Counting matching models…
Just a simple Stringing-Test 0.6mm base height + 25mm Tower height = 25.6mm Wall thickness = 1.2mm Print Settings Printer: Anycubic Mega-S Rafts: No Supports: No Resolution: 0.2 Filament: Printament PETG/PLA/others Green Category: 3D…
About I noticed the screw wobbles alot and thats why sometimes my nozzle scratches the bed. Then i designed this and it already improves it alot. In other words: It stabilizes the Z-Endstop-Screw so the Z-Axis does not tend to stop lower…
If you want to print in vase/spiral-mode use the filled model. Don't forget to set top layers to 0 and the bottom minimum 3-6 layers. You can also use the 1mm thick hollow model for normal printing Checkout my other Designs :) Category:…
Best to print with a 0.6mm Nozzle :)
Be sure it sticks on the Bed Print Settings Printer: Tevo Tarantula Rafts: No Supports: No Resolution: 0.2 Infill: does not matter Custom Section Update-Log Update 25. Jan. 2018: * Added Stable Versions (One more connection Point between…
The Circle-Diameter is 10cm. Scale it like you need it in your Slicer Category: Art
The gap is ~0.5mm Category: Fashion
20x20x20mm Cube with soft/rounded edges (except the bottom) to reduce measurement failures at the calibrating process caused by blobs or similar. Print Settings Printer: Anycubic i3 Mega & Mega-S Rafts: No Supports: No Resolution: 0.2…
Simple Showerhead for Shower Hose Height: 16cm Print the top as first layer Bottom solid Layers: 5 Top solid Layers: 10 German: Einfacher Duschkopf für Duschschlauch Höhe: 16cm So drucken, dass das Oberteil der erste Layer wird Bottom…
Just made this because some people like it symmetric in another way ^^ Category: 3D Printing
If you want to print in vase/spiral-mode use the filled model. Don't forget to set top layers to 0 and the bottom minimum 3-6 layers. You can also use the 1mm thick hollow model for normal printing Checkout my other Designs :) Category: Art
If you want to print in vase/spiral-mode use the filled model. Don't forget to set top layers to 0 and the bottom minimum 3-6 layers. You can also use the 1mm thick hollow model for normal printing Checkout my other Designs :) Category:…
Had to make a z-Enstop Mount for this setup: https://www.thingiverse.com/thing:1580899 & https://www.thingiverse.com/thing:2628544 Category: 3D Printer Accessories
Skoda Fabia Mk1 (6Y) Rear Wiper Arm Conversion Mod Upgrade your annoying stock rear wiper setup to use high-quality, easily accessible aftermarket wiper blades such as the Bosch Rear H351 (3397004629) or any standard rear blade with a…
These are all currently available results.
