Counting matching models…
3D model of a female Maryland blue crab The 3D model was created from CT scan data (11M triangle OBJ file) at the Smithsonian Institution - Digitization | 3D https://3d.si.edu/ To simplify printing, the .obj file was simplified in MeshLab…
Standard pipe flange. Designed for a spool holder support. Fits 1" electrical conduit (actual diameter ~30 mm). Print Settings Printer: Prusa Wilson Rafts: No Supports: No Resolution: 0.2 mm Infill: 35% How I Designed This Designed in…
VESA mount adapter for portable LCD displays - convert 75mm to 50mm mount - M4 screw pattern. I'm using to mount a Waveshare display to an arm (see https://www.thingiverse.com/thing:2799628 ) It just works! Print Settings Printer: Delta…
Touchscreen assembly for DFRobot 5" 800x480 TFT DSI touchscreen + Raspberry Pi and interior space for Pi HAT. Requires: 4 M2.5x20mm screws for the back of the case 4 11mm standoffs between Pi and HAT (can be printed) + 4 M2.5x20 screws 4…
Having a scale built into your spool holder is a cool idea. I came across a couple of posts about implementing a load cell and HX711 amplifier to measure spool weights as well as this article - with an Octoprint plugin :…
I did not design this. It seems that the original site hosting many fine creatures has gone away. This particular snail is quite nice to print and paint - especially for the multitude of spikes Print Settings Printer: Prusa Wilson Rafts:…
Servo mounting assembly for line laser. The servo mount is designed to accommodate 25T micro servo. Plate is 25mm round with 12 mm hole spacing. Screws onto servo with a button M3 screw. The laser mount will accommodate 12mm laser…
Articulating arm to mount an Adafruit TSL2591 luminosity sensor to a Piclop 3D Scanner ( http://www.thingiverse.com/thing:754003 ). Snaps together after some fine sanding at the ends. Requires a few M3 screws, nuts, and washers to hold…
Fancy LED array stand for 3258 SMD strip LEDs (1M 60LED/M). Strip fits within groove of holder behind light diffuser. Mounts to an 8 mm rod stand. Design requires printing 2X LED array (with a cut-away strip), a mounting plate, retention…
I own a 2011 Nissan Versa SL. I noticed one day that I was unable to open the glove compartment. The handle was broken. After a google search and a few telephone calls later, it seemed that the 50 cent part would cost over $100 and…
Flexible mount for split loom and wire wrapping for cable management. Mounts with 1x M3 screw. Diameter is 13.5 mm. Ideally part(s) should be printed in flexible filament and slowly to minimize stringing. Print Settings Printer: Custom…
LCD enclosure and mount for the Sainsmart 9" LCD. http://www.sainsmart.com/sainsmart-hdmi-vga-digital-9-9-inch-1024x600-lcd-driver-board-for-raspberry-pi.html Bezel mounts to the bottom with 8 M3-0.5 x 16 mm fasteners (either machine…
Display enclosure for the Manga Screen 2 (5.9" Large Version). Designed to be as slim as possible and provide cut-outs for 50 x 50 mm VESA mounting built into the back of the display controller mounting. Bezel and back should snap…
What’s better than Adafruit’s individually addressable smart RGB LEDs – an articulating mount to house them! This assembly is designed to hold the 12 LED RGB(W) NeoPixel Ring (e.g. Product ID:2853; https://www.adafruit.com/product/2853 ).…
These are straight-forward endstop holders for Sainsmart Hall endstop sensors. I figured is was time to take them off the shelf and design holders to adapt them to a 2040 aluminum extrusion format for a 1M Delta Printer (…
Took some time but I finally got around to an upgrade! So for some history - the 5mm threaded rod for the Prusa Wlison TS was so so frustrating so rather than rework it, I built another printer in 2018. And then my first printer sat on…
Cover for Raspberry Pi 3D Scanner (PiClop) that runs FreeLSS scanning software ( http://www.freelss.org/ ), a derivative of the Atlas 3D Scanner. You can order PCBs for the scanner from OSH Park - see…
A hardware mount for the beaglebone black/CRAMPS 3d printer interface. Two part solution including standoffs, strain relief, and active cooling mount for 20 mm fan. Mounting holes for M5 screws onto 2020 extrusions. Instructions Print top…
A cooling duct designed for a large Delta Printer (1M in height) with 455 mm 2020 horizontal extrusions (RobotDigg 2040 corners). The housing is for a Beaglebone Black and Replicape mounted to an 0.09" aluminum plate that functions as a…
These are all currently available results.
