Counting matching models…
Beer coaster for fans of Czech football team Sparta Praha - sorry, no english further. Podtácek AC Sparta Praha Model je optimalizován pro tisk na JEDNOBAREVNÉ Průša I3 MK2S, MK3S nebo MK4S za pomocí funkce ColorChange. Součástí jsou…
Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This box is designed for 16 pcs of CR2032 and 8 pcs of CR2025 batteries. Thanks for the nice design of the box.…
Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This box is designed for 8 pcs of 9V (6F22, 6LR61) batteries. Thanks for the nice design of the box. Print…
Another version of customizable lockable box with hinges. Most of customizable boxes are here done in OpenSCAD. For those who prefer direct building models in 3D instead of writing a source code, this is a version in done in Fusion360.…
Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This boxes are designed for 20 pieces of AA / AAA batteries. Thanks for the nice design of the box. Print Settings…
Needed couple of angle brackets to strengthen the shelfs in the wardrobe and did not want to spent a time by going to hobby market. There is also Fusion360 file attached, by changing the parameters, it is possible simply to customize the…
This is a remix of Combination Safe by ChuTec_Engineering_Solutions ( https://www.thingiverse.com/thing:1939676 ). I liked the idea of the combination lock. But the box itself looked too much as a toy, too much simple. So I created my own…
Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…
Another version of Servo Mount for Lego Train Switch. The others simple do not suit me well. All parts are printable, you will only need SG90 9g micro servo with a small screw (usually part of servo) and sure, the original lego switch…
Replacement sole pad for the Nordica B7 ski boots. Added also Fusion360 source file, if you would need to adapt a little bit… Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: Yes Resolution: 0.2 Infill: 40%…
Lid for 425ml can from Bonduelle, can not eat all the corn at once ;-) Just click on. Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.15mm Infill: 100%…
Remix of Simple mATX form PC chassis for the use with external AC/DC power adapter. This can accommodate bigger board.
Spare gear for Bosch Multi-Purpose Slicer MAS 4200. Print instructions Unassociated tags: MAS 4200 Category: Replacement Parts Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0.20 Infill: 30%…
Set of 3d printed parts for the remote motor control of the standard manual jalousie. Printed parts are attached to the jalousie control bar without any impact to the original control mechanism or window frame (except for a bit of glue,…
Window ventilation hole cover. Designed for original Vekra windows. Printed from PETG, but as it is designed for outdoor, ASA would be better.
Odznáček s českou vlajkou na zavírací špendlík. Délka 35mm. Pro tisk i bez MMU2. Potřeba zavírací špendlík cca 20mm dlouhý. Print instructions Tři stl soubory slouží k tisku tiskárnou s multimateriál upgradem. Pokud si budete generovat…
Created language set for Czech and English. You can print the sliders with engraved text with manual color change at least at 1.7mm. Or use combination of sliders and infill for multicolor print. Attached pre-prepared gcodes for single…
DIN rail box and sensor case for the pulse counter for energy meter. Box and sensor case printed from PETG, any standard profile will be good enough. DIN clips are glued to the case. Device is designed to count the LED pulses from the…
Mount can be placed on the microscope eyepiece. To hold better in place you can use two small screws. Dimensions are for Samsung Galaxy A71, but I am attaching Fusion360 project as well if you want to update for your mobile phone. To be…
Pieces for the board game The Voyages of Marco Polo. I tried to redraw based on the pictures only, not having the original one. Only the Camel is made by TorbenLB ( https://www.thingiverse.com/thing:2756171 ), too nice design to draw the…
Print from some durable material, I used PETG+CF. Layer height 0.15mm is fine. Use some small screws (M1.8x4). Broken headphones does not have much contact space for fixing, so together with screws use some glue. Apply some clamp before…
Shower head bracket spare part for the Novaservis JP/6139.0 shower arm. Printed in PETG. Print oriented by the round end up (standing on the “legs”). Supports not necessary, could be used for the hole in the middle. CZ: Náhradní držák pro…
Printed from PETG, 3 perimeters, 20% infill, 0.25mm layer height.
Silicon washer mold for the filter part of pool pump Pentair Water HYD - 071. Print with PLA, 0.2mm layer height for base, 0.1mm for details in the mold part (Height range modified in PrusaSlicer). Seems to hold for several months now :-)
Obsah: Ucpávka výčepu (při odstraněném kohoutu) Redukce_3/4" na PET (redukce na PET lahev)* Redukce_3/4" na 1/2" (redukce na sprchovou hadici)* Podstavec pro čistící sadu (jen nějak schovat ten ostrý plech) Spony na hadice (autor Jakub…
This part was created as a NFC door lock control system for Videx 4000 series. However part can be modifed to any other functionality, it fits the Videx 4000 frames. Instead of click based mount I am using a kind of latches. The original…
Needed to place attenuator between the Baofeng BF-H6 radio and antenna. Without proper housing it would be easy to break and look bad.
These are all currently available results.
