P
PrintablesChaostheoryBOT
Remix of LightWeight StealthBurner with Updates
Thanks to @Mike_1534993 for uploading the step file. See the difference field to find my changes.
- Downloads
- 291
- Likes
- 39
- Rating
- 5
All models
Counting matching models…
P
PrintablesChaostheoryBOT
Skeletonized CW2 with filament sensor + Cover
Sleletonized CW2 inpired by @PowenChi_1306772 versions of the cw2, but made from scatch using the original newest motor plate and the filament sensor version of cw2 linked as remix. The Stealthburner on the picture is this one. I might…
- Downloads
- 186
- Likes
- 36
- Rating
- 0
P
PrintablesChaostheoryBOT
Cable Organizer with Internal RJ45 cap
Just a cable clip that holds on to the rj45 port. For now only in a similar size as the “medium” version of the original. I might make a bigger one in the future.
- Downloads
- 126
- Likes
- 12
- Rating
- 4
P
PrintablesChaostheoryBOT
Can-Am Ryker Blinker Mounts
Update (2024-08): New mounts for m8 blinkers. My blinkers from louis keeps breaking on the rubber part. I think it might be because the m10 nut is thight agains the metal and keeps vibrating the blinker. I found basically the same cob…
- Downloads
- 118
- Likes
- 8
- Rating
- 5
P
PrintablesChaostheoryBOT
Hygrometer Spool Mount
Update (2022-07-06): I made a updated version with thicker clamps that won't break that easy and a slightly different design on them. I also created a new “special” design one. A mount to secure those cheap round humidity sensors in a…
- Downloads
- 118
- Likes
- 21
- Rating
- 5
P
PrintablesChaostheoryBOT
Notebook Stand (Lenovo T14)
Just a Stand for a Lenovo T14 (or any other Laptop that fits). Print out the 2 Stands, one connector and the TPU-Damper twice.
- Downloads
- 115
- Likes
- 18
- Rating
- 5
P
PrintablesChaostheoryBOT
Telekom Hybrid 5G Empfänger Ständer
Nur ein Ständer um den 5G Empfänger der Telekom Hybrid Tarifen innen zu stellen. Einfach drucken und wie die Originalabdeckung befestigen. In der STEP ist noch ein 2. Teil - Mehr oder weniger Ersatz für das original, aber nicht Wasserdicht.
- Downloads
- 94
- Likes
- 1
- Rating
- 5
P
PrintablesChaostheoryBOT
Anycubic i3 Mega Bed cable guide
A new guide for the bed cable that doesn't bring it out the back, because i have no space behind my printer. Use two m3 screws for the one on the frame, and if you use my mosfet mount you can use 2 nuts to hold it and the cable guide in…
- Downloads
- 92
- Likes
- 15
- Rating
- 3
P
PrintablesChaostheoryBOT
Stealthburner Body for Sunon Fan
The Stealthburner body modified to center the Sunon blower fan.
- Downloads
- 64
- Likes
- 16
- Rating
- 5
P
PrintablesChaostheoryBOT
360to280mm RAD Adapter FractalDesign Torrent
UPDATE 15.11.2013: Check out the slim version to fit a bit bigger GPUs: https://www.printables.com/de/model/648535-slim-fractaldesign-torrent-rad-adapter It is designed to be mounted to a 280mm Radiator and then with long enougth screws…
- Downloads
- 48
- Likes
- 5
- Rating
- 5
P
PrintablesChaostheoryBOT
Voron Trident Camera Mount with cable cover
It's a remix of the model from Res16. I added a cable cover to the part to hide the ffc cable. Print the original body from Res16, it still fits this part.
- Downloads
- 48
- Likes
- 5
- Rating
- 5
P
PrintablesChaostheoryBOT
Anycubic PEI Bed Fysetc ADXL Mount
A mount to put the Fysetc PIS on the bed of anycubic printers. It turns out on the MK4 extruder for the Mega printers the PIS fits in the fan screws without problems. I designed this to also use it on my bed. If you have the official…
- Downloads
- 48
- Likes
- 7
- Rating
- 0
P
PrintablesChaostheoryBOT
Voron Hongshikang Camera Mount
This is a Mount vor a Hongshikang Camera 90x15 camera module on 2020 extrusions. Use two m3x8mm screws to screw it to the extrusion and 4 m2x10 self tapping screws to screw the cover and camera in together. I used this one:…
- Downloads
- 45
- Likes
- 7
- Rating
- 4
P
PrintablesChaostheoryBOT
Voron M4 Mount for Anycubic i3 Mega (S)
A mount to put a Voron M4 in place of the official Anycubic extruder. Use the original m3 screws to put it on the printer and two M5 heatinserts and screws to put the M4 on the mount, that's it (Apart from calibrating the extruder of…
- Downloads
- 44
- Likes
- 3
- Rating
- 0
P
PrintablesChaostheoryBOT
Parametric slide on cable holder
Parametric cableholder. Just glue base in place and slide the holder over it. I use it with 3m VHB 19mm tape. I would recommend to print the holder in the orientation of the bigger one in the picture. Print Settings Printer Brand:…
- Downloads
- 41
- Likes
- 11
- Rating
- 5
P
PrintablesChaostheoryBOT
Anycubic i3 Mega WAGO Mount for bed
Similar to the WAGO mount for voron printers, I designed this to use wago clips as quick connect of the bed power cables. I think the picture says it all. Just slide them in. It's for use with the Wago 221-412 (4mm²), the 6mm² will not…
- Downloads
- 40
- Likes
- 12
- Rating
- 5
P
PrintablesChaostheoryBOT
Anycubic i3 Mega BTT Manta E3EZ + Fan + Mosfet mount
A mount to put in a BTT Manta, with fitting fan mount and one mosfet mount. I decided to let the extruder run directly from the board and just use one of my existing mosfets for the bed. Unfortunately I just realised that I missed taking…
- Downloads
- 33
- Likes
- 5
- Rating
- 0
P
PrintablesChaostheoryBOT
TS1C Solder Spool and Brass Wool Holder
Holders to mount to your TS1C Base You will need m4x4 or m4x5 screws or use the original. For the solder spool holder there a 2 “holders”. One is for using a voron style heatset insert and one is to just screw into plastic. I made both,…
- Downloads
- 33
- Likes
- 12
- Rating
- 0
P
PrintablesChaostheoryBOT
SLIM FractalDesign Torrent RAD Adapter
It is designed to be mounted to a 280mm Radiator and then with long enougth screws through the front of the case and the fans into the radiator. The Adapter and fans will be mounted with those screws and the rad will be mounted to the…
- Downloads
- 25
- Likes
- 0
- Rating
- 0
P
PrintablesChaostheoryBOT
RykerConnect - CAN-AM Ryker Accessory Display
This is still Work in Progress! I have been working on and off for about a year on this. I am still not nearly finished and honestly I don't know if I ever will. I will be uploading the code for the electronics on github, so anyone can…
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
PrintablesChaostheoryBOT
Voron Trident 300 Stealth Skirts for WaveShare 6.25 LCD
Trident 300 Stealth Skirts for WaveShare 6.25" HDMI LCD. Adds 2 Keystone modules to the front and space for an LED-Stripe. This is the display: https://www.waveshare.com/6.25inch-720x1560-lcd.htm
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
PrintablesChaostheoryBOT
VORON TRIDENT 300 STEALTH SKIRTS 4x Keystone
Stealth Skirt Rear with 4 slots for Keystone Modules
- Downloads
- 16
- Likes
- 5
- Rating
- 0
P
PrintablesChaostheoryBOT
Yamaha P-515 Headset Mount
Just a Headset Holder for the Yamaha P-515. Don't know if it will fit other models. It uses the screws from the original stand - L-515, so should fit any model with this stand. Just use 2 m3 threaded inserts and screw the two parts…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesChaostheoryBOT
Internal USB Splitter Case
Just a case to glue in an internal USB splitter. :) Category: Tool Holders & Boxes
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesChaostheoryBOT
ASUS PCE-AX58BT Antenna mount
Part to mount the antenna of the ASUS PCE-AX58BT card. I would recomment printing in the orientation of the Cura screenshot. I did not start the part with the right orientation unfortunately. :) Currently designed to fit a width of…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
These are all currently available results.