Counting matching models…
I have added a smaller version as requested i have not printed it myself any problems let me know enjoy same Swap Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: PLA Black…
PLA Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #9 at 0.8mms Red until layer #16 at 1.36mms Cream until layer #19 at 1.6mms (bone,skin or any off white ) White until…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #13 (1.12mm) swap to Bone White (cream or any off white) At layer #16 (1.36mm)…
Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Grey At layer #13 (1.12mm) swap to Silver At layer #20 (1.68mm) swap to White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #8 at 0.72mm Pine Green until layer #14 at 1.2mm (Dark Green) Green until layer #20 at 1.68mm (Light Green) White for the…
bullet baby HR Giger Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 88.08x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #10 at 0.88mms Gray until layer #17 at 1.44mms White until end
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #6 at 0.56mm Red until layer #9 at 0.8mm Gray until layer #10 at 0.88mm Orange until layer #14 at 1.2mm Yellow until layer…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #15 (1.28mm) swap to Silver At layer #19 (1.6mm) swap to White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #9 at 0.8mm Dark Green until layer #15 at 1.28mm Coffee until layer #17 at 1.44mm Light Green until layer #19 at 1.6mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #3 at 0.32mm Gray until layer #6 at 0.56mm Bone White until layer #14 at 1.2mm (or any off white) White for the rest. This…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #14 (1.2mm) swap to Bone White (cream or any off white) At layer #18 (1.52mm)…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #17 (1.44mm) swap to Orange for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 149.67x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Project: nice ass Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 156.9x220mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #6 at 0.56mm Pure Yellow until layer #27 at 2.24mm White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #12 (1.04mm) swap to White At layer #16 (1.36mm) swap to Black At layer #18…
These are all currently available results.
