127 models
Designed in fusion 360. Supports are going to be needed for this functional print. No multicolor unit is needed. Best way to print all models together is on their sides. 100% infill will result in the strongest parts possible. Please…
Designed myself in fusion 360 to organize my toolbox. Holds various tools as shown in photo. I created this 12-plier version then wanted to add on to it, so I cut the same model in slicer to print just the extra piece shown in photo.…
Designed myself in fusion 360. I have included and mountable hook file designed for this scraper if you would like to mount to printer or another surface. Hole is 10mm diameter. Please like, follow, rate and upload your makes. Check out…
Designed myself in fusion 360. Scraper requires NO AMS, NO SUPPORTS. The plus 4 mount does require supports but very little if you orient part with the round hook horizontally. Flat bottom hook also will require supports. Please like,…
Designed in fusion 360. Model as is all letters and numbers are 100mm tall. Can be scaled to make them smaller or bigger. No supports are required. No prime tower is needed. For single color printers add pause at layer 7 to change colors…
Modeled in fusion 360 using the gridfinity design. May have to cut in slicer and print in multiple pcs, but it is worth it to have these organized. Letters are extruded so a pause can be added to change color for the letters if needed.…
Designed myself in fusion 360. Model is full print in place with cutter intergraded. Fits your typical Scotts gift Wapping tape rolls with inside diameter of 26mm and width of 20mm. Model does have the magnet holes on the bottom. The…
Designed in fusion 360. Supports will be required for the holder only. Recommend using tree like supports. No multi material system is needed. Single color printers, for holder add a pause at layer 32 to change color of raised curved…
Designed in fusion 360. File is already positioned to print. Ring size file is 19mm id. Can be scaled to fit any finger size. Measure knuckle area and add some play before printing and scale in slicer to ensure a safe comfortable fit.…
Designed in fusion 360. This tool works and has been tested. Be advised that this tool does have thin ends so do not over tighten or the ends may break. Prints in less than 1 hr so it's perfect for an emergency fix of a bad valve. I have…
Designed in fusion 360. Dimensions are provided in the photos for both files. There is a heavy duty 15mm thick version and a lighter duty 10mm version. Works with fishing line or any line that is 3mm thick or smaller. Use a sawing motion…
Designed in fusion360 to clean precision milling machine tables from metal chips but can be scaled to fit pretty much any t-slot. Please like, follow, rate and upload your makes. Check out my profile for many other models.
designed myself in fusion 360 using the gridfinity design. NO AMS REQUIRED just add pause if you don't have a multicolor box. Added pocket for ¼ inch impact adaptor to reduce filament waste and make use of the extra space. Please like,…
Designed myself in fusion 360. Threads are 6mm and may be a tight fit just due to 3d printing threads. Make sure to screw on straight. The higher the infill and the more walls used the stronger it will be. I've included a no text model…
Designed in fusion360. No supports are needed. Thank you for viewing. Please like, follow, rate and upload your makes. Check out my profile for many other models. Happy New Year.
Designed in fusion 360. Can add text to both sides of the tags. You can scale up in your slicer if you would like the tag bigger. Was designed cat sized. Holds on to a pet color with small key ring. Please like, follow, rate, and upload…
Designed in fusion 360. No supports or prime tower are needed. For single color printers wanting colored raised edges add a pause at layer 11 or 12 whichever looks correct on your slicer. Please like, follow, rate, and upload your makes.…
Designed in fusion 360. Filleted rounded corners for pet comfort. As is model dimensions are in the photos in mm. Custom text can be added in your slicer software. No need for cad software. No ams needed and no supports. For color change…
Designed in fusion 360. Files are in proper printing position. Print all one color with the full assembly file or print both arms and press pin separate for 2 different colors. Pin is a press fit so ensure proper position then hammer…
Designed in fusion 360 using the gridfinity design. Holds most brand metric ½ inch drive sockets 10mm through 29mm. I included a pic of all hole dimensions if you would like to check before printing. Letters are raised so a pause can be…
Designed in fusion 360. Print at 100% infill for best strength. Can be scaled up in slicer if you would like it to be thicker. Please like, follow, rate, and upload your makes. Check out my profile for many other models. Thanks for viewing.
Designed myself in fusion 360. Could not find much standard USA imperial system organization files for standard drills so I designed this file myself. Thank you for viewing. No supports are required. Please like, follow, rate and upload…
Designed in fusion 360. Designed that no supports are needed. Protects belts and pants from wear due to clipping and unclipping. Check dimensions in photos. Should fit most belts, if your belt is bigger you can scale up. Please like,…
Designed myself in fusion 360. Perfect for pocket carry of nicotine pouches, small screw or whatever. Feel free to scale and personalize with your own text or photos on the lid. NO AMS or SUPPORTS. Please like, follow, rate, and upload…
Designed myself in fusion 360 using the gridfinity design. Fits most brand 3/8-inch drive metric sockets 10mm through 19mm. I included a pic with all hole dimensions in mm. Letters are raised so a single-color printer can add a pause to…
Designed in fusion 360 using the gridfintity design to organize the craftsman 33076 ¼ drive imperial socket set. May fit other brands but please check dimensions before printing. Letters are raised so a pause can be added for color change…
Designed in fusion360. No supports are required. May have to rotate in slicer. Please like, follow, rate and upload your makes. Check out my profile for many other models. Thanks for viewing
Designed in fusion 360. No supports are needed. The more infill and walls used the stronger they will be. Please like, follow, rate and upload your makes. Check out my profile for many other models. Thanks for viewing.
Designed in fusion 360. No supports and multicolor system are required. For single color printers add a pause at layer 17 for color changing the letters. Thanks for viewing, please like, rate and upload your makes. Check out my profile…
Designed in fusion 360 to organize toolbox. Printed in petg as I'm using in a non-temperature-controlled shop. No ams or supports are required. Please like, follow, rate and upload your makes. Check out my profile for many other models.…
Designed in fusion 360 using the gridfinity design. I included photos of all holes if fitment check. Letters are raised so a pause can be added for single color printers. Please like, follow, rate and upload your makes. Check out my page…
Designed myself in fusion360 using the gridfinity design. Should fit most brands but I included a pic with dimensions for all holes in mm. Letters are raised so a stop can be added for single color printers if wanted for a different…
Designed in fusion 360 using the gridfinity design. I included photos of all hole dimensions for fitment check. Letters are raised so a pause can be added for single color printers. Please like, follow, rate, and upload your makes. Check…
Designed in fusion 360. Supports will help with text models. Please like, follow, rate, and upload your makes. Check out my profile for many other models. Merry Christmas and happy holidays.
Designed myself in fusion 360. Should work with many socket brands. I'm using a mix of Blackhawk and craftsman brands in the holder in pics. For single color printers add a pause to change color for letters if wanted. Thank you for…
Designed in fusion 360 using the gridfinity design. Dimensions were drawn to fit the craftsman 33089 metric ¼ inch drive set. May fit other brands but please check the dimensions before printing. Letters are raised so a pause can be added…
Designed myself in fusion 360 using the gridfinity design. Please like, follow, rate and upload your makes.
Designed in fusion 360. Add custom text like kids' names below the mouse feature. No cad needed text can be added to the model in the slicer. Due to the nature of the switch mounted to the wall the back has to have clearance so supports…
My popular hat clip design but themed as a gift for USA serviceman and women. NO AMS NEEDED. For single color printers add a pause at layer 45 for text color change. Fits any ball cap hat. Supports are required; I use tree supports with…
Designed myself in fusion 360. Default inside diameter is 20mm. Can be scaled to fit any finger. For single color printers set a pause at layer 15 and 27 to have colored ring as shown in photos. For multicolor printers make sure to paint…
Designed fusion 360. No supports are needed. Please like, follow, rate and upload your makes. Check out my profile for many other models. Thanks for viewing.
Designed myself in fusion 360 to make a holder that could be mounted to my worktable to hold my tape measure. Holder fits all my various 16 foot and smaller tape measures including craftsman, Stanely, taskforce, etc. Printed in sunlu…
Designed in fusion 360. No supports are needed. needs low infill 10% or more will be fine. Feel free to edit anyway you want. Add text make hangable or even light up. Please, like, follow, rate, and upload your makes. check out my profile…
50 states of the United States of America on my hat clip design. Supports are required; I use tree supports with no issues, and .04 nozzle. Theme with your state's colors, team or whatever you want. Print with the text up. For single…
Designed in fusion 360. No supports or multicolor unit is needed. For single color printers wanting 2 colors add a pause at layer 11 or 12. Print lying flat on build plate raised text up. Please like, follow, rate and upload your makes.…
Designed in fusion 360 using the gridfinity design to organize ¼ inch drive metric sockets. Added tray to hold ¼ inch impact magnetic bit holder to make use of the full part and reduce filament waste. works with many brands, these in…
Designed myself in fusion 360 using my hat clip design. Supports are required, I recommend tree supports as I have no issues with them. Prints fine with .04 nozzle. For single color printers add a pause at layer 45 to change color for…
Designed myself in fusion 360. No Supports are needed even if slicer suggest. Print laying down to avoid supports. Included are 3 files for a curved bowl and a flat model that can be mounted with tape to any toilet style and a square hook…
Designed in fusion 360. No supports are required. Size diameters of the models are in the photos. To customize own text, download the no text model and add text on your slicer. The text models are raised so a stop can be added at layer 16…
Designed myself on fusion 360 to hold a typical 3oz WD-40 can have available when needed. Has nozzle holder as well as its always gets lost. Can be mounted with screws or double back taped to any surface. NO AMS or SUPPORTS REQUIRED.…
Designed in fusion 360 using the gridfinity design to make an organizer for the Walmart hyper tough brand 3/8-inch drive Allen socket set. May fit other brands but please check dimensions before printing. Letters are raised so a pause can…
Designed in fusion 360. Model size as is, is perfect for a small Christmas tree decoration or hanging near gamming desk. If it is smaller then you like you can scale up in your slicer. No supports or multicolor system is needed as text is…
Created model using the gridfinity design myself in fusion 360. These are mixed brand adaptors. Letters are extruded so a pause can be added to color change. Thank you for checking out this print and please like and upload your makes for…
Designed in fusion 360 using the gridfinity design to make an organizer for the hypertough 3/8 drive metric allen socket set. May work with other brands but please check dimensions before printing. Letters are raised so a pause can be…
Designed in fusion 360. NO AMS NEEDED. Add pause at layer 45 for the Prusa letters and 51 for the logo to change colors on single color printers. Will print with a .04 nozzle. Tested fit on many ball cap hats. Supports are required. I…
Design in fusion 360 using the gridfinity design to make a simple labeled bin to hold needle files. Letters are raised for single color printers to add a pause for color change. Pocket dimensions are in the photos. Please like and share…
Designed in fusion 360. Included 3 files. Merry Christmas text with hole, no text with hole, and no text no hole. No supports are required. Will need multicolor system to have colored text. Most slicers have a text add feature, so no cad…
Designed in fusion 360. No supports or multicolor unit is needed. For single color printers add a pause at layer 11 or 12 for the raised text and border if you want a separate color. Print lying flat on build plate with raised text up.…
Designed myself in fusion360 for our new kitten. I customized the dish to have his name, and he eats from it daily. Model is blank with no text so you can leave as is or customize anyway you want. Heavy duty and rounded edges for pet…
Designed in fusion 360. I printed with the standard .04 nozzle. Logo is raised higher than the printables text for color change on single color printers. Must use supports, I used tree supports with no issues. Tried on many standard ball…
Designed myself in fusion 360 using the gridfinity design. Holds ½ inch drive metric 14, 16, 17, 19, 21, and 24mm sockets. Should fit many brands. My Blackhawk and craftsman brand sockets fit but to ensure the fit of your sockets you can…
Designed infusion 360. I am a volunteer firefighter in the United States and designed this keychain for my key ring and firefighters worldwide. Requires no supports. Can be scaled up in slicer if you would like it bigger. For single color…
designed in fusion 360. For best results with supports use tree supports with build plate only option. If you do not have a multicolor system, you can easily paint the buttons and light indicator. Thanks for viewing. Please like, follow,…
Designed in fusion 360, mount with screws. Left and right bracket files are posted. Please like, follow, rate, and upload your makes. Check out my profile for many other models. Thanks for viewing.
Gridfinity holder for Walmart hyper tough mini files. Printed in petg for use in toolbox. personally designed using fusion 360. Letters are raised so a pause can be added for single color printers. Please like and upload your makes.
Designed myself using fusion 360 as a simple round wall saver to protect against the doorknob indenting the drywall. 4.5 mm thick. 82mm diameter or .1775 inches thick, and 3.285 inches base diameter, I recommend rotating model over to…
Designed in fusion 360. Perfect for parties. Hold snacks, etc. Supports are recommended. Scale if wanted. Please like, follow, rate, and upload your makes. Check out my profile for many other models. Thanks for viewing.
Designed in fusion 360. Clips to any ball cap style hat. Supports are required; I use tree supports with no issues. For single color printers add a pause at layers 45 for the letters, 48 for the red button, and 51 for the triangle. Please…
Designed in fusion 360. No supports or multicolor unit is needed. For single color printers add a pause at layer 11 or 12 to change color for raised text and border. Please like, follow, rate, and upload your makes. Check out my profile…
Designed myself in fusion 360 using the gridfinity system to organize my tap handles in my toolbox. These are generic tap handles. I always make the most use and use the least amount of filament possible on every model. I added these…
Designed in fusion 360 using the gridfinity design to organize specialty drills in my machinist toolbox. Simple bins with labels. Left-handed, lettered, numbered, and brass sharpened drills. Letters are raised so a pause can be added to…
Designed myself in fusion 360. QIDI text is raised so a pause can be added at layer 259 for color change if wanted. Supports are required. I printed with the QIDI logo up and used tree suports with no issues. Please like, rate and share…
Designed myself in fusion 360, test printed a few parts that all snaped in good. I snaped into multiple places to ensure I had enough play to fit. It snaps in nice and snaps off easily without much force. A pause can be added for single…
Designed in fusion 360. No supports or multicolor unit needed. For single color printers wanting a separate color for raised text and border add a pause at layer 11 or 12. Print lying flat on build plate with raised text facing up. Please…
Designed in fusion 360 to hold my bigger wrenches so there not just lying in a pile in my toolbox. Was drawn to fit Pittsburg brand wrenches but should fit most standard wrenches in these sizes. Letters are raised. Fits in drawers 2.5…
Designed myself in fusion 360. For printing without QIDI BOX add a pause for color changing the letters. NO QIDI BOX REQUIRED, NO SUPPORTS REQUIRED. Please like, follow, rate, and upload your makes. Check out my profile for other QIDI…
Designed in fusion 360. Scale as needed to fit printer. Supports are recommended. Please like, follow, rate, and upload your makes. Check out my profile for many other models. Thanks for viewing and happy new year.
Designed in fusion360 as a safety wheel distance guide for the work rest and tongue of bench grinders and pedestal grinders. This is designed to meet Osha standards in USA. Hangable which is perfect for pedestal grinders for a quick ready…
Designed in fusion 360 to have a replacement file if needed for my soap dispensers I bought off amazon. Recommend 100% infill for Strength. Recommend to print with the hex up and handle side down. I included a keyhole model and…
Designed myself in fusion 360 using my hat clip design. For single color printers add a pause at layer 45 to change color for letters if wanted. Supports are required, I recommend tree supports as I have had no issues after printing many…
Designed in fusion 360. No ams or supports are required. Suggest setting seam to back. FOR USE WITH BATTERY POWERED TEA LIGHTS ONLY. NEVER USE A FIRE LIGHT CANDLE IN ANY 3D PRINT HOLDER. Please like, follow, rate, and upload your makes.…
Designed in fusion 360. No supports are required. For custom text download the no text model and add text to model in your slicer. Can be scaled in slicer if you would like it to be bigger. Please like, follow, rate and upload your makes.…
Holds craftsman standard flat and Philips screw drivers. thank you for viewing and downloading this organizer. Please like and upload your makes for the community to see. Printed in sunlu black petg on QIDI PLUS 4. Please like and share…
modeled on fusion 360 using the gridfinity design. Should fit most standard ½ shank drills up to 6.4 inches long. Letters are extruded so a pause can be added to change color for the letters. Before printing the 2 larger files, I would…
Designed in fusion 360 using the gridfinity design. Letters are raised so a pause can be added for single color printers. I included a picture of all holes with dimensions if you would like to check fitment. Please like, follow, rate and…
Designed myself in fusion360. No supports are required. For single color printer add a pause in slicer to change colors for letters if wanted. I used QIDI BOX for 3 colors as shown in photos. Prints in less than 10 mins without QIDI BOX.…
Designed in fusion 360. Will print ok with no supports but may improve print quality for the underside of the wings with supports. Model dimensions are in the photos. Can be scaled up or down in slicer if wanted. Please like, follow, rate…
Modeled using the gridfinity design in fusion 360. Should hold any typical ¼ inch hex shaft sockets. Letters are extruded so a pause can be added to color change.
Designed myself in fusion 360 works great in my toolbox. Using Walmart brand hart adjustable wrenches and craftsman ratchets. Had to cut in slicer to print in 2 parts then glued together.
Designed myself in fusion 360. Hooks are both .600 inches thick (15.24 mm). I have used this thickness at 100% infill to hold my bath towels for over 6 months with no issues. I've included files for both sizes that have no mounting holes…
Designed myself in fusion 360. Can be scaled to fit. It is a little loose with 5/8 Jacob chuck keys. please like, rate and post your makes
This holder was designed using the gridfinity design in fusion 360. Letters are extruded so a puase can be added to change color for the letters.
Designed myself in fusion 360 using the gridfinity design. NO AMS, NO SUPPORTS. Letters are raised so a pause can be added for single color printers. Feel free to edit the pockets text. Small pocket is for a round radius tape measure.…
Designed in fusion 360. Handle is 9 inches or 228.6 mm long total. Add text if you want to customize. Please like and upload your makes
Designed in fusion 360 using the gridfinity design to organize my tap handles. 8.5-inch handle diameter is 7/16-inch, 14.5-inch handle is 5/8-inch diameter, and 20-inch handle is 5/8 diameter. Had to notch the 8.5-inch holder to clear the…
Designed myself in fusion 360. Can be scaled to size. The small version is pre dimensioned to the general brand magnet. The standard size is designed for a generic brand magnet. Both models are thin enough at the ends to still magnetize…
Designed in fusion 360 using the gridfinity design. Holds metric ¼ inch drive deep well sockets 9mm, 10mm, and 13mm. I included a photo of all the hole dimensions if you would like to check your sockets for fitment. Letters are raised so…
Designed in fusion 360 for emt's. Thank you for your service. For single color printers add a pause at layer 17 to change color for text. Please like, follow, rate, and upload your makes. Check out my profile for many other models.
Designed in fusion 360 myself. Holds 2 current 2025 Walmart hyper tough brand set cases as shown in photos. Can be scaled to hold 1 or more then 2 cases. NO AMS, NO SUPPORTS are required. Please like, follow, rate and upload your makes.…
Designed this file myself on fusion 360 to mount a holder for my utility knife to my work bench. I was always misplacing it, now it has a designated position. Can mount with 2 screws or double back tape. Max knife dimensions that will fit…
