Counting matching models…
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
BTT manta m8p v2.0 low height dinrail mount print 4 rings, dinrailmount1 and dinrail mount2 4pcs of M3 screw (length 8-12mm) will be needed.
All retail c13 plugs have long tail. So I designed flat C13 plug. You need : LZ-F-10 1ea https://www.aliexpress.us/item/2251832825387921.html Female Insulated Spade Wire Connector 3/16'…
you need M3x10mm screws
raspberrypi5 + x1002(nvme adapter) + official pi5 cooler + NVME heatsink(from aliexpress) x1002 standoffs and flathead screws were not used, you need M2.5 SHCS longer than 10mm Raspi reset button can be pushed on the case. The case…
Required Parts: One M3 8mm screw (four if you're not using the fan mount) Three M3 screws, 10mm or longer (none if you're not using the fan mount) Three 3010 fans (no screws are needed to attach the fans; they'll fit snugly) Important…
Argon NEO 5 screws were not used. You need M2.5x8mm SHCS x2ea, M2.5x10mm SHCS x2ea
allow circular movement of PTFE tube. 1ea GE4C bearing and 4ea M3 BHSC 6-8mm needed GE4C(https://www.aliexpress.com/item/1005001865254355.html)
raspberrypi5 compact case with 2mm thickeness + x1001(nvme adapter) + ssd1306 case + official active cooler m2.5 flat nuts(x6) and 16.5mm standoffs(x3), which containing in x1001 Jan 28th, 2024 - SSD1306 was moved through other side, and…
Designed for Beelink SER7 You need 3pcs of M3 self tapping scew
using x1001 containing M2.5 flat head nuts.
orangepi 5 plus compact case for NVME heatspread thickness 2.2mm You needs M2.5x10mm SHCS x 4ea.
27GL850 has recessed VESA mount, so you need standoff with 5mm thickness you need 4 pieces of M4x12mm or longer
my homelab server by orangepi 5plus orangepi 5 plus case contaning zigbee coordinater, NVME heating spreads, SSD1306 additionally you need, M2.5x8mm SHCS x 4pcs my SSD1306 has abnormal size 24.7x27mm, you may need correction. my zigbee…
you need to tap the base aluminum enclosure I just found this on AliExpress: US $9.12 | Aluminum Enclosure 125*51*110/150/160/180mm Split Case Electronic Project PCB Instrument Black DIY Power Supply https://a.aliexpress.com/_okLE5EL…
FOR 4pcs of z motor brake holder you need 2pcs of M3 screws(10mm) and hammer nuts
you need 10 pcs of M2.5 screws. and, you need to rotate screen and touch Screen Rotation - KlipperScreen sudo nano /usr/share/X11/xorg.conf.d/90-monitor.conf Section "Monitor" Identifier "DSI-1" Option "Rotate" "left" Option…
plug converter with tight fittness use contained screw for tightening print 2pcs for 1plug https://smartstore.naver.com/mmtong/products/415884997
To prevent losing hex wrench
A jig for cutting a 2280 NVMe SSD to make it a 2230 NVMe SSD Especially for hynix BC711
These are all currently available results.
