Counting matching models…
Inspired by this commercial product: https://www.youtube.com/shorts/DahWUlaQY_0 Which is basically Chinese thing available on aliexpress (like all their products). No supports, PETG, 0.6 line width recommended.
Simple plastic bottle watering attachment for narrow spaces, like violets etc. Self pouring if you tilt bottle down. Requires 1 inch rubber gasket. (You can buy it or print from flex tpu) No support required. Original print - PLA 0.2mm…
scoop for very fine bentonite litter (0.6 – 2.25mm) Printed with PETG and glued down with cyanoacrylate 0.2 Layer height, 0.635 line width UPD v1.1 redesigned handle and added 2 m3 holes for rigidity (still will use glue) UPD v1.2…
Alternative casing to work with stock e2p tensioner pulley, knob and screws. The stock casing rubs belt at the end of the X axis when belts angle increases. This print gives full length free movement and requires nothing but plastic.…
Stiff Y axis travel compensation tensioner for custom printheads like Impact ( https://www.printables.com/model/296755-the-impact-printhead ), Compactor (…
Designed to use with №08 https://aliexpress.ru/item/1005005798266007.html?spm=a2g2w.orderdetail.0.0.50944aa6ZAql9j&sku_id=12000034389073273 holders - 4pc for each shelf. Can be printed on any 220*220+ printer. Original print on K1 - ABS,…
Box for cheap (but very good tho) trimmer from aliexpress https://aliexpress.ru/item/1005003302202654.html?spm=a2g2w.ord Trimmer can be charged inside of this box
Compact Ender 2 Pro printhead based on K3D Minifider (slightly reinforced) Nema 14 36mm pankake stepper motor Uses 5A BMG gear set and stock ender 2 pro radiator and optionally 4010 fan Volcano heatblock, thermistor and heater required…
Requires holes in the furniture for adjustment (with Hex key), you can drill it after screwing leg base. Has a slot for rubber\tpu insert to glue. Original ABS print settings: 0.6mm width, 3 perimeters, 0.2 layer height, 15 hex infill, 3…
Custom CNC Milled carriage. Designed by myself. No, you can't print it or mill it out of carbon. Only aluminum. Drops weight on Y axis by more than 330g (might vary a bit based on aluminum alloy), which allows to increase speed and…
Guarding touchscreen from toddlers that like to push buttons on screen :) Slides from top to bottom and vice versa. Use both hands to do it straight. Print verticaly. I've used 0.6w walls and 0.2 layer height.
ikea adde is great chair for outdoor use, but under weight tends to go underground ;) So I've made this. 30% infill, PETG\ABS.
Simple box with a lid for MR.GREEN MR-9901 Nail Clippers set You can get one from aliexpress - it's cool. I've seen it on amazon, but it's currently unavailable. Printed with PETG 0.2 layer height, 0.635 line width.
Remixed holder to use it on thicker handle mount.
After trying one of great models? I've downloaded here and damaging skin a bit after stepping on it, I've decided to make my own, rounder version + added bore for hard sand, because straight pole cant get through. Support the tip. Brim…
Another model of the hook for snap 4, that you can find on printables is great, buuuuut because it has no stopper or regulator bags are hanging too low (sometimes get dirty from wheels), so I've designed this. Requires 1 DIN912 M6x30…
These are all currently available results.
