Counting matching models…
L298N Case with Zip-Tie closure and Screw holes for placement Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Generic PLA Wood Category: Electronics
Skadis add on using the universal hooks from : https://www.thingiverse.com/thing:2853261 holding Wera screwdriver set easy print Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
a keychain container for YubiKey 5c nano I found the loose cover suitable to PLA and the tight for PETG
An actually working Y splitter for Bambulab printers to be used to allow AMS and manual feeding without PTFE tubes switching NOTICE: Must follow instructions: This should be printed in 0.1 layer height !! Connect as follows: A - AMS | M -…
RC wheels for 1/8 Buggy (17mm hex) in a Lancia Delta Integrale Style Requires support on the build plate only Would not recommend PLA for this, printed well in PETG and ASA Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No…
Quick adapter for Makita Vacuum Cleaner to off the shelf Ali Express add on brushes and other accessories. Accessories external diameter 31.5mm Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2…
Same model - set up to 5 colors mmu print make sure your setup is up to the task - this calls for both accuracy of the printer and mmu for 100% print this is a 400 filament swaps print. Print Settings Printer Brand: Prusa Printer: Mk2.5s…
a Syringe leveraging a PTF tube to funnel fluids in or out Flex part needs to be printed in flex Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: genereic flex for flex part…
I really liked DomDomDom's Peanut - Snoopy model. However, I wanted to print in Flex and have the colors printed on the bed so it would result in a completely flat and smooth face. Hence the remodel it should be printed as is - with the…
I wanted to use my 8mm (3mm depth) magnets for this also remixed the bin to have 6cm overall width
this is a remodel of Anwilc Chair wheel mount. with a bit larger base and chamfer for the 5mm screws Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: generic PETG (can be any…
An actually working Y splitter for Bambulab printers to be used to allow AMS and manual feeding without PTFE tubes switching Print the Joiner and the adaptor. make sure to add support on the joiner only where it is needed (i.e. the…
NOTICE !!! - This is for the L298N Mini! not the regular driver. The case is closed by a zip tie and includes mounting holes the mini does not have the heatsinks, the screw connector or the enable input. however it is smaller (and…
Really liked @drwatson6 design, changed it a bit to better suit my needs. Higher tolerance for component placement on PCB (i.e. compensating for poor soldering in the manufacturing) countersunk holes for wood screws stronger pins for…
A remix for my own Ikea Lack mount this on mounts on the Prusa X-Axis with an M3 bolt into the X-Axis step motor it includes cable management hooks that keep the cable nice and tidy If you prefer the On-Axis view and have a Microsoft…
31/12/18 - added a cover with opening to the PI connector (version 1.8) A cover for a case bought from Amazon. the original cover did not have a nice support for a fan.…
Just added a keyring holder to the cover to make life easier Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2 Infill: 30 Filament: generic PLA black Category: Tool Holders & Boxes
This is a complete remodeling of the large combination lock by @EGauthierEAO. This version requires no bolts, but rather snaps together It scales nicely to 50% unlike the original Face plate uses sunk numerals for better print Requires no…
This is a nice puzzle solved by rotation I have smoothed the edges and made alignment cylinders just print : 2 Cross rotation (large parts) - align 4 holes upwards 4 small parts - align cylinders upwards 4 rods - align vertically (better…
Kitchen plinth Clip, used to secure lower panels of kitchen to the kitchen legs
This is a case for 2 L298N boards, if you need two and don't want to use two separate cases :-) Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 15-20% Notes: should print fine with any…
Zoggs goggles clip replacement
it is a "Yamaha Niken Front Wheel Adaptor for Wheel Balancing Machine" what more can I say? axle of up to 15mm
This is a replacement for the corner guards for Ketller Outdoor 10 table tennis . I have used ASA for UV resiliency but I assume ABS and PETG will do fine. only use PLA if the table is indoor and not exposed to the sun. this is a direct…
a camera mount for Yamaha Niken using SYS VSYS P6 P6F WiFi Motorcycle Camera Camera link : https://www.aliexpress.com/item/32832715516.html?spm=a2g0s.9042311.0.0.63f44c4d5sFKU5 The mount does not require any holes or screw into the body…
some modification on the original design by slayer1551: https://www.thingiverse.com/thing:2308978 I liked the original design idea, but wanted it to be a bit different, namely: turn the dial to face the front (!!) center the hanging beam…
This is replacement for Kettler rubber bumpers for the Outdoor table tennis table. it is functionally more robust than the original I recommend gluing the parts in place to avoid losing - as happened to the original parts :-( need to use…
This is in order to accommodate the Prusa MMU 2.0 in the future. the Top corners replace the originals, the extenders are on top of the original bottom corners Category: 3D Printer Parts
These are all currently available results.
