P
Printablesjuha_j
Decking Spacer 1/8" / 3,2mm
Quick design decking spacer, 3,2mm /1/8" Category: Outdoor & Garden
- Downloads
- 89
- Likes
- 5
- Rating
- 5
All models
Counting matching models…
P
Printablesjuha_j
Paw Patroller ramp
Santa's helpers did mistake and ramp was missing.. So, dad took CAD and he's printer and saved situation. Took Paw Patrol badge of other thing, but could not link it as remix.. Big thanks to him anyway. Print Settings Printer: Anycubic i3…
- Downloads
- 79
- Likes
- 1
- Rating
- 5
P
Printablesjuha_j
VAG oil filter drain bucket
This is Remix of "Tool for VW Common Rail Diesel Engines Oil Filter Drain Reservoir (13 mm). Added 20mm length, 10mm hexagon hole on bottom and supports for center post.
- Downloads
- 59
- Likes
- 11
- Rating
- 0
P
Printablesjuha_j
SC10UU / LM10UU bearing block
This is replacement to aluminum bearing block. I used these on heated bed movement, with printed blocks you can reduce 160 grams of moving mass. Bolt grid matches on Reprap Trespa carriage plate sod here:…
- Downloads
- 41
- Likes
- 3
- Rating
- 0
P
Printablesjuha_j
12mm piezo buzzer mount
Mount for 12mm diam. piezo buzzer. Print Settings Printer: CTC 3D Rafts: No **Supports:** No Resolution: 0,15 **Infill:** 50 Category: R/C Vehicles
- Downloads
- 40
- Likes
- 3
- Rating
- 0
P
Printablesjuha_j
Tandberg reel lock
Reel locking piece for Tandberg reel to reel deck. May fit on others, with 4mm shaft. (added later notches on tips of locking part) Print Settings Printer Brand: Creality Printer: Ender 2 **Supports:** Yes Resolution: 0,12 **Infill:** 100…
- Downloads
- 37
- Likes
- 1
- Rating
- 0
P
Printablesjuha_j
Shampoo drainer
Useless thing to drain last drops of shampoo bottle to another one. Print Settings Printer Brand: Anycubic Printer: All-metal Mega **Rafts:** No Supports: No **Resolution:** 0,12-0,2 Infill: 15 **Filament:** - PLA Category: Bathroom
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
Printablesjuha_j
Hot Wheels jump ramp support
Support pillar for Hot Wheels jump ramp. Print Settings Printer: CTC Rafts: Doesn't Matter **Supports:** No Resolution: 0,1-0,15 **Infill:** 20% Category: Toys & Games
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
Printablesjuha_j
KT88 Vacuum Tube Stand
Stand for KT88 Vacuum Tube. Print Settings Printer Brand: Anycubic Printer: All-metal Mega **Rafts:** No Supports: Yes **Resolution:** 0,16 Infill: 20 **Filament:** Your favorite pla Notes: Tube with collar diameter 41,3mm fits without…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
Printablesjuha_j
Part cooling duct for Anycubic i3 Mega Ultrabase
Here's remixed duct for Anycubic i3 Mega. Uses standard 5015 blower fan. Clips of duct will be tight, wiggle duct while pushing on bearings. As requested added mirrored version of cooling duct. Added also adapter for 40mm fan, design may…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
Printablesjuha_j
Tower Pro SG92R adapter for S3003 slot
Hi, This adapter to fit Tower Pro SG92R servo on Futaba S3003 slot. SG92R's hole on adapter is tight, so use file or sharp knife for snug fit. SG92R will be at exact position of S3003 when using same mounting holes, so no need to modify…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Anycubic i3 Mega UltraBase fan duct for stepper drivers
Stepper driver cooling duct for Anycube i3 Mega UltraBase. On picture, TMC2208 drivers installed and wires reversed at motherboard connectors. Made another more effective one: https://www.thingiverse.com/thing:2908312 Print Settings…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
AEG Favorit dishwasher water circulation pump wheel
Hi, Here's wheel for dishwasher water circulation pump. It fits for ACC EB085d25/2t pump. AEG p/n: 1113196008 replaces: 1110996905 Printed on PETG with 100% infill and 0.2mm layer. printed slowly 800mm/min for good adhession and surface…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
Printablesjuha_j
Sonoff NSPanel Stand EU (86type)
Sonoff NSPanel EU (86type) stand. Holds panel securely while programming / testing on desk. Print Settings Printer: Modified Anycubic i3 Mega Rafts: No **Supports:** Yes Resolution: 0,24 **Filament:** eSun PLA black Notes: 5 bottom, 5 top…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
Printablesjuha_j
Frsky X4R-SB case
Hi, Here's case for Frsky X4R-SB, which fits on Diatone ET160. Can be stacked also over Naze32 or other FC's with screw holes on 30,5mm pitch. 8mm M3 stand off's or normal M3 nuts can be used for fixing. Added another print also, in case…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Part and hotend cooling for Ender-2
Hi, here's combined part- and hotend cooling for Ender-2. Part cooling fan is wired to motherboard K_fan connector, check polarity when connecting. With this cooling, there is no flow from hotend fan towards print, so ABS prints will get…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Mini Talon Motor Mount Remix M3x34mm
Hi, This is motor mount for Mini Talon FPV Plane. M3 nuts are placed inside the print, maximum thickness of nut is 3mm. I used 2,3mm thick nuts, which worked fine on this project. You can use 10mm dummy on opposite corner of printing area…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Onewire Esp8266 Hub
Case for Onewire hub with Esp8266 and breakout board. Breakout board: https://www.aliexpress.com/item/1005004365502115.html M3 inserts: https://www.aliexpress.com/item/4000232858343.html Wago's:…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printablesjuha_j
Shim for Ender-2 Titan extruder upgrade
Hi, Upgraded stock extruder to E3D Titan (mirrored) Extruder with 0,9deg motor. Installation was little bit challenging, but got it there nicely. Shim plate is needed and you need to file small notch on edge of original holder. Print…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
Printablesjuha_j
Vtx and MicroMinimOSD holder for ZMR250
Hi, this is holder for Aomway 200mW Vtx and Micro Minim OSD. One goal was to have easy access to channel dip switches, so when racing with friends there's no need to tear down complete quad ;) Work is still in progress, got to figure out…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Frame support for Eachine E010
Hi, here's frame support for Eachine E010. Now frame feels more stiff. Hopefully motor cups will now take hits better and supports struts will last longer. Uploaded two files 46mm and 47mm motor to motor distance. Edit: added 1mm thick…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Mobius holder for Rotoracer RR210
Hi, here is Mobius holder for Rotoracer RR210. Use velcro on surface and bottom of camera. Camera angle is 25 degrees. Print Settings Printer: CTC Supports: Yes **Resolution:** 0,15 Infill: 50% Notes: Printed on ABS. Category: Hobby
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Plastico 250
Hi, This is my remix of listed sources. I had spare ZMR250 arms.. so got to do something. So combined two thing's together and after hours of drawing and sketching it started to get its shape. Used Atom Pdb which has slot for micro…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
Printablesjuha_j
Launch base for Micro-quad with belly battery :)
Hi, here's launch base for micro-quads. It helps on take off, quad stays stable ton top of it. just press launch base into grass or other soft surface, check leveling and you're ready to go. :) Internal diameter is 113mm, scale as needed.…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Fitting adapter for PTFE Filament and Cable Guide for CTC
My on-hand stock had 4mm push-in fittings with 10mm thread only and parts were already printed and had hole size for M6, So decided to make adapter, which I attached with epoxy glue. Turn fittings into adapter before gluing. Print…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Antenna holder for Diatone ET160
Hi, This is antenna holder for Diatone ET160. Incase you use Frsky rx with thin antenna wires. You may need to file one corner of nuts get it deep enough, depends of thickness of nut. Use two 3mm straw inside each other (flatten, bend…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Aomway 200mW holder for Diatone ET160
Hi, this is holder for Aomway 200mW Vtx on Diatone ET160. Print Settings Printer: CTC Rafts: No **Supports:** Yes Resolution: 0,1 **Infill:** 50% Category: R/C Vehicles
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Fixing clip for Massive fluorecent lamp
Hi, this is fixing clip for Massive 21w fluorecent lamp. Print Settings Printer: CTC Rafts: No **Supports:** No Resolution: 0,1 **Infill:** 100% Category: Replacement Parts
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Little Bee esc cover for Diatone ET160 arm
Hi, here's my first 'Thing'.. :) That's just cover for Little Bee ESC which fits on Diatone ET160 arm. Attached also Sketchup file.. feel free to modify. Category: R/C Vehicles
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
CTC Fan Duct
Hi, Previously I had on my that 'wild boar' looking cooling duct on my CTC. But now I upgraded to E3D hotends, so there was also nee for new cooling duct. Found one close enough and remixed that one. Made some modification on angle…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
RCX X130 Little Bee esc cover
Hi, Here's esc cover for Little Bee 20A on RCX X130 frame. Print Settings Printer: CTC Rafts: No **Supports:** No Resolution: 0,15 **Infill:** 50% Category: Hobby
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Diatone ET160 Mobius mount
Hi, here's Mobius mount for Diatone ET160 frame. Enjoy! Print Settings Printer: CTC Rafts: No **Supports:** Yes Resolution: 0,1-0,2 **Infill:** 20% Category: R/C Vehicles
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Clip for filament guide tube
Hi, here's clip for 4mm filament guide tubing on CTC 3D printer. http://www.thingiverse.com/thing:340031 Print Settings Printer: CTC Rafts: No **Supports:** No Resolution: 0,2 **Infill:** 50% Category: 3D Printer Accessories
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Eachine 700TVL holder for Diatone ET160
Hi, this is Eachine 700TVL camera holder for Diatone ET160 frame. Thanks to Jussi H. for 250 sized design!! Edit: 9/2017, as this camera is not very good quality, you could consider longer stand off's and use Runcam Mini or Micro 2…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Junction box cover for Philips Ensis
Junction box cover for finnish roof junction box around Philips Ensis cover. Hole diameter on roof panels was 100mm, cover plates slips between panels and junction box. Category: Decor
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Anycubic i3 Mega Ultrabase driver cooling duct (ultimate)
Hi, I have i3 Mega UltraBase with TMC2208 drivers. Designed and made this duct https://www.thingiverse.com/thing:2773533 for it. It was ok, until I went to Marlin 1.1.8. I was able to reach higher speeds (Linear Advance) and…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Spacer / Pedal for old tricycle
Spacer/pedal to replace broken one. Print Settings Printer: Anycubic i3 mega UltraBase Rafts: No **Supports:** Yes Resolution: 0,15 **Infill:** 70 Notes: ABS, use brim for safe adhesion. Category: Replacement Parts
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
CTC 3D Bowden motor bracket
Hi, Decided to upgrade CTC 3D with E3D v6 hotends. It was clear that some kind stepper motor bracket are needed for bowden setup, so I designed my own. Hope you like it. On T-part, use M3 theat tap to make threat, open holes with 2,5mm…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Runcam pz0420m holder for RCX X130
Hi, Here's holder to mount PZ0420M fpv cam to RCX X130 frame. Use M2 screws for fixing. You may need to drill holes open. Print Settings Printer: CTC Rafts: No **Supports:** No Resolution: 0,15 **Infill:** 50% Category: Hobby
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Xiaomi Yi holder for Rotoracer RR210
Hi, this is Xiaomi Yi holder for Rotoracer RR210. Angle is 25 degrees. Print Settings Printer: CTC Rafts: No **Supports:** Yes Resolution: 0,15 **Infill:** 50% Notes: Printed on ABS. Category: Hobby
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Extruder CTC
Hi, This is remix of "Dual extruder CTC". I just separate base plate for easier printing on ABS an for easier maintaining in case nozzle blockage. This spring works perfect. 2 springs needed.…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesjuha_j
Air duct for CTC 3D printer stepper drivers
Hi, All the fans started to be too loud so decided to upgrade them. I draw air duct to ensure proper air flow over stepper drivers as air flow provided with new fan is lower that original fan had. Nothing special on printing, supports…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
These are all currently available results.