Counting matching models…
The first model I came across was this weak design: https://thangs.com/designer/endolux/3d-model/Gridfinity%20Bambu%20X1C%20Nozzles.stl-306832 … which was fatally flawed as it was too shallow and lacked storage for related parts. Luka's…
A 1:12 scale model of this Masonite door: https://www.homedepot.com/p/Masonite-32-in-x-80-in-Premium-Right-Hand-Outswing-Flush-Primed-Steel-Prehung-Front-Exterior-Door-with-No-Brickmold-84192/204759988 I used 1.5mm x 8mm self-tapping…
These little beasties I made over 9 years ago and posted to Thingiverse, a practical design I designed to help build my entry to the 2015 Hackaday Challenge. With my printer at the time - IIRC, a Microcenter Makerbot (a FlashForge Creator…
3D terrain map of San Diego County from Cardiff to Tijuana, Mx. 3MF file expects green in color 1 and blue in color 4 (using Bambu Lab AMS). Ocean and inland water bodies filled in blue. I printed this at 0.08mm layers in all green prior…
I recently acquired some Makerbase MKS42B closed-loop stepper motor drivers after seeing them used on someone else's project. The stepper controller uses a Magntek 6816 magnetic angle sensor (BOM lists Allegro A1333 and AMS OSRAM AS5047D…
Hip & Ridge Roofing Shingles patterned after Owens Corning DecoRidge tiles in 1:12 scale (1 foot real world to 1 inch scale model). This is part of my 1:12 scale solar shed design, along with a model for Owens Corning architectural…
The pro knives cost a fortune for a simple plastic-handled, guarded-blade knife. $57 USD! Mine is a little fatter, could use a diet, it's a work in progress and I might refine it. It uses standard X-Acto #11 sized blades. If you have the…
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
You may have come across my other 1:12 scale models for my solar shed project - I'm building a real shed & a 1:12 scale model of it. The real shed will contain a 12kW and 8kW solar charger inverter and two 32-cell LFP battery arrays. One…
I broke the handle on my grabber (grabber of printouts off the printer from across the room behind the Bambu X1C) & didn't want to spend $12 on a new one. So I patterned a model after the broken bits of the handle. Dropper the broken…
Part of my solar shed scale model, this is a mockup of the Watts 24/7 PV Combiner Box used to combine 6 parallel PV inputs to 1 output. https://watts247.com/product/solar-panel-combiner-box-6-circuits-to-1/ The downside of the inverter…
Shingles scaled to 1/12 actual, arranged according to the installation instructions.
This remix is based on another design: https://www.printables.com/model/348768-ams-side-mount-spool-holder-for-bambu-printers/files Specifically, file AMS side spool v3.STL. Just one problem: I have this beautiful tool box from here:…
I made a scale model print of my solar shed design. The scale model serves a useful purpose in planning the layout of my inverters, panels, batteries, and bus wiring. Model can easily be painted in Bambu Studio for multicolor printing as…
I made a scale model print of my solar shed design. This model is scaled accurately from the actual battery dimensions, so you could scale this up to full size if you had some reason to physically mock-up a battery installation. The scale…
Found a case for the ODROID XU4, but the ODROID XU4 I had used a tall passive heatsink vs the low-profile one with fan. Adding a 7 or 10mm fan to the lid, needed about 15mm more height. Lid also did not have holes to mount fan to lid, so…
I made a scale model print of my solar shed design. This model is scaled accurately from the actual battery dimensions, so you could scale this up to full size if you had some reason to physically mock-up a battery installation. The scale…
Yuanley YS25-0402 is an inexpensive 4x 2.5G Base-T + 2x 10G SFP+ Ethernet Switch that tends to run hot when SFP+ 10G modules are used. This shroud directs air from a 40mm square x 10mm thick blower. I purchased a couple from Amazon to…
OK, I'm pretty proud of this one, being a big fan of AvE's YouTube channel, https://www.youtube.com/@arduinoversusevil2025 . This is his logo realized as a 3D model. I think it's skookum as frig. If you need help with the terminology,…
Somehow I dropped a couple of pieces from my kit and never managed to find them. Looked at the wooden frame they came from – sure enough, spots for 8 pieces, and I only had 6. Took a few caliper measurements and sketched this up in…
I got a bunch of 74Ah high-output Japanese surplus LiFePO4 cells (note the high output chemistry is rated for 2.0V to 3.5V range, not the typical 2.5V to 3.65V for other LiFePO4 cells). These small 74Ah cells can output 180 Amperes…
The name is a pun, BUTYTHO = BUT Y THO? I used Visio to design a shed for solar equipment and converted to a SolidWorks design as a learning exercise. Scaled 1:12 and based on North American dimensional lumber. I mean, why not make a 3D…
From the recommendation of @WillProwse YouTube channel DIY Solar Power with Will Prowse, I bought one of his top recommended cordless hydraulic crimpers. The only drawback so far is the the dies tend to get dumped inside the blow-molded…
UPDATE I don't like the minimum price of $5 enforced by Printables, as I feel it is a bit too much given the user must use their own materials and time to make one and the design is quite simple. Cults 3D allows lower pricing, so I have…
These are all currently available results.
