Counting matching models…
designed for T47 bottom bracket, maybe also useable for BSA 30 about 48/50.5mm diameter with 12 nuts PLA works better than ABS. did used it for disasemble a bottom bracket after some ride. Just for the one which dosen't quite tight…
tested for 2024 Gen 9 giant tcr isp intergrated seatpost fuzzy skin might help for harder grip. you'll need M5 screw which longer than 16mm
Once you squeeze the lever withou the disc, the both cylinder of the hydraulic brake caliper will be closed. You'll need 2 of this tool. steps: 1. slightly loost the screw of the hand shifter's oil tank 2. insert 2 of this tools from both…
you'll need: 6 pics 6mm x 3mm magnet super glue how to use: print all parts (except those words) as you want. you don't need support! print those words with the color you want use super glue to join those words and the spin disk together…
mega easy to print. no need supports PLA works. but better high temperature resist filament
You can mount you Rockbros R3-1000 on your gopro mount under your bike computer! Notice: The fitting could be variated according to your printer. Pls print it with fastest speed, try the fitting, adjust it and then print it with high…
the EBB36 can bus module can be mounted on the orbiter's motor easily, but it is not mounted horizontally. This mod is suitable for: Big Tree Tech EBB36 V2 5mm wiring tube (outside diameter about 12mm) for orbiter v2 (maybe also for v1??)…
better use ABS ASA, PLA might too hard for bending
maybe not useable for most of the common plastic filament. pls lemme know if your filament works for this model tighten your brake hose for the hand shifter more securely but be sure that using smaller torque setting . the distance to the…
saw similar model in homepage, want to share you guys with my old design. no screw needed. but just for 35mm thick table. better use abs or asa. pla might too hard to bend
the thin edge should be placed on heatbed, sothat the round hole will facing the sides. if it wont fit, try to use the slicer to expand or shrink. it is caused by the printer. infill wont matter that much. but layerheight might effect the…
Pandemic is passed away. Hopefully no one need this while skiing. There are 3 dimensions for different strip sizes.
These are all currently available results.
