Counting matching models…
I bought an Arzopa A1 Gamut Slim portable monitor and was not overly impressed with the “kickstand” cover stability. The cover is great but as a stand not so much. So I designed these. You need to print the pair and space them evenly on…
25mm Length extension of the excellent design by paulorfo (https://www.printables.com/model/236847-ski-and-pole-carrier). The original design was long enough to fit my wife's skis but not mine. Thank you to the original designer for…
I thought you might all enjoy this mini security camera prop I created. It's a fun little reminder that in todays society “someone is always watching”. The model was inspired by 3Dfiti (https://www.instagram.com/3dfiti/). I designed this…
Remix to fit FX888 soldering iron. Uses M3 x 5 brass inserts instead of captive M3 nuts. Requires 2 x M3 12 hex head bolts. Printed in PLA as this is not near the hot parts. It clamps around the part you hold with your hand. If you print…
Quick simple print to hold 4x m.2 NVME 2230 and 4x NVME 2280 SSD. If you download the print and make one, please leave a rating a review and a photo. I love seeing others enjoy my designs. Thanks
A small 5” wide 3” deep shelf for monitor. The front edge lip is designed with small bezel monitors in mind. Mine had 4mm space above viewing area so that’s the lip depth. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
I designed this to hold my iPhone 15 Pro. Hopefully by being hidden from sight it should help eliminate it as a source of distraction during focus time. I figured if it’s out of sight, it’s out of mind. It should work for other phones as…
After using my two angle portable monitor stand a few times, I decided to create a companion riser set to go with it. I wanted them to be easy to print, lightweight and stable. This is my solution. I printed these without supports and at…
I didn't like the larger designs for the inidicators and wanted something that did the job but in a discreet way. You'll need a single 8x3mm Neodymium Magnet and some super glue. On the top surface there is a 0.5mm raised piece. I did…
I wanted to store my Mac Keyboard and Trackpad off the work surface when not in use. The underside of the shelf is not used for anything, so I designed these parts to be printed in pairs and stuck on using four 3M Command strips. Two…
Combined a couple of great models that enabled me to mount my ThermPro TP50 on my Skadis setup. This is my first time using the T-Clip system by Line Arc Line and it worked like a charm. I am sure I’ll be using it again. I printed this on…
So if you have a wife like mine (or you are a wife), that buys expensive handbags / purses and likes to go to the movies, this is for you! Imagine, if you will, the disgusting floor where said bag ends up sitting. Yuk. I created this to…
I printed at 0.2mm Layer height using the Prusa speed profile and changed the infill to rectilinear. The body takes about 9hrs and the side is about 2.5hrs each. You need to print two of them. I used m3 brass inserts and m3 12mm hex head…
A simple USB Holder for 5x USB-A and 5x USB-C devices. Does not require supports! If you like this model and print one please post a rating and a picture of your print as I love to see what colors you might choose to print it in. Thanks…
T-Shaped laminate floor space for expansion gap. I printed 30 of these and used two per board length and 1 per edge. You may need more, if you do just print more. My flooring was 8mm thick with 3mm underlayment. I set this up for 11mm so…
I designed a wide tripod plate for my tripod. It’s 75x75mm as I plan to use it for my mini projector. It uses 1 ¼ 20 thread bolt ¾” long. Printed in PETG with 25% infill for strength and flex. The small notch on the inside of the shoe…
I designed a single and a double clip on part for your Skadis Hooks and Tool Holders. They just press on to the hook or tool holders you likely bought when you bought your Skadis. A label can be attached to so that you can see where…
I didn’t want the fenders or rack on the Himiway zebra. The only place to mount the rear/brake light is on the rack. Till now. I used the original nuts and a couple of heavy duty zip ties to position it under my seat. You will need to…
I designed this to store my AirTags when not in use. It takes advantage of the “dead” space underneath a shelf or desk surface. I used 3M Command strip to mount the brackets to the underside of the shelf and it holds well. Please leave a…
This rack holds 10 “Altoids Smalls” tins. It can be mounted with screws, 3M command strips or just laid flat. Provides an easy way to insert and remove tins and is designed to be strong but take minimal filament. NOTE: If the tin doesnt…
I wanted to store my 2nd flexible spring sheet when not in use. The underside of the shelf is not used for anything, so I designed these parts to be printed in pairs and stuck on using four 3M Command strips.. They have a stopper at the…
I wanted to mount my IKEA Tertial Lamp in a better place on my small workbench. I decided to repurpose one of the plugged holes on my Sterilite drawer set. It fits great and the lamp is not using space on the bench. Works perfectly Print…
Adjusted the hip connector to fit better on my printed version. Hip connectors were a little too narrow. I added some width and they fit like a glove. Category: Models
These are all currently available results.
