Counting matching models…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
UPDATE - Also fits Well Pro AK12 . Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some…
*UPDATE 31.12.25 → Now includes models for 12gauge Shells of the 3 major legnths. Be sure to choose the right variant for yourself. *UPDATE 02.03.26 → Added a blank front face for all variants. Now you can write on it as you please. A…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
***UPDATE!!! → Added a extra model for the SIG XM7. The normal Speedloader will fit as well. Its just so you have the right description on it. Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by…
***UPDATE*** Added a universal AR flag, try this for anything that isn't a VFC or WE. Seperated VFC and WE variants to prevent confusion. Added a VFC - BCM variant, to better fit its thicker upper receiver. Added multible name variants ,…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
***UPDATE*** Modified geometry to fit evenly into more models. Added even more name tags for different models. GO WILD! Use TPU for best performance. I added some frequent names to the flags, so you can choose which one you like. Empty…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
A set of Customizable Mock Suppressors for your KWA M11A1. I also threw a smaller “one piece suppressor” in. Combine them however you want. They fit a typical AceTech Tracer Unit. Supports are a little more difficult for this model. MS -…
Want to use your Airsoft APS-Shotgun on Outdoor fields, but your range is just too short? Have a lot of rest pieces of PLA-Rolls but you don't want to throw them away? Well, got I THE answer for you! High Performance Wads will increase…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
*Also fits Golden Eagle and Marushin M1887, only 6mm BB version . Unlock the potential of your S&T M1887 by using 3D printed shells that shoot more BBs and cycle better than the OEM shells. The shells are available in different sizes, 1…
UPDATE - With help of the commiunity, the Front Loader design could be improved to load easier. Thanks to "Delta Mike" of the Heavy Recoil Club! Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by…
A Carbine Kit for the KWA M11A1, to modernise it with an optics mount and better ergonomics. Available in righty / lefty. I recommend to print it in PLA or PETG. All models are orientated for optimal printing. Print Settings are attached.…
***Had to name it in this wierd way, because Glock is very protective of its name. I should've expected this beforehand, the biggest producer of ...."Horse milk".... will be a bit awkward when its about reading his own name. "Big Stick" -…
!!! Updated Design and Print Settings !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Dummy Shell Features: Hammer can be discharged safely. (Extended dryfire damages the hammer.) Helps…
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't know why, but this was one of the most requested adapters?! Print it for yourself or for friends. Use it, love it and leave a like. I used a “Pro Shop Speedloader” to design all of my Speedloader Adapters, it will work with…
***Update 09.06.26 Edited the model so it will also fir UMP 9 Magazines. Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't…
For the best results use a matte TPU. I used: “Sain Smart Matte Black TPU” Angle the print as show in the picture (45°). Apply Fuzzy Skin as shown in the picture. Do not print multiple levers at a time. Assembly of the RS type will take a…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
A recoil buffer for your Tokyo Marui - Saiga 12K. Its a upgrade to the spring TM puts into the Saiga. I recommend to print it in TPU (95A). Be sure to follow the Print Settings close, otherwise the buffer can wear out prematurely (still…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
UPDATE*** 12.08.2026 - Fixed wrong information - Corrected grammatical errors Okay my Boiz, that here is my Magnum Opus! As many of you know, I have a deep passion for Airsoft Shotguns and thus, our beloved APS-Shells. I really wanted to…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
A tool to help you seat paper-wads of your APS-Shells and compress BB-loads. Especially when you are loading many Hulls regulary. Your hands will thank you. Its a comfortable alternative to using the still legendary Load Tool from XE.
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
Turn your Airsoft 40mm into a actually usable Airsoft Shotgun by using APS CO2 Shells. Also carry ten times the ammo for the same weight. Just click it in and you are ready to go…… …..well you might need to modify and extend the valve…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
A handguard made to take a Novritsch Scopecam or ClipCam. It will fit any MP5/HK53 that uses real steel specs. Model is already oriented for optimal printing. I included a model with integrated supports just place it on your printer and…
Change your front rails with something more compfortable and achieve a high grip position. I have made these Thumbrests for right-handed and even for wrong-handed use ;P If you want, you can put some lettering on the Nametags. Compatiple…
***UPDATE*** Added varaint for AKS 74U Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU Chamber. (No broken…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Key Chain Tags for your keys or Chamber Indicators. Available in multiple variants. I recommend you print it in TPU (95a) or with your preferred FLEX filament and settings. Use isopropyl alcohol to help you, get it off the print bed. Be…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
***UPDATE 15.04.26 - Included Models with wider holes for the nail to make fitment easier. A small tool to help you to remove the bottom part of APS-Shells.
Unlock the potential of your Maruzen M1100 by using 3D printed shells out of TPU. The strong layed adhesion of TPU will prevent the shell rim being ripped off when cycling, while at the same time reducing wear of your "almost museum piece…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
!!! Updated Print Settings available !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Empty Chamber Flag (EC-Flag) Features: Hammer can be discharged safely. (Extended dryfire damages…
A little TPU plug to help you get a little bit more power out of your APS CAM870 (better with longer barrels). Easy to install. Use TPU (95A) Print with 100% infill.
An amplifier for your KWA M11A1.An amplifier for your KWA M11A1. Place supports like this:
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
*Will not work with the M1100! (It will rip the shells apart) Unlock the potential of your Maruzen M870 by using 3D printed shells, while at the same time reducing wear of your "almost museum piece of an airsoft". In testing I found it to…
A short grip for your APS CAM870 A short grip for your APS CAM870. There are 2 versions. Both are available with and without threaded inserts. “Integrated Loop” - Allowes you to use a simple fabric sling adapter. “APS Sling Loop” - Uses…
***Made to fit Golden Eagle, WA-Spec Magazines especially. This one was a bit challenging, first it goes easy, but it will need more force, the more BBs you load into it.. Don't you hate to load your GBB-Magazines with a wild three-piece…
A tracer carrier for your KWA M11A1.A tracer carrier for your KWA M11A1. Uses Standard AceTech Tracer Unit. Only place supports like this:
A tool to help you loosen the backplate of the all too heavily glued VFC Boltcarriers. Will fit HK53/PSG1 as well. This tool is meant to help you, get the backplate loose. Do not over tighten using this tool!!!!
A spacer to convert the AEG Handguard to fit your GBB it will also fit the shorter Handguard variants. It also includes barrel braces, just in case your G3 ever developes “barrel wobble”. Use M5 Grub screws for Part 2 & 3. Print…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
A simple follower design. Use it as a spare part, or to change the color of the follower to be more visible in use. The model is already oriented for optimal printing, resist your urge to turn it around.
*Only fits Marushin M1887, 8mm BB version . *Seals confirmed to work with 98 & 95a TPU Unlock the potential of your S&T M1887 by using 3D printed shells that shoot more BBs and cycle better than the OEM shells. The shells are available in…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
You're gonna have to get a 4mm thick PC plate to cut yourself the Protector.
***UPDATE*** Modified geometry to make it print easier. Added a variant for the up and comming HK33. Use TPU for best performance. Also fits HK33, HK53 and PSG-1. I included models for all variants plus HK51 & HK21. (In case you are brave…
A shell holder that can hold 5 shells with friction pads, that are included into the design of the model. Parts List: 1 Set - APS Scope Mount Pins 5x - M3 x 10mm - Countersunk Flat Head Bolt For the best mix of robustness and flexibility,…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
A tool to help you loosen the backplate of the all too heavily glued VFC MP5 Boltcarriers. Will also fit G3A3/PSG1/HK53. You will need two bolts: M3 x 25mm This tool is meant to help you, get the backplate loose. Do not over tighten using…
Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU Chamber. (No broken TV, when you demonstrate your airsoft…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
A simple front grip your Street Sweeper, with a rail section, so you can attach your accessory of choice. You will need a single M3 x 35mm socket head bolt. For the best mix of robustness and flexibility, I recommend you print it in PETG.…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
When converting a WE SCAR H into a MK20, you will find that there is a gap between lower body and stock plate. This little piece, slots into that gap. Also a longer buffer piece is needed to ensure proper function. Print the parts out of…
*Only fits top folding stock. A shell holder for your Maruzen M870/M1100. Attaches to your top folding stock and holds 6 shells. Includes a TPU piece to prevent the shells from sliding out of the shellholder. Additionally you will need…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
You love using 4.5mm BBs in your Airsoft APS Shotgun? But you dislike counting the very specific amount of BBs you have to use? Well, not anymore you don't! I have designed this Loading Tool to speed up that process. It will count the…
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU Chamber. (No broken TV, when you demonstrate your airsoft…
A sawn off style grip for the Maruzen M1100, for use with HPA. The models includes supports to make it easier to print. But you can also add you own supports. Models are oriented for optimal printing. You will need following bolts: 1x…
***Made to fit Inokatsu / Viper Tech Magazines. Its somewhat similar to the VFC/GHK Adapter, but I was still able to improve smoothness and the BB Kicker. Confirmed fitting: Inokatsu Viper Tech King Arms Western Arms Pro Win Don't you…
Convert every MP5 front sight to be able to mount to your G3A3. Especially made to use with crusader steel front sight. Print Settings: Model already oriented for printing. Use PETG or PLA. Layer height: 0.15mm Perimeters: 5 Infill: 100%…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
!!! Updated Print Settings available !!! Use TPU (95A) for best performance. I also added a “ready to go” Print File for Prusa MK3 users. Empty Chamber Flag (EC-Flag) Features: Chambers and barrel get misaligned → no shooting possible.…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
Model of the right action bar of the Maruzen M870. Just in case yours breaks. It is normally meant to be cnc'd or printed in metal, but as I had surprisingly good results, just printing it in PETG, I will share my print file as well. But…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
You got a lot of filament to store, but your shelf is in an inconvenient height? ......and then you have to get on your knees and climb into that shelf, just to reach the last box, that's gotten shoved back there somehow? ....AND THEN,…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
There is a high chance your VFC G3 will at some point, develop a condition called "Barrel Wobble". These spacers go between outer barrel and handguard and will inhibit any independent movement of your barrel. I made two versions, one for…
There is a high chance your VFC HK53 will at some point, develop a condition called "Barrel Wobble". These spacers go between outer barrel and handguard and will inhibit any independent movement of your barrel. I made multiple versions…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
These are all currently available results.
