Counting matching models…
Update 15.10.2023 New Top - less support required New Lid - bigger hole for the screw and more weight that it closes itself (should be printed with 100% infill) - 2 Versions available one has a recess for an M10 nut with a wrench size of…
Flexi low poly Dachshund
Hardware: 4 x M10 nuts (self locking) 1 x M10 Washer 1 x threaded rod M10 - 200mm lenght Threadlocker Settings: 0.20mm Standard +custom settings: Wall loops: min. 5 Outer wall: 25 mm/s Infill 30 % supports are not necessary ABS / PETG…
Update 23.07.2023 Improved claw to prevent the spring from falling out. Settings: 0.20mm Standard +custom settings: Wall loops: 4 supports needed Main part PETG / spring ABS
Settings: 0.20mm Standard +custom settings: Wall loops: min. 2 Infill min. 20% support only on print bed
Protective screen cover - Bambu Lab X1 logo version IMPORTANT to switch to no brim TPU no support
Simple screw caps - round and hex shape available. Wrench sizes: M6 - 10mm M8 - 13mm M10 - 17mm
2 versions available! thighter hinges Size: 180x100mm Hardware: round 6x3mm magnet Settings: 0.20mm Standard +custom settings: Wall loops min. 3 Outer wall: 25 mm/s ( BambuLab 60 mm/s) Infill 30 % supports are not needed PLA / PETG
Settings: 0.20mm Standard +custom settings: Wall loops min. 5 Outer wall: 25 mm/s ( BambuLab 60 mm/s) Infill min. 50 % supports on - but don't support bridges see below PETG preferred
Settings: 0.16mm Standard at 0.16mm layer height support is not necessary PLA / PETG
Cable clip organizer for 20mm wide Velcro or double-sided tape. Settings: 0.20mm Standard Infill min. 30% support needed PLA / PETG
Drippy Tissue Box For tissue boxes with max. 230 x 115 x 65 mm 0.20mm Standard support only for main part PLA / PETG
Ergonomic Sanding Block for 150mm Disc. Each side has 3 recesses for round 15mm velcro Settings: 0.20mm Standard PLA / PETG The photo does not show the current version.
Small cap should be printed in TPU and scale up to 99% Settings: 0.16mm Standard +custom settings: Wall loops min. 3 Infill 100 %
Remix Mini Tape gun for tapes with max. 25mm inner diameter. screw cap threads are left handed My Changes: new plastic cutter the main part is more solid and has a longer handle including a hole for hanging Settings: 0.20mm Standard…
This is a remix from the Y-Splitter for Bambu Lab X1. add 10mm Brim no Support needed print with ABS or PETG the O-ring of the fittings must be removed…
This is a Remix of Pop-up Gift Card Box from 3D Printy . Changes: the hinges of the box are assembled with M3x30mm and I designed my own band. Many thanks to 3D Printy ! To assemble the Box bottom and Box top, 2 pieces of M3x30 cylinder…
I only added the Logo. Settings: 0.20mm Standard +custom settings: Outer wall: 60 mm/s Infill 100% no support PLA / PETG / TPU
Low Poly Cute Dinosaur Toy
Suitable for McDonald's sauces Settings: 0.20mm Standard +custom settings: Wall loops min. 2 Outer wall: 25 mm/s Infill min. 100% PLA / PETG supports only for Part 2 with these settings below Parts Orientation
Size: about 170mm height Settings: 0.20mm Standard Infill 100 % no support PLA/ PETG Use Multimaterial painting - Smart fill in Prusa Slicer. (Bambu Lab see below)
Change: I made the recess for the pot bigger and stronger because it bent open there when screwing it together. Settings: 0.20mm Standard PLA / PETG
simple 45 degree funnel outer diameter about 100mm small diameter inside 12mm NO support needed
T-Handle Stand for INBUS Hex Keys (70129) and Torx Keys (74124) Orientation of the part see below! Settings: 0.20mm Standard NO support needed PLA / PETG
Thread tapping guide M3 - M12 Settings: 0.20mm Standard Wall loops: min. 3 ABS / PETG
I colored the pupils and the text with a pen. Settings: 0.20mm Standard +custom settings: Wall loops: min. 3 Infill 30 % supports are not necessary
The animals have a 3mm hole on the backside. You must paint it yourselve in PrusaSlicer. Settings: 0.20mm Standard Infill 100 % no support PLA/ PETG Use Multimaterial painting - Smart fill in Prusa Slicer. (Bambu Lab see below)
7.5mm hole for the pen I can add more pen diameters write it in the comments Hardware: M6 x 20mm/25mm - 6pcs M6 self-locking nut - 6pcs Settings: 0.20mm Standard +custom settings: Wall loops min. 3 Outer wall: 25 mm/s ( BambuLab 60 mm/s)…
diameter about 100mm 3mm thick 2mm hole for hanging
Use Multimaterial painting - Smart fill in Prusa Slicer. 0.20mm Standard
For 50mm Tapes with 75mm inner diameter. My changes: enlarged the roll for the tape to 75mm added a part to cut off the tape recess for M4 hex nut Harware: 2x M4 x 15/20mm cylinderhead screw 2x M4 hex nut 2x M3 x 8mm countersunk screw 2x…
Chunjie dragon statue Settings: 0.20mm Standard support needed PLA / PETG
Use Multimaterial painting - Smart fill in Prusa Slicer. 0.20mm Standard
1€ size Chip Settings: 0.16mm Standard Infill 100% no support PLA/ PETG Orientation see below
Multicolor rocket kit card Use Multimaterial painting - Smart fill in Prusa Slicer. 0.20mm Standard no support needed the connections should be colored the same as the outer contour of the rocket - see below
diameter about 100mm 3mm thick 2mm hole for hanging
This is a remix of 3D Chihuahua 's handle for the Bambu Lab X1. 0,2mm layer height no support needed Be careful when assembling so you don't damage the glass.
about 85mm height 3mm thick
Settings: 0.20mm Standard support needed PLA / PETG
Max. Tissue Box Size: 125 x 115 x 125 mm ( l x b x h ) There are 2 versions available, each with 2 patterns. Version 1: with separate lid Version 2: to slip over Settings: 0.2mm Standard Wall loops: min. 3 Infill 20 %
Suitable for sponges with these dimensions: b=55mm l =90mm h=25mm Printer: Prusa Mk3s+ Supports: YES Resolution: 0.2 Infill: 20% Gyroid Notes: printed in Renkforce Silver PLA
Bottom-top-handle are orginial parts from @chrise_2000 only scaled up to 100mm diameter. Lithophane are a new design from me. Settings: layer height: 0,16mm Infill min 20 % support needed only for handle PLA/ PETG
Max. Tissue Box size: 130 x 130 x 130 mm There are 3 patterns available - Box 2 and Box 3 are also available with the pattern only on 2 sides. Settings: 0.2mm Standard Wall loops: min. 2 Infill 20 % Support not necessary
Support settings Bambu Lab: I painted the supports tree (auto) slim z - distance top/bottom - 0mm Tree support branch distance -3mm
You can also print it without magnets - then you must activate support! Hardware: round 30x3mm magnets from Aliexpress or Amazon Settings: 0.20mm Standard +custom settings: Wall loops min. 3 Outer wall: 25 mm/s ( BambuLab 60 mm/s) Infill…
Use Multimaterial painting - Smart fill in Prusa Slicer. OR Color Painting tool in Bambu Studio 0.20mm Standard no support
Settings: 0,2mm layer height no support needed
designed: https://www.prusaprinters.org/de/prints/45398-decorative-lantern I changed the lantern to hang it up and made a motif with a deer. You can use the christmas motifs from the original lantern For assembling you need: 2x M3 nuts 2x…
Decorative Easter Bunny support only on prining plate paint with smart fill - smart fill angle 20° max. 0,2 layer height
Settings: 0.16mm Standard +custom settings: Wall loops: min. 3 Infill 30 % supports only for the lid needed
Suitable for sponges with these dimensions: b=55mm l =90mm h=25mm Printer: Prusa Mk3s+ Supports: YES Resolution: 0.2 Infill: 20% Gyroid Notes: printed in Renkforce Silver PLA
Use Multimaterial painting - Smart fill in Prusa Slicer. support needed
180mm height 90mm bottom diamter I haven't printed it myself yet. If someone prints it please put the parameters in the comments i will adapt it.
These are all currently available results.
