Counting matching models…
this is an adapter to use Stabilo pens in a Cricut Joy plotter/cutter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 15 % Filament: does not matter PLA does not matter Notes: I used…
a useful print to organize the extruder cables for the Sovol SV04 IDEX printer. Also useful to make use of the “mirror feature” because you will need a mirrored part for the second extruder. You will also need a M4 screw and nut and a M5…
a different stem, a little flowervase and some printed water and voila, the little rose is a perfect gift. Based on Rose and stem by patwik Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2…
I installed a new Meanwell LRS-350-24 power supply on my Ender 3 and needed a new mounting case to fit the smaller power supply. Additionally I wanted to connect the Raspberry Pi with a QC 3.0 USB-power supply. These things are for ships,…
Feel free to use colour change at 1.8 mm to switch from water to land :-)
this is a checkered version of my dual colour CaliDice. Prints without support.
longer handles for the Fast-Operation Vise. There is the XL-version and an even longer XXL-version of the handle. You can find the complete model here: https://www.printables.com/de/model/51074-fast-operation-vise
a cover cap for the feet of a FlexiSpot Basic table frame to gain a defined distance to the wall. Printed with TPU filament, 20% infill, no support needed. Gives an additional 45 mm clearance to the wall and therefore the desktop will not…
a mug with a flat back and a voronized handle. Second version is completely voronized, but may not be watertight :-)
This LED holder works fine with PARLAT LED-stripes. You need two for one stripe. You will need M4 bolts and wingnuts to mount it to the extrusion and optinal M3 bolts to hold the LED stripes in place. There is and angled version and a…
I needed a modified 1x2 plate for a little building project, a Möbius strip out of brickplates So I created one with one knob up, one knob down. https://en.wikipedia.org/wiki/M%C3%B6bius_strip print orientation should be on one side with…
a scan of the Otto von Schwerin statue located in Altlandsberg, Germany
Tried to mount an UNITAK3D LED kit for an Ender 3 on my CR6SE. Unfortunately the CR6 frame has much less options to hide the cable than the Ender 3 frame. Therefore I decided to create a somewhat cablebridge over the left side of the…
Top and bottom parts to give a z-wobble tower a useful second purpose. I needed something to place a Beagle Cam high enough to film a Sovol SV04. Had some z-wobble towers lying around and modelled fitting tabletops and a bottom mount. The…
Handgriff für https://www.printables.com/de/model/336667
Fan mount for PI-BLOX enclosures, a Raspberry Pi case which ist compatible to the common brick system. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/czydiT8dqz5 Print Settings Printer Brand: Creality…
a cap for a 60mm can which contains 85 g. I printed it in TPU and it fits nicely. Prevents flies from getting to close to unused catfood :-)
a tiny holder to connect the Pi-camera to the OneNineDesign touchscreen case. The case has a slot to mount the camera, but only in one angle and way to low for my Ender 3 printbed. There are two versions, one for a normal Ender 3 and one…
clamp as a replacement for older ALNO kitchen furniture from the 1990 to 2000. There is a left-oriented and a right-oriented version although the original was designed for both directions. This thing was made with Tinkercad. Edit it…
A distant part to use golf bags with side pocket with a Costway 4 wheel golf trolley. Adds about 45 mm heights. Printed with TPU and 20 % infill, no support needed
This a 45° stand for a TouchPi case to run Octodash in an ergonomic angle. It is mounted with 4 M4 bolts and nuts to the backplate of the TouchPi Case. You need to drill 4mm holes into the backplate of the TouchPi Case. Or you simply glue…
I needed something to suck away the soldering fumes. I had an unused CPU fan and a large Calicat (3 times larger than normal). I created a simple adapter to mount the fan on top of the cat. Used copper coloured PLA to give it some…
These are all currently available results.
