Counting matching models…
no supports needed, print it standing up or orizontal, you will need an M3 drill bit to drill 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm protection grille if you print the one with brass inserts…
I tried to adapt the original born for the VZ-Bot 235 to the VZ-Bot 330 for those who have the stepper pin facing inward I added an Airbox with the lower left part recessed so as to adapt it directly without having to turn the engine, if…
Single support for Mellow's TMC 5160 HV to be hooked to the DIN rail I made them for my VZ-Bot 330 that I have under construction. I printed them with PetG You will need for each support: - 8 M3 x 4.6 brass inserts; -4 M3 x 10mm screws;…
These are the VZ-Bot frame reinforcements made up of a 10 cm long 2020 profile and two parts molded in ABS. for those who struggle to make very large abs prints or for those who simply don't have a print bed that's not big enough. the…
This is a remix of the Mean Well UHP-350-24 power supply stand. I made some changes to the original project by increasing the thickness of some walls and lengthening the two closures, I also put the predisposition for the brass inserts to…
CPAP Fan Mount noise attenation.
the spacers must be cut to fit the orbiter stepper motor; it is designed to put the M3 4.6mm diameter brass inserts: I left a hole to display the led of my USB Type C; the possibility of fixing it with three screws to the EVA 3 support…
Questo è un supporto per la scheda Octopus di BTT per guida DIN con possibilità di installare una vento da 120 mm con griglia personalizzata. M3 brass inserts and screws will be required for the fan M4 nuts and screws if you put a fan…
A filament sensor for Orbiter 1.5 already existed but I didn't want to wait for shipments, so I set to work with a few components I had available: a limit switch; a 6mm diameter bulk bearing; two M2x10mm screws; a couple of cables for…
Support for Din Guide, for the C-Pap card with a printable protection grid in two colors with the VZ logo; it is necessary: - 4 brass inserts M2,5; - 4 M2.5 x 20mm cylindrical head screws; - a thin circular file; - some quick glue; I used…
no supports needed, print it standing up (see images) you will need an M3 drill bit to drill the membranes 2 M3 screws are required to fix the holder 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm…
no supports needed, print it standing up or orizontal you will need an M3 drill bit to drill the membranes 2 M3 screws are required to fix the holder 4 M3 16mm screws to fix the fan with the protection grille if you don't use the 14mmm…
This is a spool holder for RatRig V-Minion to place the lateral and not the front reel. With this Spool holder you can put the bobbin of your filament sideways I designed this spool holder because I used the aluminum profile of the…
Attention: I do not consider myself responsible for the modifications performed on the touchscreen, it is a delicate component, the manufacturers can change the manufacturing layout and the layout of the tracks and the arrangement of the…
This is a cover for 12864 RepRapDiscount LCD display with articulated support and fixing on profile 3060. - 4 M3 screws are needed to close the cover; - 8 brass inserts 4.6x4 M3; - 2 M4 screws with relative self-locking nuts; - 4 M5…
I adapted the support to be prearranged with " Join PTFE Tubes Together Magnetically! " found it here. https://www.printables.com/it/model/32368-join-ptfe-tubes-together-magnetically I remind you that you need magnets to hook the support,…
the saucer can accommodate a pot of 30 cm in diameter. I printed it in red PLA to match the poinsettia, you do as you like, the important thing is that it brings good wishes. MERRY CHRISTMAS......
Support for 4 voltmeters with this holder you can put 4 voltmeters on a DIN rail You need: -4 M3x14mm or 12mm screws -4 M3 x 4.6 brass inserts, the voltmeters can be fixed with M2 x 5mm screws I used these voltmeters:…
They are templates to mark the holes on the plexigal panels inspired by the VZBot panels but if desired they can be used for other printers. they are made of: a corner marker with double screw a corner marker to a screw a marker for…
four M3 4.6x4 brass inserts are required 6 M4 V-screws and related T-nuts to fix the support to the V-Minion.
These are all currently available results.
