Counting matching models…
PLA 0.2mm. Numbers were printed without top and bottom layers with 25% honeycomb infill. UPDATE - 01.02.2023. 1. Following suggestions of Chiefton I added "0" and additional base for two digit numbers. 2. Original base is now 0.2mm higher.
I designed this coins to draw seats on the exam (takers' tables can be marked with numbers from my other project: https://www.printables.com/model/367032-exam-table-numbers-or-place-markings-for-guests-at ) The clover stem points to the…
LUCKY 13 drill sergeant hat
Main body parts should be printed in vase mode. The whiskers can optionally be bent wider after heating. The fit should be sufficient, but if your printer is "too precise" :-) a bit of sticky tape will do the trick.
Print in vase mode. If the closure is too loose, scale the diameter to 82mm or less.
Print without supports! Design for an FDM printer ...but with resin it looks better.
Print from PLA on default settings.
My intention was to create both a lamp and a neon. Since the original logo is red, I will probably use RGB tape, but you can also print the lid in color. I was inspired by the project:…
Print elements in different colors, preferably with SILK PLA.
All original parts are on page: https://www.printables.com/model/40437-onion-lamp-shade I had a problem with the leaf adhering to the table, so I redesigned it from scratch, keeping all dimensions and assembly points. I originally…
Key tag/label easy to print, does not require supports and is easy to assemble. Update 19.08.2024: Tighter version of the inner frame for more precise printers. The original design was for an Ender printer.
(...)"Over and over again, flames of love"
The original idea was to cut a little the plexiglass but it is enough to touch the bases to the ends without damaging the glass. In the project I used glass for the bathroom door…
Printables badge stand with Printables logo.
The idea is based on a spool with a standard inner diameter, but narrower (40mm), which can be printed in the shortest possible time - in my case about 3 hours. As a result, it is quite delicate, so the PLA version did not work…
This lock can be used to immobilize the second cartridge (after slightly modifying the printer) or if you damage the original. The model was created by the way as a stage of building a filament hanger that fits the printer chamber. I…
These are all currently available results.
