Counting matching models…
I designed this din rail to be able to mount different sized plates to them using M3 hardware. printed with 100% infill The din this was made for is 35MM / 1.378" Category: Electronics
Gridfinity BIN Master / Blank / F3D file
I made this F3D file very easy to mod for the press fit of the magnets. If you go into the sketches folder and open the ( Magnet Holes ) sketch you can adjust the hole size to best fit the press fit for your press fit needs.
I tweaked the design for a current test platform i needed with a relay and potentiometer for a new project. The LCD mount in this mod is in the link below. According to Simplify3D the scale is ( 2540.00 ) in ( X, Y & Z ) axis. The program…
Tool tag for BT30 tool holders for easy identification. Print Settings Printer: Prusa Resolution: 0.250 Infill: 25% Category: Tools
I tweaked the original design for a current test platform i needed for a couple projects. The LCD mount in this mod is in the link below. The original LCD mount would not work since i am using the newer LCD that requires less hook up…
This is a Parametric box for use in any tool box and can be modified for any use.
BT30 tool tag holder. Print Settings Printer: Prusa Supports: Doesn't Matter Resolution: 0.250 Infill: 25% Notes: Use 1/8" x 1/2" magnets for the back of the holder Category: Tools
This mount is designed to cool the nema 23 steeper motors. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .300 Infill: 100% Category: Electronics
I could not find a zip tie mount to hold wiring down that met my needs so i decided to make this. The mount hole is for a 1/4-20 button head screw. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't…
Bearing holder for MK2s Category: 3D Printer Parts
Wanted to share a hood designed for the replicator 2 & 2X printers. I made this hood with a door so you can get to the inside without having to remove the hood. I will be offering the hoods for sale on www.MakerbotMan.com along with some…
I made this clamp set to hold the capacitor for my CNC Gecko G-540 setup. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .300 Infill: 100% Custom Section…
I designed this for my CNC router enclosure i made out of 80/20 to run the suction hose threw the top of the enclosure. printed at 50% infill and uses 1/4-20 hardware. Category: Machine Tools
Panavise helping hand using lock-line parts Instructions will add full build list soon Category: Electronics
Solder Holder made out of 0.208" thick Acrylic. Category: Electronics
6040 CNC router axis knob Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: No Supports: No Resolution: .300 Infill: 100% Notes: Best way to print is upside down with the bolt hole up. Category: Machine Tools
I designed this spool holder to be a bolt together design to make it very rigid for years of use without chance of breaking. Works with small hole spools like Sainsmart.com spools. Simpliify3D settings Top Layers: 3 Bottom Layers: 3…
I made this since there was not an upgrade for the older machines. I was trying to figure out why a used machine was having heat up delays and found out it was only holding on by one strand of copper. Print Settings Printer Brand: Prusa…
Will update once completed Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: No Supports: No Resolution: .300 Infill: 100% Notes: Will update once completed Category: Hobby
I was at my local ATX Hacker Space when i met a gentlemen looking for help with his project. The project he needed help with was a phone holder he needed to get done for his friend that is a quadraplegic from a football injury he got when…
Simplify3D settings Infill %: 25 Layer Height: 0.3000 Top Layer: 3 Bottom layer: 3 Outline shell: 2 Category: Electronics
These leveling knobs help keep your bed level while making fine adjustments to your bed height. Each knob has a 3mm nylon lock nut to keep the movement of the build plate fixed. I came up with this idea after getting sick of having to…
If you've spent much time leveling your printer's build plate as I do this tool will save you a bunch of time. This is the most important part of a successful build you know how aggravating it can be. This Jig is designed to work with all…
Best way to print this is on its back. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: No Supports: Yes Resolution: .300 Infill: 100% Notes: I needed this part for my MakerBot since the one i had got lost.…
HBP clips for PEI spring steel sheet. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.200 Infill: 75% Filament: E-Sun PETG Black Notes: You will need to have some 3M double sided high temp heat…
I will be adding a list of build parts soon. This spool holder will work with ALL filament rolls on the market. If anyone is interested in Buying one made out of Acrylic send me a PM. Category: 3D Printer Accessories
I will add more soon. Category: 3D Printer Accessories
I modeled this to hold the rubber feet in so there is no chance of falling off. I printed out a similar foot and just did not like how week it was and broke it the first time i used it. I purchased the feet from the Amazon link below.…
I designed this spool holder to use a 1/4-20 nyloc nut with a 2.500" long bolt. The system is attached to the rear of the machine using a plate with M3 nyloc nuts pressed into the main spool holder and is held on with 14mm long screws.…
I took the original STL file and imported it into SolidWorks to remove the support grid in the recess for the stepper motor for easy clean up and use of the part. The original file can be found in the link below.…
These are all currently available results.
