Counting matching models…
I have wanted to print a cat wheel for a long time, but I always run into the same problem: cost! All the wheel designs out there seem to come with some sort of large expense, whether it be the cost of the files, using tons of hardware,…
no modifications to drawer required, everything is purely friction fit! and its solid! allows you to divide up the drawers in your husky tool cabinet fusion files included (large printer required due to mechanical requirements of system)…
bracket to relocate filament sensor on kobra s1 to allow for use of y splitter Pairs great with my External Spool holder here's the Y Splitter I use Category: 3D Printer Accessories
spool holder for large spools, designed around 5kg spool measuring 30 cm in diameter additional parts required -roughly12"(30cm)of 1/2" EMT electrical conduit or other dowel/shaft with roughly A 18mm OD -4 M8X30-35mm or…
Remixed version of the wall mountable pc case by Dual Slot mATX case - Wall Mountable" by N3RDPWR pc components include proprietary power supply from acer mini tower, and front io panel from the same pc, feel free to rework to fit your…
simple clip for Ikea Trotten desk Category: Organization
simple fan adapter 40 --> 80 mm Category: Electronics
PI 5 case that fits single or dual NVMe M.2 base, as well as PoE Hat. Designed around the Pimoroni Base and wave share hat -can be attached to bottom using m2.5 nuts or socket head screws -use 10mm X m2.5 standoffs between the NVMe…
Replacement foot for the Logitech MK320 wireless Keyboard print flat side down with 100% infill (supports required) Category: Electronics
low poly moose head remixed from https://www.printables.com/model/436165-low-poly-moose Category: Sculptures
A simple Riser for lifting up your ACE PRO. very useful for Dual ACE PRO setups as it lifts up the ace just high enough to be able to open the lid when its placed behind another ACE PRO printable on the Kobra 3 itself can gets assembled…
Hex key holder for generic T-handle 10 Piece Hex key sets sold by many different brands. has spots for metric, sae, and torx. i have included Fusion 360 files for customization Category: Hand Tools
Spiral Planter for succulents and small plants Category: Sculptures
Adjustable screen Bracket for Anycubic Kobra Max. requires M5 bolt and nut or SAE equivalent Fusion 360 files included Category: 3D Printer Parts
this is version 2.1 of my wall gears project it is a kinetic sculpture project consisting of several sizes of gear wheels I created a custom backplate for the gear box to turn the dual motor gear box into a single motor unit I recommend…
Just a Fun little Fidget Toy Project Customize and remix as you wish! Category: Mechanical Toys
simple case For 4 ch relay board from amazon MHCOZY brand i have included fusion360 and step files for the housing and the board to use if you would like to modify mine or make your own! Please note you may need to snap off the extra…
Simple 2.5" SSD/HDD mount intended to be mounted using 3M VHB tape or similar Category: Electronics
I am Too lazy to put my coat on a hanger every time i come home so I made these hooks to snap onto my closet pole to hang my coats Category: Organization
Quick disconnect coupling for connecting a flexible 4 inch duct to a 12omm fan Category: 3D Printer Accessories
Jumbo Christmas Light Based off the classic C9 incandescent Christmas light, this larger than life Christmas light is sure to wow your neighbors! the bases have holes on either side to allow for you to add some jumbo wire to complete the…
40mm Fan Top case for "Raspberry Pi 3B+ Case" by mkellsy https://www.thingiverse.com/thing:3361218/files Category: 3D Printer Accessories
My Simple and Easy to Print Take on a Wall mounted socket And wrench holders prints with minimal supports (print laying on pack with support under socket pegs) mounts to wall with standard drywall or deck screws 3 drive sizes (1/4", 3/8",…
display case for the Mighty Morphin Power Rangers - Morpher by surfinbird132 https://cults3d.com/en/3d-model/game/mighty-morphin-power-rangers-morpher made to hold the morpher along with a extra coin This is a remix of: Frog Box v2.0…
simple usb e-brake I made using an old USB keyboard you will need some sort of switch. I used a micro switch from an old microwave but you can basically use any type of momentary switch. you will also need an old keyboard. use a…
power switch box to control DC devices uses standard dc adapter and switch wieldy available on amazon etc. 3 versions of cover depending on your printers tolerance Category: Electronics
Selectagon is a fully modular storage system consisting of full and subdivide hexagon drawers they modules are intended to be glued together for a seamless look Category: Organization
Simple Resizable Lithophane stand. adjust length by scaling it only on the Axis that corresponds to its length this works best if you have a 3mm thick frame around your Litho. to do this easily just put a black border around the image…
VERSION 2 AVAILABLE ! check my page This is my wall original wall gears project, -I have included 2 sizes of stands(hubs) of the gears one will make the gear almost flush with the wall the other will make it stand about 10mm away from the…
100% that that bitch keychain, has rim for resin pour Category: Keychains
3D letter shaped boxes Category: Containers
stackable hide for small animals, easy to take apart for cleaning made to fit on smaller printers (200X200) windows get printed separately and glued in Category: Pets
helical/herring bone gear pattern Vase, can be printed as is (1mm wall thickness) or can be printed in Vase/Spiralized mode Category: Decor
Replacement liner/plate for wireless charger in the 2019 chevy impala that allows charging of larger devices. the stock plate appears to be made only to accommodate a iPhone 4 for some god forsaken reason. (a phone that went out of…
This part was a commissioned by a family friend. I made it based of the original part but I have never actually tried it in the vehicle myself to see if it fits. you will likely need to heat up the mounting point tabs with a heat gun and…
made this impossible cube thing as I wanted to see what i could create in just Bambu studio without using any external cad software. it was actually surprising easy and this only took a few min to create! Category: Tools
Shallow Surface Mount Single Gang Box (North American) IMPORTANT NOTICE PLEASE READ!: This box is intended for LOW VOLTAGE applications only, it has not been tested or approved for high voltage AC applications, use at your own risk! In…
created as part of my Wall Gears V2.1 project. allows you to convert a dual motor by velleman or Tamiya gearbox into 2 singles, mounting holes setup for flat mounting Category: Hobby
Bracket to Strengthen IKEA MICKIE desks and reduce wobble 5 different styles included can be attached with screws, rivets, or bolts (drilling required) Category: Household
Heart shaped hinged box prints in 2 parts, Filament is used for hinge pins Category: Decor
sound bar design I did up to make use out of an old pair of pc speakers that no longer worked I added a picture of the set of speakers i used but you could substitute your own speakers and amplifier board from amazon. there is even plenty…
This is a cool chain based storage system that I came up with for gel pens. it looks good on your desk and allows you to easily scroll through your colors. it features a planetary gearbox and chain drive system. Assembly instructions Step…
did you drill you're cable hole too close to the wall? regular cable grommets don't fit! ! well i have the solution for you! a flat backed cable grommet! I had an issue with holes drilled too close to the wall when building a work bench…
replacement grip for snow shovel with 30mm / ~1" diameter handle shaft made extra wide for easy usage with thick gloves best printed upright with tree supports and at least 6 walls and 25% infill for strength . Category: Outdoor & Garden
3d printable enclosure frame for resin printer can also be customized by changing pole length by scaling in slicer or editing files directly loose and tight variants of all connectors included long poles and be printed whole on a larger…
I collect Quite a few of these Pill Bottles that come with Crazy Glue so I decided to turn them into free standing parts storage system it fits 30mm / 65mm bottles but you scale it in your slicer to fit whatever size you need Category:…
I created the model after arriving home one day and finding that the deadbolt had been partially/unsuccessfully picked, needless to say something had to be done. this device prevents the deadbolt from being unlocked while in use by…
case for LM2596 Category: Electronics
simple carry case for kardia single lead print upright without supports, raft reccomended Category: Other
Kawasaki Vulcan Classic Motorcycle Light Box Print with Default Settings, no supports has hole for hanging Category: Decor
-simple cat toy, -great for using up all your spools with only a little left. -prints in 2 halves -each ball half only requires around 6g ! -prints in 2 halves and is glued together with super glue. -40mm diameter(ping pong ball size)…
my Girlfriend's first solo design! holds 510 carts and batteries shooting star design inspired by lucky charms cereal can be printed separately or all in one Category: Organization
Replacement wheel for vintage tin toy car not sure of make of car but its from Japan and may be a Electro Mobile brand from around the 1950's hopefully someone can use this I printed the tire in tpu and the hub in pla, and glued with ca…
housing to turn a meanwell LRS 350 slim power supply into bench power supply Power supply: https://www.digikey.ca/en/products/detail/mean-well-usa-inc/LRS-350-12/7705030?s=N4IgTCBcDaIDYCcDOBaAzAVgAwoIwQF0BfIA Power cable:…
Double Helix Stand for phone tablet or display of collectables/products looks very cool in person and makes for a really neat time-lapse recording while printing very well balanced does not tip easily Category: Household
Filament shelf labels made to fit shoe racks or can be flat mounted step and fusion files also included see below for preparation instructions How to colorize with Bambu studio, Orca Slicer, or Anycubic Slicer Next Video Link STEP 1…
simple hot end plate to replace stock caution label. should fit many different models, can be scaled to fit other hot ends attached with VHB tape Category: 3D Printer Accessories
upgrades for my 5KG spool holder spool holder frame: https://www.printables.com/model/443077-large-spool-holder-designed-for-30cm-diameter-5kg- -Bushings to allow the use of 7/16 threaded rod for the shaft (6201-2RS bearings fit perfect…
cap to turn your pool chemical floater into a can holder! surprisingly stable even with a full can, best printed upright with custom tree supports under rim, ribs, and locking tab (see screenshot) make for solstice/hydroworks floater from…
Mounting arm to fit Dahua Turret, dome, or eyeball type cameras as well as other brands on any cubic kobra max Category: 3D Printer Accessories
wall mount for ducting that i made for my diy printer enclosure project Category: Household
The source marked this model as adult content.
DIY desk Fan base using pc fan with option for speed controller Category: Other
spool adapter for winding filament onto Jayo Plastic spools with ~72mm ID. It's slightly undersized with the intention add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printing
A simple Snap On truss that will work for the Anycubic Mega Series. Is very strong and I made it so the even the biggest size can fit on the regular I3 Mega at an angle i have also included my camera mount that can be adapted for…
This is a Split globe For my Jumbo Christmas Light This is for printers in the 250mm size range and fits the larger base. Also included a alignment tool to help with gluing. I recommend using CA/Crazy glue Category: Decor
yet another wow stick case design. just a basic easily pocketable design that uses the magnets from the original case or ant standard 3mm magnet. optional strap Category: Tool Holders & Boxes
LED puck light base for my Jumbo Christmas Light Works with the Bambu Lab LED Lamp Kit-001 or a Generic Version as long as it’s 60 mm Category: Decor
basic cup/vase with chevron pattern, must be printed in vase mode or it will print solid Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Filament: ERYONE PLA Notes: MUST PRINT IN VASE…
just a simple wire spool print in 3 parts and glue together with CA glue (Crazy Glue) made to hold about 20ft of 18 AWG wire but you can scale the model to suite your needs Category: Electronics
snow flake gears wreath thicker ring requires bigger printer, thinner ring will fit 250mm printers Category: Decor
Wall Mount Bracket for my Jumbo Christmas Light . Attaches using 4-6 #8-10 self tapping wood screws I recommend printing with high shell count and higher infill density I also recommend strong material such as pc, petg, asa, or ABS
The source marked this model as adult content.
spool adapter for winding filament onto Geetech plastic Spools with ~74mm ID. It's slightly undersized with the intention to add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printer Accessories
spool adapter for winding filament onto giant arm plastic Spools with ~74mm ID. It's slightly undersized with the intention to add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printer Accessories
This is a simple clip design that i made up to help with gluing LEDs into Light boxes but i have since found many uses for it, there's 2 sizes available a thin and a thick version, use the scale setting in your slicer software to adjust…
Made this replacement cap for my Floating pool chemical dispenser after a hail storm destroyed the original. I printed mine face down with some tree supports on the overhangs for the locking tabs Dispenser is solstice/slimline/hydro tools…
spool adapter for winding filament onto Anycubic New Cardboard Spools with ~53mm ID. It's slightly undersized with the intention add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printing
spool adapter for winding filament onto Eryone Cardboard Spools with ~56mm ID. It's slightly undersized with the intention add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printing
PROCEED AT YOUR OWN RISK.! HIGH VOLTAGE WIRING REQUIRED! do not attempt if you are not familiar with AC electrical wiring. power switch box that works with my heat gun mounting kit https://www.thingiverse.com/thing:4614168 allows you to…
spool adapter for winding filament onto Kexcelled plastic Spools with ~54.5mm ID. It's slightly undersized with the intention to add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printer Accessories
a tool for installing c clips on PC fans, sized for large server fans but can be scaled in slicer for different sizes Category: Hand Tools
dual level external holder, great if you have an dual extruder printer such as the H2 series or if like me you have many printers running side my side and need to maximize space this print does require a larger printer to print it one…
I picked up some led retrofit pot lights from an amazon returns store for super cheap but I don't have any existing pot lights to use them with so I made these pods to be able to mount them, also made a tilt bracket for sloped ceilings.…
AMS Lite Spool Adapter for Old style Anycubic plastic spools with a approx. 73mm ID Category: 3D Printer Accessories
These are all currently available results.
