LayersFactory

All models

Sort order

Counting matching models…

P
PrintablesGeekdad_3D

iPhone 12 pro max case_hex pattern

Just a quick remix to add a hex pattern on the back.

Downloads
1,255
Likes
107
Rating
4.64
Order a print of this model
P
PrintablesGeekdad_3D

Zippo lighter case

Uses 1.75mm filament for a hinge pin. It is better printed with resin as FDM broke too much. I will add a step and fusion 360 file for modifications.

Downloads
782
Likes
114
Rating
4.57
Order a print of this model
P
PrintablesGeekdad_3D

USB-C plug protector

Remixed this to protect the usb-c charging cable for the 2017 Macbooks that charge with usb-c (Thunderbolt 3) UPDATE: Added a new version that is narrower so as to not block the other port next to the one you're charging with. Category:…

Downloads
582
Likes
46
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Stylized Lucky 13 head with snap in rabbit ears 200%

I just modified the head and rabbit ears so they snap in and rotate. Also made a new eye to push/glue in. These are sized for a 200% figure but can be reduced by 50% although the snap feature may be affected. Right now the eye will need…

Downloads
479
Likes
94
Rating
4.5
Order a print of this model
P
PrintablesGeekdad_3D

Zippo Lighter Case

I created a Zippo lighter case for the standard size lighter. It was inspired by https://www.thingiverse.com/thing:4222731 but I started from scratch to make it fit better. It uses a piece of 1.75mm filament (or similar) for a hinge pin.…

Downloads
427
Likes
28
Rating
4.5
Order a print of this model
P
PrintablesGeekdad_3D

Star Wars Airtag Pendant

I made a small pendant with a removable face with a Star Wars theme. Holds an Airtag within. Maybe best on a resin printer.

Downloads
345
Likes
113
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Nerf dart heads

My son wanted plastic tips for his nerf darts so they would go farther so I made these up in Sketchup and printed some out on my Replicator 2 in PLA. UPDATE: Made them a little shorter and with a ridge to hold them in a little better.…

Downloads
279
Likes
42
Rating
4.8
Order a print of this model
P
PrintablesGeekdad_3D

Waterfall Bong Cap

This is a cap to make a waterfall bong out of a 14mm bowl and a Gatorade (or similar) bottle.

Downloads
271
Likes
88
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Vitamin Water/Gatorade Fruit Fly Trap

Just a remix to fit on a Vitamin Water/Gatorade bottle. Print Settings Rafts: Doesn't Matter Supports: No Category: Household

Downloads
218
Likes
25
Rating
4.8
Order a print of this model
P
PrintablesGeekdad_3D

Space Invaders Magnets

Cool retro Space Invaders refrigerator magnets. Instructions Print out one or all of the files and insert a 6.8 x 7 mm cylindrical magnet in the hole on back. Sketchup files are provided so the hole can be altered to fit other magnets.…

Downloads
166
Likes
45
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Apple Watch Charger wall mount

Just a simple wall mount for an Apple Watch charger. The two pieces slip together to trap the charger "puck" and the cable runs down the back. There are two versions one for double stick tape and one for screws. (screw holes are sixed for…

Downloads
150
Likes
11
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Zippo Lighter Case

I created a Zippo lighter case for the standard size lighter. It was inspired by https://www.thingiverse.com/thing:4222731 but I started from scratch to make it fit better. It uses a piece of 1.75mm filament (or similar) for a hinge pin.…

Downloads
149
Likes
8
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Vitamix Blender Tamper

Someone on Facebook asked about a file for a Vitamix tamper. Probably should be coated with a food safe resin. I made it in two parts with a screw connector for ease of printing.

Downloads
140
Likes
6
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

USB-C plug protector

Remixed this to protect the usb-c charging cable for the 2017 Macbooks that charge with usb-c (Thunderbolt 3) UPDATE: Added a new version that is narrower so as to not block the other port next to the one you're charging with. Category:…

Downloads
137
Likes
23
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Sign standoff

Screw on standoff for mounting panels on a wall. Screw base to wall and mount the panel with the top part. Category: Signs & Logos

Downloads
129
Likes
13
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Space Invaders Magnets

Cool retro Space Invaders refrigerator magnets. Print instructions Instructions Print out one or all of the files and insert a 6.8 x 7 mm cylindrical magnet in the hole on back. Sketchup files are provided so the hole can be altered to…

Downloads
114
Likes
22
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Star Wars Display Stand w/braces

I printed one and maybe I didn't use a good enough infill but the arms broke right away. I added some vertical support braces to the arms. Category: Props

Downloads
102
Likes
26
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Filament Guide for IKEA Lack enclosure

I made a filament guide to go through an IKEA Lack table used for an enclosure for my Maker Select V2 printer. Post-Printing Have to drill/cut out a slot in the Lack table and screw it down. Screw holes are made for a #8 flathead screw.…

Downloads
96
Likes
12
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Vitamin Water/Gatorade Fruit Fly Trap

Just a remix to fit on a Vitamin Water/Gatorade bottle. Print Settings Rafts: Doesn't Matter Supports: No Category: Household

Downloads
92
Likes
10
Rating
4
Order a print of this model
P
PrintablesGeekdad_3D

Prusa MK3 Z toppers

LEGO crystals to fit into the top of the Z-axis rails. Fits into the hex holes. Category: 3D Printer Accessories

Downloads
70
Likes
21
Rating
4
Order a print of this model
P
PrintablesGeekdad_3D

Foredom Flex shaft 30 cutoff saw

I reworked this file to incorporate a Foredom flex shaft size 30 handle. I also moved the screw holes out towards the edges and centered the arm hinge for more stability. I have included a step file as well. Update*** Reworked the arm for…

Downloads
69
Likes
10
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Bayonet Container lid

Customized version of http://www.thingiverse.com/thing:56910 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56910 Instructions Using the following options: _part = lid _insideDiameter = 46 _resolution =…

Downloads
64
Likes
6
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

The Expanse Razorback w/stand

Increased the size and split into two pieces for printing on my Prusa MK3. I also designed a base that holds it at this particular size. Assembled stands 280mm tall. It can be reduced but I have no idea if the stand will work at a reduced…

Downloads
62
Likes
14
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Jolt Nerf gun dart holder

This is a clip to hold two darts on the new Nerf Jolt gun. Category: Toy & Game Accessories

Downloads
60
Likes
6
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Apple Airport mount with logo.

Remixed this Airport Express mount with or without holes to mount on a wall with a regular cord. Category: Gadgets

Downloads
59
Likes
6
Rating
4
Order a print of this model
P
PrintablesGeekdad_3D

Soap dispenser sleeves for Mrs. Meyers

These are a couple of sleeves to decorate a liquid soap dispenser. They are designed to fit Mrs. Meyers 12.5 oz bottles.…

Downloads
57
Likes
4
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Bayonet Container base

Customized version of http://www.thingiverse.com/thing:56910 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=56910 Instructions Using the following options: _minimumWallThickness = 1.0 _insideDiameter = 46…

Downloads
57
Likes
7
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

The Expanse Razorback w/stand

Increased the size and split into two pieces for printing on my Prusa MK3. I also designed a base that holds it at this particular size. Assembled stands 280mm tall. It can be reduced but I have no idea if the stand will work at a reduced…

Downloads
56
Likes
9
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Space Invaders Magnets

Cool retro Space Invaders refrigerator magnets. Instructions Print out one or all of the files and insert a 6.8 x 7 mm cylindrical magnet in the hole on back. Sketchup files are provided so the hole can be altered to fit other magnets.…

Downloads
55
Likes
10
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Insignia remote battery door w/lip

Same thing but added a small lip at the end of the clip to facilitate pulling off the cover with a fingernail. Category: Replacement Parts

Downloads
53
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Minion Fidget Spinner with bearing weights

Just removed the hex nut spaces and then added arms for 608 bearings. Print Settings Printer: Maker Select V2 Rafts: No Supports: No Resolution: .2mm Infill: 30 Category: Toys & Games

Downloads
53
Likes
12
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Apple Watch Charger wall mount

Just a simple wall mount for an Apple Watch charger. The two pieces slip together to trap the charger "puck" and the cable runs down the back. There are two versions one for double stick tape and one for screws. (screw holes are sixed for…

Downloads
52
Likes
12
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Whiteboard marker clip

Just a simple clip to put on the side of a 1/4" thick whiteboard to hold a thin marker. Category: Office

Downloads
52
Likes
3
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Yet another fidget cube

Another in a long line of fidget crap and fidget cubes. Designed before I saw all the other fidget cubes out there. Takes one 608 bearing. The center post is designed with a stop halfway for the bearing and hexagonal posts for the…

Downloads
45
Likes
20
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

BradyTiki Idol w/hole

I just took the Idol and added a hole through it for a string necklace. Print instructions Category: Costume

Downloads
42
Likes
7
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Foredom Flex shaft 30 cutoff saw

I reworked this file to incorporate a Foredom flex shaft size 30 handle. I also moved the screw holes out towards the edges and centered the arm hinge for more stability. I have included a step file as well. Update*** Reworked the arm for…

Downloads
41
Likes
5
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Replacement Rock Tumbler Pulley

This is a reproduction of the pulley on a National Geographic rock tumbler. I am including a step file.

Downloads
41
Likes
7
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

BradyTiki Idol w/hole

I just took the Idol and added a hole through it for a string necklace. Category: Costume

Downloads
40
Likes
9
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Soap dispenser sleeves for Mrs. Meyers

These are a couple of sleeves to decorate a liquid soap dispenser. They are designed to fit Mrs. Meyers 12.5 oz bottles.…

Downloads
39
Likes
4
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Prusa MK3 Z toppers

LEGO crystals to fit into the top of the Z-axis rails. Fits into the hex holes. Print instructions Category: 3D Printer Accessories

Downloads
39
Likes
11
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

X-Carve Y-axis cover alternate magnets

Quick remix to use magnets I already had. 6.1mm x 1.5mm specifically. Also removed the overhangs for ease of printing. I've included a STEP file if people want to alter it for their own magnets. Category: Parts

Downloads
37
Likes
16
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

30mmx5 rod

Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: thread_step = 1.5 resolution = 0.5…

Downloads
37
Likes
3
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Walmart Robby The Robot Disintegrator Gun

Made a more screen accurate ray gun for the Robby the Robot toy from Walmart. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Yes Category: Toy & Game Accessories

Downloads
37
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

X-Carve Z-axis spinner

I saw some of the other x-carve z axis spinners and I wanted to make one that spins it more freely so I made a crank type spinner. Needs a short M4 bolt and one or two washers. Bolt should self tap the hole in the knob. EDIT: Now with…

Downloads
36
Likes
11
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Yet another fidget cube

Another in a long line of fidget crap and fidget cubes. Designed before I saw all the other fidget cubes out there. Takes one 608 bearing. The center post is designed with a stop halfway for the bearing and hexagonal posts for the…

Downloads
35
Likes
11
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Soup Can Skadis Holder

Remixed the soup can pegboard holder to fit the Skadis pegboard from IKEA. Also added a brace to keep it from leaning too far backwards. Fits a Progresso soup can. Category: Organization

Downloads
34
Likes
5
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

40 mm Fan Cover Biohazard edition

I remixed the 40mm fan cover with a biohazard symbol in it. Update I added two new files specifically for the Maker Select V2\Wanhao Duplicator fans. One for the front and one for the side with the hole plugs where screws are in place…

Downloads
34
Likes
6
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

40 mm Fan Cover Biohazard edition

I remixed the 40mm fan cover with a biohazard symbol in it. Update I added two new files specifically for the Maker Select V2\Wanhao Duplicator fans. One for the front and one for the side with the hole plugs where screws are in place…

Downloads
33
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Filament Guide for IKEA Lack enclosure

I made a filament guide to go through an IKEA Lack table used for an enclosure for my Maker Select V2 printer. Post-Printing Have to drill/cut out a slot in the Lack table and screw it down. Screw holes are made for a #8 flathead screw.…

Downloads
32
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

IKEA Tertial mic Shock mount for Apogee MiC

I remixed the two part shock mount by @stcredzero and added a mounting block to attach to the arm of an Ikea Tertial lamp. I made a two part mic holder with matching loops to string the hair binders through which eliminated the need for a…

Downloads
32
Likes
9
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Minion Fidget Spinner with bearing weights

Just removed the hex nut spaces and then added arms for 608 bearings. Print Settings Printer: Maker Select V2 Rafts: No Supports: No Resolution: .2mm Infill: 30 Category: Toys & Games

Downloads
31
Likes
7
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Triforce iPhone cases

I just added (or subtracted?) the triforce. Category: Mobile Phone

Downloads
31
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Prusa X axis NEMA spinner Imperial Logo

This is a snap on spinner for the X-axis stepper motor for the Prusa i3 MK2-3. Category: 3D Printer Accessories

Downloads
30
Likes
1
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

BradyTiki Idol w/hole

I just took the Idol and added a hole through it for a string necklace. Category: Costume

Downloads
29
Likes
6
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Soup Can Skadis Holder

Remixed the soup can pegboard holder to fit the Skadis pegboard from IKEA. Also added a brace to keep it from leaning too far backwards. Fits a Progresso soup can. Category: Organization

Downloads
28
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Another Satisfying Twister

Customized version of http://www.thingiverse.com/thing:2239307 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=2239307 Instructions Using the following options: smoothing_radius = 10 sides = 8…

Downloads
28
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Pocket Operator case with buttons

I remixed the Pocket Operator case to add buttons to it and reinforce the case with places for 4 screws to hold it together. It takes 4 - 2.5M x 12mm screws (self tapping). Category: Audio

Downloads
27
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

IKEA Tertial mic Shock mount for Apogee MiC

I remixed the two part shock mount by @stcredzero and added a mounting block to attach to the arm of an Ikea Tertial lamp. I made a two part mic holder with matching loops to string the hair binders through which eliminated the need for a…

Downloads
27
Likes
9
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Prusa MK3 Z toppers

LEGO crystals to fit into the top of the Z-axis rails. Fits into the hex holes. Category: 3D Printer Accessories

Downloads
27
Likes
5
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Jolt Nerf gun dart holder

This is a clip to hold two darts on the new Nerf Jolt gun. Category: Toy & Game Accessories

Downloads
25
Likes
4
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

X-Carve Z-axis spinner

I saw some of the other x-carve z axis spinners and I wanted to make one that spins it more freely so I made a crank type spinner. Needs a short M4 bolt and one or two washers. Bolt should self tap the hole in the knob. EDIT: Now with…

Downloads
24
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

NerfSwatter

This is a remix of my own nerf dart head and beefy smoosher http://www.thingiverse.com/thing:128277 by HobgoblinSteve. It can be mounted on a nerf dart to turn a nerf gun into a fly splatting gun. Category: Household Supplies

Downloads
24
Likes
5
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Yet another fidget cube

Another in a long line of fidget crap and fidget cubes. Designed before I saw all the other fidget cubes out there. Takes one 608 bearing. The center post is designed with a stop halfway for the bearing and hexagonal posts for the…

Downloads
23
Likes
9
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

FLSUN Kossel LCD-Case

Just had to make the hole for the pot knob bigger to fit the knob on my flsun Kossel xl. Also made the "speaker" holes bigger and more of them. Category: 3D Printer Parts

Downloads
23
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

My Customized Preassembled Secret Heart Box

Customized version of http://www.thingiverse.com/thing:44579 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44579 Instructions Using the following options: tol = 0.4 word2 = PEACE word1 = LOVE quality = 1…

Downloads
22
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

2x3 Brick pendent

Customized version of http://www.thingiverse.com/thing:379563 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=379563 Instructions Using the following options: Connector = Circle Width = 2 height = 9.6…

Downloads
22
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Wyze Cam Lack table mount

Just a quick remix so a Wyze cam can be mounted to the leg of a Lack table (enclosure). See the original instructions for attaching the cam to the mount. I am also including the Fusion 360 file if you need to adjust the screw holes or…

Downloads
21
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

My Customized Preassembled Secret Heart Box

Customized version of http://www.thingiverse.com/thing:44579 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=44579 Instructions Using the following options: tol = 0.4 word2 = PEACE word1 = LOVE quality =…

Downloads
21
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Walmart Robby The Robot Disintegrator Gun

Made a more screen accurate ray gun for the Robby the Robot toy from Walmart. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Yes Category: Toy & Game Accessories

Downloads
20
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

iMac HD mount Seagate Expansion

I made the opening narrower and raised the back to better keep the drive from falling backwards. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 25% Notes:…

Downloads
20
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

NerfSwatter

This is a remix of my own nerf dart head and beefy smoosher http://www.thingiverse.com/thing:128277 by HobgoblinSteve. It can be mounted on a nerf dart to turn a nerf gun into a fly splatting gun. Category: Household Supplies

Downloads
20
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

X-Carve Y-axis cover alternate magnets

Quick remix to use magnets I already had. 6.1mm x 1.5mm specifically. Also removed the overhangs for ease of printing. I've included a STEP file if people want to alter it for their own magnets. Category: Parts

Downloads
20
Likes
5
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Other designs for Clip on fan cover

Just took almost2blank's design and made a couple of alternate designs for the center. Category: 3D Printer Parts

Downloads
20
Likes
2
Rating
5
Order a print of this model
P
PrintablesGeekdad_3D

Insignia remote battery door w/lip

Same thing but added a small lip at the end of the clip to facilitate pulling off the cover with a fingernail. Category: Replacement Parts

Downloads
19
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Apple Airport mount with logo.

Remixed this Airport Express mount with or without holes to mount on a wall with a regular cord. Category: Gadgets

Downloads
19
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Soap dispenser sleeves for Mrs. Meyers

These are a couple of sleeves to decorate a liquid soap dispenser. They are designed to fit Mrs. Meyers 12.5 oz bottles.…

Downloads
18
Likes
3
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

74x50mm Spool Holder for Replicator 2

Customized version of http://www.thingiverse.com/thing:44906 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=44906 Instructions Using the following options: spool_hole_diameter = 50 spool_width = 74 unit =…

Downloads
17
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

My Customized Funnel

Customized version of http://www.thingiverse.com/thing:49597 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=49597 Instructions Using the following options: Funnel_Height = 55 Small_End_Diameter = 36…

Downloads
16
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

iMac HD mount Seagate Expansion

I made the opening narrower and raised the back to better keep the drive from falling backwards. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 25% Notes:…

Downloads
16
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Clothespin gun

I just took out some of the unnecessary curves. Update1: Enclosed the hole at the bottom to keep the spring in place. (untested) Category: Toys & Games

Downloads
16
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

FLSUN Kossel LCD-Case

Just had to make the hole for the pot knob bigger to fit the knob on my flsun Kossel xl. Also made the "speaker" holes bigger and more of them. Category: 3D Printer Parts

Downloads
14
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

My Fidget Twister

Customized version of http://www.thingiverse.com/thing:2239307 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=2239307 Instructions Using the following options: twist = 167 radius = 32 bottom_height = 1…

Downloads
14
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

My Fidget Twister

Customized version of http://www.thingiverse.com/thing:2239307 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2239307 Instructions Using the following options: twist = 167 radius = 32 bottom_height = 1…

Downloads
13
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

2x3 Brick pendent

Customized version of http://www.thingiverse.com/thing:379563 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=379563 Instructions Using the following options: Connector = Circle Width = 2 height = 9.6…

Downloads
13
Likes
5
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Clothespin gun

I just took out some of the unnecessary curves. Update1: Enclosed the hole at the bottom to keep the spring in place. (untested) Category: Toys & Games

Downloads
13
Likes
3
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Another Satisfying Twister

Customized version of http://www.thingiverse.com/thing:2239307 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2239307 Instructions Using the following options: smoothing_radius = 10 sides = 8…

Downloads
12
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Replicator 2/2X plexiglass clip

Clip to hold 2mm plexiglass to sides of Replicator 2/2X openings. Category: 3D Printer Accessories

Downloads
12
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Y-axis Cable Chain clip for base plate upgrade

I upgraded my baseplate to the Rep Rap Champion base plate so I remixed the chain clip to latch on to the new baseplate. Photos to come once I have the chain printed and attached. I also remixed the end plate that attaches with two screws…

Downloads
12
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Maker Select V2.1 fan mount for Dial Indicator

Made a copy of the Dial Indicator clamp to fit my Maker Select V2.1 but offsetting the dial indicator to line up with the extruder. M3 nuts and M3 bolts longer than the original fan bolts necessary. Category: 3D Printer Accessories

Downloads
12
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

LP-E12 cover split

I redesigned Snafky's cover a bit which seemed too tight and split the side to make it flex on a bit. That's all. UPDATE: Added another version (w/logo) that better fits the Canon branded batteries as the first one better fits the…

Downloads
10
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Y-axis Cable Chain clip for base plate upgrade

I upgraded my baseplate to the Rep Rap Champion base plate so I remixed the chain clip to latch on to the new baseplate. Photos to come once I have the chain printed and attached. I also remixed the end plate that attaches with two screws…

Downloads
10
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Teal Top Shark Fin

Simple add of a shark fin so... SkyShark? Teal-shark? Category: R/C Vehicles

Downloads
10
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Teal Top Shark Fin

Simple add of a shark fin so... SkyShark? Teal-shark? Category: R/C Vehicles

Downloads
10
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Dial Gauge Holder for replicator 2/2X

I rebuilt the dial gauge holder and moved the vertical piece over so the dial gauge faces the front of the printer once installed. Prints like a charm! Made to fit a cheap dial gauge from Harbor Freight. Category: 3D Printer Accessories

Downloads
10
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

LED strip mount for Wanhao I3 and clones

This is a two piece mount to attach an adhesive backed LED strip to the top bar of a Maker Select V2 or Wanhao I3. I used a USB version but there are 12v versions that could be spliced into the heat block cooling fan. Print Settings…

Downloads
9
Likes
2
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Dial Gauge Holder for replicator 2/2X

I rebuilt the dial gauge holder and moved the vertical piece over so the dial gauge faces the front of the printer once installed. Prints like a charm! Made to fit a cheap dial gauge from Harbor Freight. Category: 3D Printer Accessories

Downloads
9
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

My Customized Christmas Tree with Branches- Customizer version

Customized version of http://www.thingiverse.com/thing:194112 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=194112 Instructions Using the following options: number = 7 wall = 1 branches = 7 direction =…

Downloads
9
Likes
1
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

LP-E12 cover split

I redesigned Snafky's cover a bit which seemed too tight and split the side to make it flex on a bit. That's all. UPDATE: Added another version (w/logo) that better fits the Canon branded batteries as the first one better fits the…

Downloads
9
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

X-Carve removable hose bracket for 2.5" ID (Rockler) vacuum hose

I just made the curved part on top wider to take a 2.5" hose with an outside diameter of 2.85". Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: Yes Resolution: .3 Infill: 20% Notes:…

Downloads
9
Likes
0
Rating
0
Order a print of this model
P
PrintablesGeekdad_3D

Logitech C270 front mount for Maker Select V2

Created a mount for the front of a Maker Select V2 or other Wanhao clones to mount the Logitech C270 camera using luc_e's apparatus'. Mounts using the belt mounting screws and M3x8 screws with hex cap heads (not countersunk). Print…

Downloads
9
Likes
0
Rating
0
Order a print of this model