Counting matching models…
This front cover is designed to work with my cage for the DXC exdruder on the Ender-5max printer, but it will work with the stock cage. Look for Cage STL on my profile. Use: "E5M tool cover V8 jets print project.3mf" for print settings.…
print it upside down, for the most important surface of the hot end interface, the horizontal top surface. PPA-cf material was my choice for best stiffness and heat resistance. You will need to modify your front and back covers. You will…
The Best position for GPU cooling, 5080 FE is all all-throughflow design, so most space behind the card is desirable. The front and rear brackets makes a solid connection to the case. You need to install the bracket on the GPU first, then…
A one-piece bumper/carrying case for the Fractal Design Terra SFX case printed in one piece 350x350x350 build plate is required. 4 wall loops and 25% infill are recommended for strength.
This clip fixes the recurring false “tangle” error on the Orbiter Smart Sensor [OSS} Simple fix: install the clip upside down, and the false tangle error is gone. The clip only supports about one-third of the sensor, so the tangle…
4+ wall loops are recommended for water-tight print. You will need to supply compression fitting/ 1/2" NPT Cable Glands to install the PH probe in it.
This will let you mount your T1 pc case under the desk, saving space and improving cooling.
The 90-degree elbow reducer is used for hot air heating from 3.5" to 2.5". PA-cf recommended for temperature resistance
This exoskeleton and Lexan panels enclosure are specifically designed for the Rat Rig Vcore 4.1 500. To improve its structural rigidity. Without this exoskeleton, the large format of the 500 vcore relative to its extrusion size can result…
The enclosure is designed as a two-piece, support-free print, requiring only a couple of M3 heat-set inserts for assembly. It reuses the original Rat Rig box’s end panel and corner pieces, minimizing the number of new parts needed. The…
Simple, easy-to-print, pan-and-tilt adjustable mount for Arducam B0205 1080P Day & Night. You will need an M5 bolt and nut for the pivot, M2 bolts and heat-set inserts or nuts for the camera, M6 bolt and T-nut if you're mounting to the…
These are all currently available results.
