Counting matching models…
Frame is designed for CNC cutting from 1.5 mm carbon fiber. Stack holes are 2 mm in diameter for flat-head screws. The protection I tried was made from PCTG; it holds for some time, but other plastics like nylon are probably needed.
Printed with all layers set to concentric and ironing enabled. Simple utility part. May be useful as a base
This is a damping mount for the O4 Pro camera. It’s meant to help with Gyroflow, especially when stabilization makes things look worse instead of better. You’ll need a few small foam dampers: just cut cylinders from firm foam (the kind…
Remixed version Print it in hard TPU. I also recommend using an antenna with a longer cable, especially if you plan to rotate it. Adapter for the Radiomaster antenna Recently, I tried this antenna from Radiomaster: It provides slightly…
The main source of smooth rotation is the use of springs and nylon washers in the center parts. The springs also allow the cube to be split apart if you cannot solve it normally. Simply remove any corner piece to disassemble it. To…
I found this design elsewhere, but the original 3D model quality was poor. I rebuilt it from scratch and increased the depth. STL and STEP versions without magnet holes are included, so the model can be easily modified for the magnet type…
Inspired by the Baby Tooth 1S, adjusted for the HDZero AIO5. Use the DXF file for CNC cutting from 2mm carbon. Mounting dimensions are slightly larger (26x26mm) than the standard (25.5x25.5mm) to make FC mounting less tight—also because…
With this case, you can use the full video mode of the camera. It slightly increases the resolution and adds a bit of a fisheye effect. You will probably need to adjust the lens holder size depending on the plastic you use, so I’ve also…
For printing in TPU. Otherwise, the cap will not fit on the connector.
These are all currently available results.
