Counting matching models…
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…
Several different holders for the IKEA Skadis pegboard. I use them for: scalpel pliers side cutter nut for nozzle change deburrer Category: Tool Holders & Boxes
A small trash bin for the purge line during 3d printing and other stuff. Print in vase mode I used a 0.4mm nozzle but an extrusion width of 0,6mm (I think, printed it a while back) and it came out really strong. Use double sided velcro to…
Print with Tree support and 4 perimeters.
A fork to put between plate and PCB of mechanial keyboards to hold the plate up while inserting switches. With soft and or half plates this can be tricky. This is a reverse engineered version of the plate fork from Fengstudio.…
I made a second version of my nozzle holder that uses pins/clips instead of hooks. You just push the holder into the board and it fits. Tried and tested (just didnt make pictures yet). Printed with PLA, with supports from the build plate.…
This is housing for the BigTreetTech 12864 Display. Might fit other versions of the 12864 as well, not tested. Two versions included: with and without the reset button. Be careful: once the printed button is put on the switch, it will…
A tube holder for our Zanussi fridge to save some space. Also check out the bowl/shell for small things like ginger: https://www.thingiverse.com/thing:3543276 Category: Kitchen & Dining
UPDATE: I made a new version of this that just plugs into the pegboard instead of using hooks: https://www.printables.com/model/135623-nozzle-holder-for-ikea-skadis-pegboard An easy Nozzle holder for the IKEA Skadis Pegboard. I added…
UPDATE2: Use this Remix instead, works better: https://www.printables.com/model/1084799-hoto-vacumm-secure-brush-holder When having the brush on, it is not fixed on the top, so it moves down and is very annoying. This solves that. Print…
To hole my Macbook on the Vesa mount. Cable is not long enough to put it far away under the desk or something. This way the desk is free. Print it standing on the side for strength. Use a big brim! And tree support on the lower edge.…
Use some double sided tape to put the ikea lamp on your curved monitor (R1500 but might work for others as well). I made this so I had space for my laptop there. See my other models. You need 2x 8mm diameter magnets (3mm thick) to hold it…
Hold the toothbrush upside down so the gunk flows down and leaves the toothbrush. The sink is easy to clean and will be cleaned anyway. Less extra work. This is the idea at least, not tested long term yet. Just use doublesided tape. Print…
UPDATE: Config updated below, works now as intended :) Only light switching during printing is still a bit unreliable. Not sure why yet. Update2: worked reliable for me now for years This “keyboard” with 5 keys gets conneted directly to…
Saw one of those in my local Hackerspace and had to made one myself. Had a look around but didnt like the ones I found, so I made my own. Uses these components: XY6509S Power supply module…
A spiralizer for your Thermomix TM5 and TM6. Designed for the blades of the MATIVI spiralizer: https://www.amazon.de/gp/product/B078XHNWBP/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1&tag=mobilemacs-21 Use only a small velocity (1-4)…
Just an easy toilet paper holder for the printing enclosure, so you always have paper to clean the print bed. Especially useful with a spray bottle filled with IPA for good bed adhesion. Category: 3D Printer Accessories
If you use a nut with a shaft for removing the nozzle, this grip helps protect you from the heat and use more torque. Preferably printed in something heat resistant like PETG, ASA, ABS etc. But PLA works as well, if you minimise the time…
Another version of an Extruder Visualizer. Idea came from a comment from Shadow84 https://www.thingiverse.com/thing:2759852#comment-1789648 (link does not work when clicking, thanks Thingiverse) - it is an Aperture Science version. One…
Here is the version for MX Switches https://www.printables.com/model/135614-plate-fork-cherry-mx
When you are designing a new part, sometimes it is hard to know which exact wall tickness you should choose. These parts give you a good idea how strong your particular material is in the different wall thicknesses. They can also double…
If you have dusty filament it can show up in the print. This removes it. Use 8 pcs of 4x2mm magnets, just push them in. No glue needed. Doublecheck the magnets have the correct orientation, especially when you do the second half. This is…
I added some self adhesive foam (EPDM) to the top to make it anti-slip. Works great. Includes Fusion file for editing. Hardware needed: M4 Square nut M4x10 screw
All designes I found only work with one kind of toothbrush, metal or plastic. But we have both. And the magnet in the cable is strong enough to hold the toothbrush upright. No need for additional structure around it that limits the holder…
I used the original model before but wanted to make some specific adjustments for all my tools. These are pretty standard to use in the keyboard hobby, so you might enjoy this modification as well. Designed for the Hoto precision…
One of ours broke so I made a printable version. Printed with PLA, will see how long it holds up against the UV rays. Steps and Fusion included.
Replacement for these old but cool forks. Print with TPU (98A in my case). Print with tree support.
Printed from PLA, not sure how long it will hold up yet.
These are all currently available results.
