
- Likes
- 2
- Rating
- 0
P
PrintablesTWC
Basic HVAC vent redirect (297mm X 195mm)
I couldn't find an existing HVAC vent redirect which was sized for my vent and could also fit on my printer. This model is sized to fit my vent and fit diagonally on a 256mm bed. Printed with no brim and hybrid tree supports in a tough…
- Downloads
- 48
- Likes
- 12
- Rating
- 0
P
PrintablesTWC
Split Sisyphus
I split the statue from the base for easier and faster printing and created a nameplate to glue onto the front, for customization.
- Downloads
- 46
- Likes
- 5
- Rating
- 0
P
PrintablesTWC
Thicker rings for foot massager
I remixed the rings to make them thicker so that the the massager would not bottom out when used. Printed in generic TPU w/ 2 outside walls, and 2 top & bottom shells, at 0.20mm layer lines w/ 15% infill.
- Downloads
- 38
- Likes
- 2
- Rating
- 5
P
PrintablesTWC
De-branded Prusa Toolbox lid
I liked the toolbox but not the Prusa branding. I don't have a real photo of it because it's a gift for my nephew and I've already wrapped it. I printed both the bottom and the top lid on a textured PEI sheet and it came out great.
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
PrintablesTWC
SIGG protective bottle top
I use my SIGG bottle as a travel bottle. It's durable and a great size. Previously I've used the “sport cap” which is large and bulbous, because it has sides which protect the bottle's drinking surface. My backpack has unprotected side…
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesTWC
Audioengine D1 volume knob hat
I wanted a way to see what volume my Audioengine D1 was set to. I originally printed the model truncated as a quick test piece but it fit nice and snugly and so I just kept it as-is. Printed in silk PLA w/ 0.2mm layer height.
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesTWC
Chicken Nugget Ornament - split
This will print more quickly and easily than the original version. Print as-is and glue the two halves together. Thanks for doing the original hard work, 3d_drucker_nic!
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesTWC
CPAP nasal mask towel bar drying rack
I was hanging my CPAP nasal mask with 2 metal hooks to dry after washing it every morning and was worried about potentially damaging the mask. It was also just not the most stable. So I designed this drying tray which hangs from a towel…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesTWC
Bissell Sweeper Snow Shovel Handle Adapter
The handle which comes with the Bissell floor sweeper is pretty crappy. The joints don't stay screwed together well, even with loctite and strong tape. I broke a snow shovel this winter and had the idea to use its handle with the Bissell…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesTWC
JBL 3.1 soundbar mount for Hisense SmartTV 4K FFM
I hung our TV on the wall and wanted to lift the soundbar off the console as well. I designed mounts which fit into and screwed into the attachment points for the legs, using the same screws. The mounts extend down enough so that there is…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
These are all currently available results.