Counting matching models…
I wanted to reuse my old ITX motherboard and ATX power supply to create a small NAS with all my old HDDs. I only use it to power it up a few times per year to create a backup from my main server. Just to have some extra backup. It is not…
Just startet out with my Honeycomb Storage Wall and designed some hooks, mount and holder for my items. Heres my version of a headphone hanger.
Hi, so I had some of these 8x8 LED Matrix panels laying around here and wanted to do something with it. I found the awesome matrix project from blueforcer which is open source. I wanted to use these 8x8 panels from CJMCU. Due to the…
Just startet out with my Honeycomb Storage Wall and designed some hooks, mount and holder for my items. Heres my version of a cable hanger / organiser.
I loved my old aiwa Minidisc Player and I wanted to keep it functional. The original LIB-902 LiIon battery had leaked and was dead anyway. So I discovered that already some adapter from the 10440 cells are available. But I wanted them to…
I kept the back open and made the openings for the sensors quite big. This way the temperature readings are very accurate without resorting to a offset due to self-heating of the device. Designed to be printed front side down without…
I really liked the OSOYOO 5 inch touchscreen. Works perfectly with Raspberry and is available here in Germany from Amazon. Couldn't find the perfect display mount for this display, so made my own. My printer was a 300x300 LDO Kit. So the…
This is my version of a PS Vita mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without support.
Nothing special to add. Should be self explanatory. Print it laying on the side so the filamnet guide gets print smoothly. Needs some support, but nothing special.
This is my version of a Switch Lite mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without support.
This is my version of a ES15 Driver and Bit holder for the Honeycomb Storage Wall system. Your default bits are always easy to get and all of the other normally never used additional bit you get can be stored in a small drawer. Print it…
I didn't like the quality of the printed parts of the Rekon35 frame I got a few weeks ago. Still have to build it, but first made the parts I needed. Nicer GPS mount Caddx peanut mount The frame/battery mounts are done with spacers…
I wanted to build the awesome looking and functional sensor housing from Tom and bought the corresponding sensors and the display. Unfortunatly the display I got was 2,4inches, but the original model was designed for the 2,8inch variant.…
This is my version of a Radiomaster MT12 mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without…
This is my version of a HackRF PortaPack H2+ mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without…
Got new lock and keys. For daily use I wanted to have a semi fixed doorknob to open and close the doors from the inside without looking for the keys everytime. But I wanted them also to be removable for holidays and other occasions. So I…
My version of a TPU printed DJI battery holder. Designed to fit my 48mm Fatstrap headband. The strap also loosened a lot of times, so I also made some "clips" to keep the band in place. Works perfectly for me. Print in TPU and squeeze the…
New Parts for the DJI conversion of my trusty Armattan Marmotte. All TPU Category: R/C Vehicles
Broke the bottom USB / S.PORT cover on my old QX7. Made a matchin one in orange and added matching markings on the inside for the ports. Category: R/C Vehicles
Just startet out with my Honeycomb Storage Wall and designed some hooks, mount and holder for my items. This is just one more of them :D
Parts I made for my Hyperlite Freerange Frame. Specifically for DJI camera and Crossfire nanoRX/Immortal-T. The HD camera mount is meant to be used with the Caddx Peanut. Screwed on the front and clamped to the top plate in the back.…
A Second Immortal-T mount I made for my Armattan Chameleon copter. Also Printed in TPU, mounted on the bottom. Very well protected and a nice fit. No way to loose the antenna this way. Should also fit on every other quad with 30.5 x…
This is my version of a Retroid Pocket 3+ mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without…
This is my version of a Miyoo Mini mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without support.
Hello, I only use TBS Crossfire on my quads therefore I don't really need the 2,4GHz Module/Antenna. I wanted to remove the antenna because it's often in the way. But I opted to mount a SMA connector for the 2,4GHz just in case I need it…
Made some Parts for my Armattan Marmotte Frame. Needed an Adapter for the GoPro7
These are all currently available results.
