Counting matching models…
If gears are stuck, it might be caused by stringing or seam alignment(use random seam for best results), which can leave a ridge that causes jams. To ensure smoother operation, perform post-processing such as sanding down the shafts and…
Various holes for drilling different diameters (5–12 mm) Guides for accurate 90° and 45° drilling Integrated ruler (115 mm) for precise alignment Labeled hole sizes for easy identification Units: Metric millimeters (mm) Built-in grooves…
Compact keychains Only 10-15min printing per keychain! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a…
Optimized with a honeycomb structure for reduced weight (up to 41% lighter) while maintaining strength. This modular filament holder is designed with a friction fit system —parts securely snap together without the need for screws or glue.…
This is a USB-A cap designed to protect the connector from dust and damage. It fits both USB flash drives and USB-A cables. Choose from 3 types of tolerances for perfect fit!
Triple-Blade Propeller – Precision-Tuned Variants This design is a carefully refined version of the classic 10x5 two-blade propeller, upgraded to a triple-blade configuration for improved thrust balance and smoother operation. The…
45° Drilling Jigs – IN, OUT & STRAIGHT Set of 3 drilling guides for precise hole placement: IN – drills 45° inward into corners OUT – drills 45° outward from corners STRAIGHT – drills perpendicular holes along flat surfaces Each jig…
90mm EDF 12blade Propeller. I recommend printing it from stronger filaments like : PETG , Nilon , Carbon reinforced nilon ... Category: Other
90mm EDF Recommended motor : 2826 ( i have 1000kv(it have around 70-100g trust) - its too low for EDF i recommend higher kv motor for higher revolutions) With this trust it cannot be used in model airplanes . I recommend have it like a…
For getting multi colour print on one colour printed use post procesing script pause at height and change the filament to other colour ( USE PLA TO PLA not PLA TO PETG IT WONT STICK TOGETHER.) - choose this file : Ruller TEXT OUT for…
Model of working PulseJet Engine . Variable Scales (100mm,150mm,200mm) -Inspired By Integza
This is WD-40 Keychain Use Post Procesing Script (pause at height) in this model the height (layers) is 10 with 0.2mm Layer Height, to change the filament. 100% Infill
Skoda Octavia Keychain The model includes two versions for easier attachment to keys: 3 mm keyring hole – recommended if you use a split ring keychain 6 mm keyring hole – for directly sliding keys through the hole (no split ring needed)…
Skoda Fabia Keychain The model includes two versions for easier attachment to keys: 3 mm keyring hole – recommended if you use a split ring keychain 6 mm keyring hole – for directly sliding keys through the hole (no split ring needed)…
Skoda Superb Keychain The model includes two versions for easier attachment to keys:fff 3 mm keyring hole – recommended if you use a split ring keychain 6 mm keyring hole – for directly sliding keys through the hole (no split ring needed)…
Ice Cube Tray Two Types are available: Type 1: 17mm Height (2x8) Type 2: 22mm Height (2x8)
Filament Spool Holder for Ender 3 V3 SE or any printer with a 30 mm filament mount diameter . Printable from PLA or PETG Includes a locking thread to secure the spool holder in place Requires type 608 bearings : Outer diameter: 22 mm…
Compact keychain Only 10-15min printing! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a classic…
Boeing Keychain 100% infill I Recomend using Postprocesing Script (pause at height ) to change the filament during printing and achieve multicolour print with clasic 3d printer
To assemble the parts, I recommend using CA glue. Print settings: 0.2 mm layer height, 0.4 mm nozzle or smaller (if you use a different nozzle size than 0.4 mm, make sure to adjust the layer height accordingly). Material: PLA or PETG.
Introduction: Designed for 1 kg spools with a diameter of 200 mm. Compatible also with smaller spools! Choose the number of spools you want to use. You can Use it in Filament Dryboxes ! I used an PVC length of ≈ 390 mm for 5 spools (with…
Classic Screw organizer 70x50x8mm (inner measurements) - outer measurements is : 74x54x8 Can be used when repairing something when you need to put away a screw,nut ,…
Propeller powered by turbine (Experimental) FREE Its free because its EXPERIMENTAL Model.( it is not perfect) Turbine can rotate high speed , be Carefull . If its not balanced properly the vibrations can broke the holder . I bear no…
This model is used to accurately calibrate X, Y, and Z dimensions. If the printed part does not match the dimensions in the drawing, adjust XY Contour Compensation and XY Hole Compensation in Slicer. Increasing these values adds more…
Skoda Felicia Keychain The model includes two versions for easier attachment to keys: 3 mm keyring hole – recommended if you use a split ring keychain 6 mm keyring hole – for directly sliding keys through the hole (no split ring needed)…
Screw Fidget toy 20% infil gyroid/or any which you want
Wall-mounted aircraft holder designed for RC airplanes with a wingspan around 1500 mm , such as the Beta 1400. The drawing shows only the main / reference dimensions needed for orientation. The holder is designed to be mounted to a wall…
Pushrod Keeper for Turbo Timber Evolution / E-flite Timber – 1mm Pushrod Designed for: 1mm pushrod, suitable for 90° bent pushrods Infill: 100% Layer height: 0.12mm (for best performance) Material: PLA possible, PETG recommended for…
This is a heavily modified and improved version of the original CG Scale project by olkal . Key Modifications & Improvements: Heat-Set Inserts: Replaced those annoying bottom-entry screws with standard M3 heat inserts (M3×5×4 mm) .…
Compact keychain Only 10-15min printing! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a classic…
Compact keychain Only 10-15min printing! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a classic…
Compact keychain Only 10-15min printing! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a classic…
Beta 1400V2/V1 Krytky serv / Beta 1400 V2/V1 Servo Tray Category: DIY
Adjusted desing for Prusament Filament. Fully compatible with original files! Original Desing : Click here
SK: NRJ F3K Unašač serv Tento držiak serv som navrhol pri oprave trupu môjho F3K modelu NRJ, pretože som potreboval náhradu za pôvodný diel. Tento model zdieľam, aby mohol pomôcť aj niekomu ďalšiemu vo F3K komunite, ak bude tento diel…
These are all currently available results.
