Counting matching models…
07/17/2023: 0.6mm Nozzle First Layer Tips! Read below on how to get rid of those gaps/crevices in your first layer when using 0.6mm nozzles. The following was performed on the 0.2mm Layer Height Profile. Manually increase your z-probe…
I want to start by giving respect where respect is due for the original model creators for giving me the inspiration to tinker and a place to start! Thanks kerngebiet and mnemic! I designed a drill holder that uses a lot less material…
Degreeless_Engineering 6x9 speaker can! Fits most 6x9 speakers! Since these will most likely end up in the heat, fiber filled filament is strongly recommended. I used Eryone CF-PETG . You will also need to supply M5 and M6 heat set…
Update: I increased the diameter of the cup holder by 1/8", increased the size of the phone holder to holder larger phones, and added a pocket to store the sand spike! Enjoy! Entry for the beach contest. A cup/phone holder with removable…
Two Storage Trays with Figurine Expansion Cups Large Tray: Designed to hold up to 56 cassettes. It also supports customization—figurine expansion cups can be printed separately and glued to the sides for added functionality. Smaller Tray:…
WARNING: I don't condone you put anything in your ears that isn't an approved medical device! Use at your own risk! Using improperly could result in eardrum damage! However, my dad used to stick keys in his ears, so this can't be much…
Please take the time to watch my YouTube video that I created for this template! Your continued support is what makes this all worthwhile! So please Like, Subscribe, and Comment on the Video! Keep the dream alive!!! VIDEO LINK: Link to…
Required: PTFE Tubing Length of Your Choosing(4mm OD x 3mm ID) 8-32 x 0.5in OR M4 x 12mm Screw (model available for both) 1in Wide, Heavy Duty Double Sided Tape 0.15mm Layer height (recommended to maintain printed threads) I was looking…
I designed these grates for my 1st gen 4runner that had cracking/broken grating on the rear compartment doors. So I decided to create a YouTube video on the initial idea, the process of design, and making the parts. Would love any and all…
My entry for the spiral vase mode print competition. Halloween themed circular sawblade that tapers down to a circular base. 4in diameter opening, 2.5in diameter base, 6in tall overall. Prints in around 3-4 hours with 0.6mm nozzle at…
Required: PTFE Tubing Length of Your Choosing (4mm OD x 3mm ID) (2) M4 x 12mm Screws 1in Wide, Heavy Duty Double Sided Tape 0.15mm Layer height (recommended to maintain printed threads) This PTFE tubing holder utilizes integrated clamps…
My doorbell is mounted to my siding (8-10deg angle). I wanted my doorbell camera to look down at my porch more to keep any eye on packages and reduce the overall blind spot. I decided to make this extreme 20deg angle mount because a 10deg…
Snap-On 3/8 Torx Bit holder, T8-T55! Spots for two 3/8" Magnets at the bottom to keep it in place! May work for other brands, check dimensions in slicer! Thanks! Watch My Video To Learn How To Make Your Own! Link To Magnets I Used
AW11 Driver Side Window Switch Replacement Nub (“Auto-Down” Feature) This part is a replacement nub for the driver-side window switch found in the Toyota MR2 AW11 models equipped with the “Auto-Down” feature. If you’ve found this file,…
The original trim uses PVC coatings and rubber seals with integrated knife edges that help close the gaps between the trim, glass, and body. When these original materials deteriorate or are removed, the sealing edge is lost. This STL…
Duratech Stubby Rachet Holders for both the 1/4" and 3/8" sizes! Has spots for 3/8" Magnets! Watch my video if you like the holders and you'd like to learn how to design your own! Links below! Rachet Holder Video Link Link To Magnets I…
I made this to resolve the issue of stripped out holes on my AW11 MR2 headlight bucket fastener holes. These utilize and require M4x6mm brass heat-set inserts to make a custom fastener that easy to install and lasts. Simply print the…
These are all currently available results.
