Counting matching models…
4 versions are available: with (recommended) and without 4 mm hole for PTFE tube and with (recommended) or without side clips to ensure that rig won't open midprocess (though connecting pins should fit quite tight and hold it good enough…
Recommended ironing of top surface (front of finished print).
Lower/white part's height is 1 mm, rims/black parts are also 1 mm (i.e. 2 mm total). Setting layer height to 0.20 or 0.25 mm is preferable for convenience of color change. Infill - 100%. Using ironing is advisable for all top surfaces to…
Attached project file was printed using PETG on Ender 3 V3 SE. Set top and bottom layers to 0 to get cool look depending on which infill patter you've selected.
Shaft hole is 5.1 mm, fits just right in my print. Optionally a 5x3 mm magnet can be inserted on front for better fixation. Snakes are thin, so squishy and wide first layer would be good to avoid gaps. Added mirrored versions as I just…
Had some corner curling issue, most likely due to room temperature and drafts, otherwise it's working as intended.
Holes are there for plastic savings, actually, bottom wall can be skipped altogether in slicer.
My print was made with PETG for strength, so I've also added an optional TPU sleeve to make it a bit quieter and hit the counter softer. For main part 3-4 walls are good with 15-20% infill (I've used support cubic). I've used painted…
Same as original, but removed some unnecessary/artifact surfaces on the inside.
Toothbrush holder for mounting on cabinet using double-sided tape (I preferred tape, because my wife gave me a very strange look when I approached new cupboard with a drill) and/or screws (4.5 mm holes). With embossed images for those who…
I've added f3d file for convenience. Hole dimensions are depended on drill chuck dimensions, so you can edit them in parameters.
These are all currently available results.
