Counting matching models…
This is a Silica Box for storage of Filaments in Muesli Foodcontainer (see pictures) I printed it in transparent PLA Filament. At least by printing with Bambulab X1 no support was required. Category: 3D Printer Accessories
Steampunk Case for Internet Radio. Electronic is based on Edzelf's ESP32-Radio: https://github.com/Edzelf/ESP32-Radio The Plasma Disc can be bought on different shops for approx. 15 Euro The Plasma Tube on the right is just powered by a…
This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness. The Leather Applications are not required but make it comfortable and look…
This is a spare part for EFLITE UMX Turbo Timber. Print with TPU or similar soft material! Print Settings Printer: Franx 3D Printer Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20 Filament: Das Filament TPU Black Notes: for best…
These are my Floats for the E-Flite UMX Turbo Timber. I designed them like the original floats EFLUA1190 since they were not available to buy for long time. I printed them with PolyLight Foam PLA from 3dlabprint to save weight. Reduce the…
Simple Grips for Allen Wrenches in 6 sizes for easy use. Use the long end for fast driving and the short end for high torque. Category: Hand Tools
This is a simple Box to store 4 spare propellers of your DJI Avata. Created with Plasticity. Category: Hobby
This is my Single Eye FPV Goggle using a Virhuck Monitor inside. The Idea behind this Project was to overcome the restriction that you always must have a Spotter when you fly via FPV or otherwise need direct View to your flight model.…
A simple housing for LILYGO® TTGO T5 V2.0 WiFi Wireless Module bluetooth ESP32 2.13 e-Paper Display Development Board…
Camera Mount for E-Flite UMX Timber or UMX Turbo Timber. Fits for Camera Eachine TX-06 or similar. For least modifications on the Timber model this mount uses its own 1S/160mAh battery and 2 plastic screws. Only 2 M3 bolts must be glued…
Taranis X9D+ is an awesome transmitter but I rather like Pult-Radios. This is my pult tray addon for the X9D. I propose to make the Bails, Baseplate and Brackets of Aluminium. All other parts can be printed in 3D. Thanks to rophos who…
Sometimes it is hard to see what an RC receiver really outputs on each channel because programming of Transmitters and their Mixers sometimes is weird. Even more programming is different between various brands. This Servo Simulator…
This is my Car Radio TX with MultliModule ( https://github.com/pascallanger/DIY-Multiprotocol-TX-Module ) and OpenTX ( https://www.open-tx.org ) on small sized Arduino Mega 2560 PRO. I designed this radio because I didn't find any Pistol…
For safe storage of LiPo Batteries I use used ammunition ammos which are available e.g. on ebay at low cost. Important: The ammo cans are sealed waterproof. Cut out a small piece of the seal for possible exhaust in case of a thermal…
This is a simple cap for your Beverage Can to protect against Insects. Always stay safe when drinking out of Cans without hidden wasps :-) You may want to use the attached gcode files created with Cura. They should work on any Prusa like…
This is a simple Servo Signal Generator / Analyzer using an Arduino Nano and a DIP204-4 LCD. The Output provides a Servo Signal Pulse with 20ms Period. Arduino Source Code is also provided. The Pulse Width can be controlled via Poti…
Finally I found suitable Box to store my Filaments. From IKEA I bought an RYKTA Box (24x36x23 cm/14.5 l). https://www.ikea.com/de/de/p/rykta-box-mit-deckel-transparent-graublau-10533205/ The Box fits for 5 spools of 800g or 4 spools of…
Stand for comfortable use if the DIY Scope shell. Includes hole for 9V battery. There are 2 versions: In DSO-ScopeStand2.stl you push the connector of the 9V battery through the hole. If your connector is too big for the hole then use…
Many Batteries are fixed with velco. But for this fixation you have to apply velcro to all of your Batteries. This Solution just uses a rubber band and this print part. You can easily mount every battery without velcro and also move it to…
Many Batteries are fixed with velco. But for this fixation you have to apply velcro to all of your Batteries. This Solution just uses a rubber band and this print part. You can easily mount every battery without velcro and also move it to…
A Kitchen Timer with Rotary Button to select time and start/stop timer. 2 Modes: hours:minutes or minutes:seconds Using TTGO T-Display and mini amplifier for least effort. Additional circuit only for switching off standby crurent. Source…
I liked my old console transmitter Graupner mc24 with its DSM2 module but from technology point of view it has some disadvantages such as missing model match, no digital trim, no voice audio, no telemetry, etc. Now I got a Turnigy 9XR pro…
This is a remix of Goodson's Hobbies Rims intended for the T2M Swinger Crawler The rims fit to alternative Tires from https://de.aliexpress.com/item/32901519574.html The remix has less details and should be more robust. Note that these…
This tiny box protects your eachine E010S and also stores some batteries, charger and tools. I added some rubber dampers at the bottom of the middle part of the case. Have fun :-) Update: I added another cover (E010S_o2.stl) that gives…
This is my Goggles using parts of a Quanum FPV Goggle. The Quanum was not very comfortable to wear and the Fresnel Lens was not well for hyperopia. So I decided to use the LCD screen and headband, exchange the Video Receiver by a…
If you have a Quanum Cyclops FPV Goggle and you need to wear glasses you might feel uncomfortable. Since this Goggle is shipped with an additional spare fresnel lens I tried to put these 2 lenses in serial. And it works: I don't need my…
If your Taranis has long Sticks installed from https://rctechnik.de/ then you might need this suitable Sticksafer. Print Settings Printer: Franx 3D Printer Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Das Filament PLA red…
This is my improved version of the Box for Lizard 95 (previous version see https://www.thingiverse.com/thing:2472510 ) Most of all the Box was changed to fit for my modified Lizard 95 with a RunCam Micro Swift plus an ATX03 transmitter.…
The eachine Lizard95 is an awesome piece of fun! This Box is an appropriate case for storage and transportation where you can also put some spare parts in it. It is big enough for the Lizard plus my additional Landing Skid. If you don't…
I made this Landing Skid because I don't want to hit the ground with the Battery. Also includes a 4mm plate so that the battery and velcro can be mounted level. The Skid exists in 3 versions: with 4 feet below the motors "Skid4feet.stl"…
These are all currently available results.
