Counting matching models…
This is a single piece, half sized version of the cathedral model. I thickened some walls to make sure all features can be sliced properly at this small size. This model also functions as The Hardest Stringing Test Ever. Print Settings…
This chuck is based on an old patent drawing for a Jacobs chuck. The chuck can hold bits up to 1/4 inch. When assembling the chuck, the jaws must be inserted in the correct order. The parts have dot symbols on them to help you assemble…
When I tried printing the original ball and socket links, the socket pieces would snap off when assembled. So I made this stronger version which prints on its side. The friction fit is nice and tight. I did have one piece split lengthwise…
A Lagiacrus game rip model I found on pinshape. Cleaned up, rigged and posed by me. The "hires" model is a subdivided version of the regular one. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: Doesn't Matter Supports: Yes…
My changes to the original model: More space between the nozzles and the hot end to avoid melting Walls around the fan output to prevent air leakage Nozzle geometry redone to remove thin walls Added internal geometry to improve bridging…
This version of the push drill attaches to my 3 jaw drill chuck, here: https://www.thingiverse.com/thing:2625085 Also, I made a different end cap that should snap into place and not fall out. Category: Hand Tools
Case that holds six 3DS or DS cartridges. Print-in-place hinge. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: Printed in PETG Category: Video Games
This is a single piece version of dougc314's helping hands design. It has 1/2 inch tapered pipe threads, so you don't have to glue it to the pipe. Assembly is similar to the original design except with 1/2 inch pipe. This is compatible…
This is a gun foregrip attachment for the Valve Index controllers. It is designed to be as unobtrusive as possible, and doesn't interfere with the grip sensor. It works with all guns in Pavlov (except the pump shotgun). Update: Added a…
It's a keyboard foot Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 90% Filament: Filaments.ca PETG Category: Computer
Adds a detent to the X-55 left throttle. The device can be installed and removed easily. Note that this will add friction to the throttle. There are two detent pieces, one with 75% throttle (for afterburner), and one with 50% throttle…
Improvements to the Deviljho model: Manifold mesh Subdivided to avoid visible polygons Bottom of feet made flat Legs rotated for better balance (it can be coaxed into standing up) Print Settings Printer Brand: Prusa Printer: Prusa Mk2…
New version of my Vive gun stock with attachment by a cup instead of a clip. Adjustable height range of 3 3/4 inch (95 mm) Adjustable length of pull from 12 inch to 15 inch (305mm to 381mm) 100% printed construction, no fasteners or glue…
This version of the tool requires no additional hardware, and sits on top of the frame of a Prusa i3. Update: Completely redesigned the moving part and screw. The part is now smaller and the screws are thicker. The screws are now…
Update This Thing is obsolete, see my improved design here: https://www.thingiverse.com/thing:2905300 This gun controller for the HTC Vive has the following features: Proportions based on the M16, designed for H3VR. Height adjustable…
This is a small gun controller attachment for use in fast-paced shooters where you may not want the bulk of a full-sized stock attachment. You can switch between rifles, pistols and grenades easily. Designed for Pavlov, you can grab the…
This is a lens protector for the HTC Vive, designed to prevent glasses from touching the lenses while still allowing enough room to wear the vive with the closest lens to eye setting. Note that this is designed for my particular glasses…
A protective jacket for HTC Vive controllers. If you've heard of the Mamut on kickstarter, this is basically the same thing. Designed for flexible filament such as TPU. Warning: This is a difficult print Print Settings Printer Brand:…
I designed this lamp to run off my 3D printer's power supply. It has pan, tilt and height adjustments. The lamp uses 12 volt power, or with different parts it can be 24 volt. Nominal power consumption is 3.6 watts. The power can be…
This is an "iron" sight that helps you line up your binoculars to the target. It adds no bulk to the binoculars and still allows them to fold up. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution:…
This pin hooks into the upper lanyard hole of the Vive controller, reducing the chance that the controller will come loose during use (but you should still wear the wrist strap). Update: Added pin with larger finger ring. Print Settings…
Required Hardware 55 cm length of 1 inch nylon webbing Rubber band Print Settings 0.2mm layers 2 perimeters (with 0.4mm nozzle) 10% infill No supports (includes built in supports) The built in supports are 0.4mm wide fins in the belt…
These are all currently available results.
