Counting matching models…
Very simple, its a credit card sized piece of plastic, with a cutout for a Yubikey 5C NFC. I printed my example out of Orange Microcenter ASA with a .1mm layer height, 6 permieters, and 20% infill, on my Creality K1.
This is one of my first designs, and my first with threads. Holds one tube of chapstick perfectly. Print in PLA at .12mm resolution with 100% infill, and supports only touching buildplate, at 30 degrees.
Overview This is a Magsafe charger for a MK6 VW GTI. Created using a scan of the car shifter area taken with an iPhone app (scan in files section). The charger mounts using only friction, so no holes and no glue to damage the car's…
Printed at .2 layer height and 15% infill. No supports should be needed, if you have issues with the overhang, just reduce bridging speed significantly v6 Updated for extra wide (ex. Xeon E5-2697 v3) and all other LGA2011 CPUs
Printing Settings Height: .1 mm (I used a .2mm first layer height) Walls: 4 or more Top/Bottom/infill: all layers should be solid layers Support: on Material: Glow in the dark ABS shown in pictures, but anything will do so long as it…
Inspiration drawn from this design, but smaller, larger triangles, more aggressive curves, and M4 nut holes.
So, the spout lid of my LTT 40 Oz water bottle broke. This design attaches securely to both the cap itself, and the body of the bottle. You then use paracord to attach the two pieces together, and the cap is now secured to the bottle. You…
This is a replacement foot for an IBM Model M. Modeled after the feet that came on my 1994 Model M. Print in TPU with solid infill and no supports.
This model holds a USB C breakout board in the port opening of an IBM model M, over top of a M Star Classic USB Conversion board, inside an IBM Model M keyboard. I used the included USB A connector, with a short cable to connect the USB C…
These are all currently available results.
