P
Printableslion7718
Silica Gel Container-70mm
The 60mm container works fine in most filament spools, but it falls into some plastic & cardboard spools. So I made a 70mm container to fix this.
- Downloads
- 231
- Likes
- 25
- Rating
- 4.67
All models
Counting matching models…
P
Printableslion7718
Dual Z Axis Leveling Block
Print 2 Blocks with at least 20% infill.
- Downloads
- 171
- Likes
- 11
- Rating
- 5
P
Printableslion7718
MIKA3D Cardboard Ring For Bambu AMS or Filament Dryers
Remixed to fit OEM MIKA3D Cardboard Spools. Size is 195mm
- Downloads
- 135
- Likes
- 8
- Rating
- 5
P
Printableslion7718
Magnetic Flat Light Switch Cover 6x3
No Supports Res: 2 Infill: 20 Print Time: 2 Hours The magnets are press fit.
- Downloads
- 128
- Likes
- 24
- Rating
- 5
P
Printableslion7718
Sovol Zero Magnetic Buildplate Holder
Magnetic plate holder that can be put on either side of the Sovol Zero. Model needs 5x 8x3 magnets. No supports needed. Printed with 10% infill.
- Downloads
- 126
- Likes
- 36
- Rating
- 5
P
Printableslion7718
HueForge Frame 180x180
Res: 2 Infill: 20% Gyroid You cannot print this on the A1 Mini.
- Downloads
- 117
- Likes
- 35
- Rating
- 5
P
Printableslion7718
Sovol Klipper Screen Display Cover Zero & SV08
For users who want to re-print the Display Cover in a different color. Res: 2 Infill: 15% Walls: 4 Support: Tree Organic Files were printed in the orientation in pic 3. Sovol sent me the files & gave me permission to upload to Printables.…
- Downloads
- 90
- Likes
- 6
- Rating
- 0
P
Printableslion7718
OnePlus Watch Stand
I couldn't find a OnePlus watch stand, so I made one. Print cable runner side down, with buildplate support. Slice & rotate to check for seam position. It's about a 4:30 hour print.
- Downloads
- 61
- Likes
- 11
- Rating
- 5
P
Printableslion7718
Shield TV Stand With HDD Slot
Res: 2 Infill: 20% Use Adaptive Layers For Nice Finish Print Time: 7 Hours
- Downloads
- 42
- Likes
- 7
- Rating
- 0
P
Printableslion7718
Virtjoule Heat Insert Tip Case-B08B17VQLD
The Virtjoule Heat Insert Tips B08B17VQLD come in a 3d Printed case without a lid. So, I just designed a very simple cover for the case to slide into. The bottom was made a little shorter so you can grab & pull the case out. Virtjoule…
- Downloads
- 36
- Likes
- 7
- Rating
- 5
P
Printableslion7718
Mobile Home Outlet Cover
Res: 2 Infill: 0% Notes: Change Buildplate Support Density To 10 5 Walls Time: 4:25 Hours This is a remix: https://www.thingiverse.com/thing:3163496
- Downloads
- 35
- Likes
- 4
- Rating
- 0
P
Printableslion7718
Crate Handle
Res: 2 Infill: 15% Gyroid Walls: 8 Takes about an hour to print depending on printer.
- Downloads
- 32
- Likes
- 5
- Rating
- 0
P
Printableslion7718
HRB Hex Driver Screwdriver Collar
This is a removable collar for the HRB Hex Drivers. Inner Diameter: 3.2mm Outer Diameter: 19.7mm Print Time: 5 min. This will keep the drivers from rolling around. You can print in different colors or just exchange collars as needed.
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
Printableslion7718
Solar Ground Light Plate
I made this so I use some solar landscape lights on a fence rail & post. The plate is pressure fitted into the groove. Print in ASA or similar filament Res: 2 Infill: 20 Walls: 8 Print Time: 2 Hours Lights I used are:…
- Downloads
- 24
- Likes
- 4
- Rating
- 0
P
Printableslion7718
E3P Screen Cover
Made for the Ender 3 Pro, it might fit other Ender models. Res: 2 Infill: 30% (For Ball) Print Time: 55 Min. No Supports
- Downloads
- 23
- Likes
- 2
- Rating
- 5
P
Printableslion7718
Touch Light Base Plate
I needed a way to attach an LED Light Bar base without using 2 sided tape. Print using your normal settings…no infill. Print Time: 30 min. Base is snap fit, no glue needed. 25cm Led Touch Control Rotating Table Lamp from Temu:…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
These are all currently available results.