Counting matching models…
This is the second version of this. I've made some improvements over the last box that I put up. This one includes a lid and has been re-sized to fit my G-Shock. The hinge pins are printed and then epoxied in place. I suppose you could…
I've been hanging my guitars on these bad boys for more than a year with no problem. I found one similar to this on Thingiverse, but after my Strat fell because that one broke (broke two of them to be exact), I decided to modify it to…
This is a magnetic pistol holder. Can be mounted to the dash of a vehicle, the side wall of your gun safe, under a desk, under a night stand, inside a center console, etc. The possibilities are endless I needed a place to put my pistol…
Here's a dodge ram grill emblem. I've included files to print it in two pieces or one piece. I printed the base in black and the logo in red to match my truck. There's a slight curve, so supports are required touching the build plate. I…
I ran out of room in my watch box so rather than buying one, I made one. This box fits 6 watches. Print the box and 6 of the inserts solid. No supports are required. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts:…
Let me tell you, folks, this print in place box is absolutely tremendous, I mean, it's the best, no doubt about it. You throw your guitar picks in there, and it organizes them like you wouldn't believe. Whether it's in your gig bag, and…
I added a third channel for an extra hair tie to keep cards from coming out of the wrong side on accident. One note about this…there are two versions. One version if you want to pull cards out using the cutout, and another version if you…
Blank version of my grill emblem for a 2nd generation Dodge Ram. My Ram is a 99 and it fits pretty good. Category: Automotive
Remixed the original to turn it into a really comfortable IWB holster. There are two variants. One carries a little deeper in your waistband than the other. Update: After EDC'ing this for a couple of weeks, I added a mag release cover to…
M-Lok Flashlight holder. This is designed for the $13 flashlight (588 Lumen) that they sell at Harbor Freight. https://www.harborfreight.com/588-lumen-tactical-flashlight-63934.html You'll need to get M-Lok screws (Amazon has them) and…
Made this Ipad stand with speaker holes to make it easier to hear. The speaker holes actually serve as a sort of passive amplifier. When you put the Ipad in the dock while it's playing audio, there is a noticeable increase in the amount…
I was surprised to see that nobody had put one of these up here yet. I got several of these Duke Cannon "Big Ass Bricks of Soap" for Christmas last year, and they really need a soap dish to match. See the modeling process here:…
Inside the waistband Holster for Ruger SR40c. You're gonna like it...I promise. Category: Sport & Outdoors
Front hand grip for AR-15 with Keymod mounting system. You'll need Keymod screws to attach it. Here's a video where I attach this print to my rifle. If you don't want to hear me babble on about other stuff, start at 8:52.…
Here are some simple knobs for an electric guitar. I printed them solid and used supports. Category: Music
My wife bought my daughter this cheapy mirror from Wal-Mart, so I designed these quick clips to mount it to the wall. If you print them face down, the don't need support. I chose to print them face up so that the exposed face looks…
I like the original, but the cross member on the bottom side kept breaking off when I tried to remove the supports. I offer this version where that has been removed. Print it on its side with supports. I used lines for supports to make it…
Dodge Charger Pop Socket Cover. Base needs support touching the build plate. Category: Accessories
I've been using these models for years now and am finally getting around to uploading. Regular and selfie versions available. The only difference is on which side the mount is located. Fits with the adapter attached. Also has an opening…
There are three sizes for varying degrees of weight. Wall hook 1 = 1 command strip Wall hook 2 = 2 command strips Wall hook 3 = 3 command strips
I recommend to print it solid and switch colors once it starts to print the letters. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Music
Update: I beefed these up considerably and added a lip that sits above the light to keep it from bouncing around when you pull the cord. I totally eyeballed the gap, but it should work…if not I'll fix it later. This is a mounting system…
Custom handguards for AR 15 with keymod mounting system. Will need supports. You'll need keymod screws to attach it. https://youtu.be/64Xc5Ai6wJ8 UPDATE Added a bottom handguard with a hand stop on it. https://youtu.be/Zsz355lkg-g…
Thigh holster for your Ruger SR40c. You'll need to purchase some 1" strap and either print or buy some buckles. You'll need supports. Print it with the spine down and you should have pretty decent success.
Oh yeah, listen up, brother! When you strut into that firing range, you better be a true macho man, you understand? Oh yeah! Feast your eyes on this 3D printed shell casing deflector – it's not just a piece of gear, it's a declaration of…
This headphones hanger mounts up to steelcase slatwall.
I found a cool statue at the thrift store, but it was missing the base, so I designed this to replace it. Pretty simple, no supports are required. I printed it at about 90% size (it's large) and 10% infill. It works pretty good. I printed…
The kitchen sink stoppers are constantly all over the place when not in use. This gives them a home and keeps them from getting unnecessarily dirty or lost. There is a hole in the back if you want to use a screw, but I just used double…
I named my truck Max, so I thought it would be fitting to have a grill emblem that states that. Printed the base at %30 infill, and the logos solid. I've included a one piece STL in case you want to print it all one color. The base needs…
Whenever I see Kluson style tuners on a Gibson guitar, it makes me wish that they were glow in the dark. I made this model so that I can print a set of tuner knobs in glow in the dark PLA. These fit my Kluson locking tuners, so I'm not…
Here's a tray for loading up your pipe and then putting the rest back into the tin or jar easily. Just pour some tobacco onto the tray, load your pipe, and dump what's left back into the tin or jar. I've been using this for a long time…
Pop socket cover with a pit bull on it. Print the base solid with supports touching the build plate. Print the top piece solid and then glue it into the base. Category: Accessories
Peas in a Pod. Four of them to be exact. Print the base with supports touching the build plate and the pea pod without. There's a full size Pea Pod, and there's also one that's been scaled down in the Z axis, so that it's not so thick.…
This is a little mount made for 1/2" electrical conduit. Curtain rods are very expensive, but conduit is cheap and much more structurally sound, so I created this to mount some curtains at the entrance of a storage area in my house. I've…
This is an update to my previous hard drive enclosures, but it standardizes both sizes and includes a box that you can put them in to keep stuff organized. Print the tops of the enclosures flat, with the tabs horizontal. This will require…
Designed for Shure wireless mics. Model is split into two pieces which key together nice and snug, but not too snug.
I've been carrying my older version of 3D printed wallet for quite some time now, printing new ones as I got tired of the colors or wore out. Every time I'd print though, the supports would be a pain in the neck to get out. the arms would…
Line 6 G30 Transmitter Pouch
Made this for my neighbor and it turned out pretty decent. Prints in two pieces. Print the ring, then print the interior and glue it together. The reason it is two pieces is so that you can change colors for the text and mountain graphic.…
I like the concept of the original maker wallet, but it's not thick enough and it has some overlapping surfaces which prevent it from closing all the way. I like the thicker maker wallet but it retains the overlapping issues. I present to…
Base needs supports. Print solid. I like to print these on a raft. Category: Accessories
Made this for my daughter's friend. Print the base with supports touching the build plate. The top doesn't require supports. I just use super glue to glue the pieces in the base once it's done. Category: Accessories
This mounts an action camera and has a cell phone holder. I use this with my DJI Osmo Action and my DJI Osmo Pocket, but it is a normal gopro style mount, so pretty much any action cam will mount up to it. There is a hole in the bottom…
Somewhere along the line I lost the volume knob to my amp, so I made a new one. I paused the print once it got past the knurled part and switched colors. Looks pretty cool. Also printed it in black to match the rest of the knobs. The sky…
I got a cheapy set of gopro accessories and after a while, the handlebar mount broke. I made this one to be more beefy. Print on its side and print solid. requires supports. There are others here, but I like the satisfaction of fully…
Made this for a friend at work, but now I'm thinking I need one too...LOL I printed it all as one and did a color change for the text and outline. supports are required for the opening where the switch thingy goes. The back piece is a…
I made this for my brother's car. He lost his Ford emblem on his way to my house, so we custom designed a replacement. the base of the emblem needs supports but the letters do not if they are printed face-down. Category: Replacement Parts
Print the two pieces and glue the top to the bottom with model glue or super glue. There's also a complete stl attached if you wanted to print it all one color. Supports are required touching the build plate for the base. Category:…
Base needs supports. Print solid. I like to print these on a raft. Category: Accessories
This fits onto the end of the Honor 7x. I have it sized to fit with the case that came with the phone. It works really well and it prints without supports. Put to the test in this video: https://youtu.be/PWiRoJGQotM Category: Mobile Phone
Print the base with supports and solid. I like to print it on a raft. Category: Accessories
Replacement panel for the front wheel well of a square body GM pickup. Both driver and passenger side are included. Made this in conjunction with my neighbor (it's for his truck), septantrionalis. He also posted it on his profile too.…
Mirror clip for old dressers. I haven't printed it yet, but I don't think supports will be needed. I think that I'm going to print it solid, too Category: Replacement Parts
Remixed the original to fit my Samsung Note 10+ Category: Camera
Supreme Pop Socket Cover. Print the pop socket base with supports touching the build plate. Use super glue or model glue to glue all the pieces together. Category: Accessories
I modeled this to replace the broken seat belt retainer clip in the back seat of my 1969 Dodge Charger, so I know for sure that it will fit that year, but I suspect it will also fit other B-body Mopars of that era. Supports will be…
Here's a pop socket cover of the Colorado state flag. As per usual, print it solid, with supports. Set the supports at 60% and grid. Set the distance from the top and bottom of the supports to the print to .15 mm. Glue all the pieces…
No supports are required. Print the lid with the top side down. Print the Shells with the closed side down. There is a tie down that you can put a pipe cleaner through to tie the pipe into the box; no support is needed here. Put the lid…
The overhead console in my 1999 Dodge Ram fell off of the headliner due to the forward clips being broken. These clips were designed to replace the forward plastic clips for the overhead console to hold it in place. To use these clips,…
Made this for one of my daughter's friends. Needs supports touching build plate. Category: Accessories
This is a phone stand similar to some others I've made for an LG Stylo3 in a case. The charger cord that I used to model this can be purchased here: https://www.amazon.com/gp/product/B01M0LK2SK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1…
Pop socket cover I made for one of my daughter's friends. Apparently this is the logo for Taylor Swift's latest album. Supports everywhere @ 60% works best .15 between top of print and supports .1 between top of supports and print 100%…
Made this to support law enforcement. Print with supports touching the build plate. Print the base black and the stripe blue, then glue it together with super glue. Category: Accessories
Charging stand for the Huawei Honor 6X. You may have to modify the charging cord opening based on your cord. This cord that this is modeld for can be purchased here:…
This is a base that has a 5.75mm hole in the bottom that you can use to mount it to a tripod. I made the hole large enough that you can thread in the tripod screw, but small enough to hold it securely. So far it's working pretty good. I…
Simple 45 degree stand for Chauvet TRI-6 Lights. The stand built into the light won't do 45 degrees so that is where this beauty comes in handy. The included bolt is M12x1.75, and it's been scaled down just a little bit in the x and y…
This stand is for charging an Honor 7x without a case. I got to the point where I really don't like cases because of how big they make the phone feel in my pocket. Category: Mobile Phone
My Honor 7X came with a clear plastic case which is what I designed this stand for. It also is designed for the charging cord that came with my watch. Aftermarket watch charger cords likely won't fit. This will need supports in order to…
This is a blank center console insert for a 2nd gen ford expedition. There is a blank frame only and a filled in version. I didn't print this one because this is my starter for other custom creations. The photos are of a custom version of…
Charging stand for the Huawei Honor 6X and an Asus Zenwatch2. This is designed for the cord that came with my watch. You may have to modify the charging cord opening based on your cord(s). The phone cord that this is modeld for can be…
Needed a piece that I could attach to a telescoping pole to hoist curtain rods up onto hooks that are way out of reach. Category: Decor
I always knock the selector on my strat when I'm strumming enthusiastically. This thing keeps that from happening.
These are all currently available results.
