Counting matching models…
Hydroponic garden system (like IKEA vaxer). 3 of these 6-cell modules fit in the basic Ikea Greenhouse (model: SOCKER) Print the vase in "vase mode" with one layer. If you printer cannot do that, try the "thicker-vase.stl" file. I used a…
Fire for use with the great model "Drogon by KerberosFI": https://www.thingiverse.com/thing:3100640 Painted with white->yellow->orange->red Category: Creatures Sharing and creating derivative works is only permitted on printables or…
Necesita soportes, es un poco más corto que el original EDIT: v2: se ha ajustado la distancia del enganche para el gancho de pliegue, debería quedar similar al original. - hook position fixed LICENSE: NON COMMERCIAL prohibida la venta de…
Soporte para fijar el guardabarros del xiaomi m365. ( Para imprimirse necesita, al menos, colocar un soporte en la parte más alta, donde engancha con la luz del guardabarros) Xiaomi Mijia M365 Mudguard Bracket (needs at least 1 support in…
A little adapter to convert the standar hotshoe mount (Canon, Nikon, etc) to a standar tripod 1/4 screw for cameras. V2 has a stronger structure Category: Camera
Set of squares to check the length, width and height of the prints so you can set the steps per mm in firmware. X/Y: 160 x 160 mm outer square X/Y: 80 x 80 mm medium square X/Y: 20 x 20 mm inner square Z: 30 mm inner square and 1 mm…
Flexible filament only. LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without the authorization of the author is forbidden Category: Vehicles
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…
Print from the side. v3.2-> Fixed the light holes and perimeters. // corregidos los agujeros de la luz y los perimetros superiores LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without…
Xiaomi m365 rear wheel side cover - Tapa lateral rueda trasera con agujero Category: Sport & Outdoors
Adapter with 3 picatinny rails for thompson a1m1 (airsoft) Category: Sport & Outdoors
160 x 160 mm outer square 80 x 80 mm medium square 20 x 20 mm inner square 1 mm height I had some problems calibrating the X/Y axis on my prusa i3, so I created this set of squares to check the length and width of the prints UPDATE:…
Front cable protector for Xiaomi Mijia M365 Scooter LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without the authorization of the author is forbidden Category: Vehicles
This is a modification to fit in the Phantom 3 Advanced/pro controller Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: No Supports: No Resolution: 0,2 Infill: 7% Category: R/C Vehicles
Xiaomi Mijia M365 front GoPro Mount Better in PETG Need Supports LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without the authorization of the author is forbidden CHANGELOG: v7…
Ikea växer kit for growing seeds Category: Outdoor & Garden
Picatinny rail adapter for AK-47 (airsoft). Compatible with G36C picatinny rails: http://www.thingiverse.com/thing:362465 Category: Sport & Outdoors
Ganchito con una entrada más fina para que no escapen las bolsas con las vibraciones..-> Mejor imprimir en PETG, ->IMPRIMIR DE LADO para mayor resistencia, haciendo que la primera capa sea un lateral. LICENSE: NON COMMERCIAL prohibida la…
Flexible filament only. Category: Sport & Outdoors
This is a vacuum attachment for the Black & Decker Workmate workbench, but it should be compatible with any workbench or MFT featuring 20mm holes. It features a wide, flat nozzle designed to suction sawdust, cutting debris, and sanding…
Remix of the great Gopro / Karma Grip backpack strap / shoulder mount by McAlex : https://www.thingiverse.com/thing:2101490 I reduced the nut hole so you can use the standar gopro nuts. Category: Camera
A little 3D Riddle that can be useful for educational purposes: "Draw a 3-dimensional picture of a shape that goes through each of these holes, exactly touching all sides as it passes through."…
Regulable Tripod for the Samsung Galaxy S7 Edge Print Settings Printer Brand: RepRap Printer: P3Steel v4.0 Supports: Yes Resolution: 0,2 Category: Mobile Phone
You will need a 1/4-20 UNC Nut Category: Camera
You will need a 1/4-20 UNC Nut Print Settings Printer Brand: RepRap Printer: P3Steel V4.0 Rafts: No Supports: Yes Resolution: 0.2 Infill: 40% Category: Camera
A longer funnel to water the plants in a simple way for the Hydroponic Garden https://www.thingiverse.com/thing:3453939 Print Settings Rafts: No Supports: No Resolution: 0,2mm Infill: 20% Category: Outdoor & Garden
Modification of the great box by Jsmaz4 to be able to put the insta360 x3 together with the Bullet Time Cord, two adapters to the gopro mount and the microfiber cloth. Recommended config: 3 perimeters, infill 15-25% (gyroid for the box…
I had a US/UK to EUR power adapter with a bulky design that didn't fit in almost any wall socket, so taking advantage of the internal metal parts I designed a US to EUR adapter with the European plug format so that it can be used. The…
Gopro Karma Mounting Ring (compatible with the original lock) Remixed from the great "GoPro Karma Mounting Ring by barspin" to use the original locking system with the original lever. Print Settings Printer: QIDI X-PRO Supports: Yes…
Remix of the great "Gopro Remote Control Mount for El Grande Extension Pole" by sjlu https://www.thingiverse.com/thing:2763304 to use with gopro karma grip handle Category: Camera
Una pequeña medalla con el logo de http://www.hispazone.com que sirve cómo test final tras completar la guía de montaje de una Prusa i3: http://www.hispazone.com/Guia/987/Como-montar-una-impresora-3D-casera.html 100 mm de diámetro 10 mm…
A small foot for SKLUM SAURA Chairs
This is a modification to allow this great extruder work with a PTFE tube (4mm-2mm) so you can print faster with flexible filament. I added a place on top for a 1/8 4mm fitting Print Settings Printer Brand: RepRap Printer: P3Steel v4.0…
flush-mount table pedestal base for boats. A stand-alone support base for boat tables, designed to secure tables and other fixtures on boats and sailboats. Dimensions: Outer diameter: 155 mm. Distance between holes: ~125 mm Inner diameter…
based on http://www.thingiverse.com/thing:216198 Category: Mobile Phone
Flat flush-mount pedestal table base for Boats. A pedestal mounting base for boat tables, Base for placing tables and other supports on boats and sailboats. Measurements: Outer diameter of 155 mm. Distance between holes ~125 mm Inner…
Customized version of http://www.thingiverse.com/thing:281157 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=281157 Instructions Using the following options: 5length = 123.8 4swidth = 6.17 Font =…
Lumia 1020 regulable tripod Category: Mobile Phone
This is a remix of Christophe-P's brilliant "Filament Dryer Aircook" model, but divided into four parts for smaller printers. I've added a connector system to help join the four pieces together. It's also recommended to add some type of…
These are all currently available results.
