Counting matching models…
Traxxas Revo 3.3 Conversion from Nitro to 4S - Two speed Nitro Revo 3.3 Transmission conversion to Forward Only (Reverse is now done with electric, as is Braking). The Two speed trans is also converted to Second Gear Only (Second Gear…
Traxxas Revo Conversion - Drivers Side Running Board (Floor Tray). Only Supports Battery Box and Side support for Shell. Uses existing Chassis holes no drilling required. Threads printed so no nuts required. Passengers Side posted…
Traxxas Revo 3.3 Converted to 4S. This is the ESC tray. Uses existing holes in Revo Alum Chassis, no drilling required. I used one 4mm machine screw and one 3mm machine screw to attach through existing chassis holes. The round bosses on…
Traxxas Revo Conversion - Passengers Side Running Board (Floor Tray). Similar to Drivers side, this Floor Tray supports the Battery Box and if the drill gauge is printed the holes for the Samix EC5 mount can bolt onto this also. This side…
Traxxas Revo 3.3 Conversion - Mounts the Battery Box to the Floor Trays - Uses printed threads. screws come up from bottom - must not stick up into battery tray four 4mm 15mm long to floor trays and four 4x10mm screws to Battery Tray.…
Traxxas Revo 3.3 Conversion Receiver Box. Either of these Receiver Boxes will bolt onto the Tray posted separately. Big Shout Out to https://www.printables.com/@chuyskywalker for the basic design of these boxes. Tabs for mounting have…
This is the base tray to hold a Receiver box. It mounts over the rear shocks, but does not interfere with the shocks or suspension. I do recommend changing the rear shock screws out to a longer screw. I used 18-8 Stainless Steel Socket…
This just Hard mounts the EC5 connector on the ESC to any flat surface. In this case, the Passenger's side "Running Board". It makes plugging in and unplugging batteries easier. The two halves are bolted together with 18-8 Stainless Steel…
Cobra8 ESC Top Cap. Fits ESC Tray I posted. I used two 18-8 Stainless Steel Socket Head Screw, M3 x 0.5 mm Thread, 35 mm Long to bolt the ESC in with. Used 3mm washer also but not necessary. The machine threads in to the ESC tray so no…
These are all currently available results.
