Counting matching models…
F1 2022 looking body for the HPD EVO developed by Kent Asplund. It requires the ESC to be mounted vertically. Print vertically and halo doesn't need supports. Requires 2x M3x6-10mm fasteners to attach the nose to the body from the nose…
Tamiya C11 Rear Wing and Diffuser. It is modeled to be a closer representation of the real car with actual down force of 95 grams at 30mph. The top smaller airfoil needs to printed with supports on the underside and printed slow because…
Here is a F1 helmet with a visor for RC cars. Print the visor template 1:1 and use it as a template to cut the visor from a plastic soda bottle or the thin plastic that comes with many items when shipped. The pins work fine on my printer…
Tamiya Mercedes C11 Mirrors. 2 Piece with no supports needed. Print vertically and I used a 0.2mm nozzle with 0.1mm layer height for best finish with zero infill. See picture for how to assemble them with superglue and I also used…
This a wider F1 body so you don't to place the ESC vertical and is also multi piece for smaller printers and can be multi color. It needs some glue for the lower venturi portion. Please take your time and I recommend not bonding the…
Wing bracket goes inside the rear pod pocket; see the picture of reference. I used 0.12mm layer height for the best print quality. I used Polymaker PLA Pro and it work well but my latest model is made out of Polymaker PLA Polymax which is…
Print with the out side face of the wheel down with support for the outer tire lip and center face only. Wheel face grove doesn't need support. 15% infill is plenty with 3 or 2 wall loops.
This right pod clears the housing bore found on brushed motors vs flat face brushless motors
These are all currently available results.
