Counting matching models…
I used a short small woodscrew to fix the hook on the hole. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15mm Infill: 15% Filament: Prusament PLA Galaxy Silver Category: Automotive
A simple apple-watch charging dock, to stick to the wall with double-sided tape. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15 Infill: 15% Filament: Purefil PLA Antracite Notes: The supports…
A bracket to mount the logitech z906 sound system control box under the table. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15 Infill: 15% Filament: Prusament PET-G Black Notes: I used…
Keeps my door from closing when there's a little wind. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: 15% Filament: Prusament PET-G Orange Notes: Ideally a little flexible Category:…
I lost the cover cap of my ice screw, here is a replacement. The ice-screw type is: Laser Speed Light from Petzl Note: I printed it in TPU for extra durability, but it also works with hard materials like PLA, PET-G, etc. The slope of the…
This Cable-guide should protect the cable of the x-Axis. The cable ties used are 1mm thick and 2.5mm wide (the ones which came with the 3d Printer). The Screw is M3x6 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
I have used a magnet with the following dimensions: height: 2mm diameter: 6 mm Because the indicator slipped, I glued a piece of rubber on the magnet. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
This holder can be mounted on the back of a cordless screwdriver. The bits are held by magnets which are located inside the 3d printed part, also the nut for the screw is located inside the part. To insert the nut and magnets, the print…
A case for the Giger-Counter Kit: Parts of the kit are documented here: https://github.com/SensorsIot/Geiger-Counter-RadiationD-v1.1-CAJOE- In my case, the kit came with M3 standoffs (5mm and 15mm) and an acrylic cover. However, the…
Spacer for Raaco Drawer. width bottom 63 mm width top 64 mm height 31 mm Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.15mm Infill: 15% Filament: Purefil ABS Orange Category: Organization
A simple clip to hold a cable somewhat loosely. Taped to the wall with double sided tape.
Charger Dimensions: 110 x 55 x 30 mm Tolerance around the charger: at least 0.5mm (perfect fit, very little wiggle room) Print Settings: Material: ASA Layer height: 0.07mm Bed temperature: 110°C Tool temperature: 260°C Part-cooling Fan:…
A Organizer to clip 8 StabiloBoss together. Note: the stabilos do not hold together very well Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: Prusament PET-G Orange…
I use multiple balance lead extensions in series as the charger and the battery are separated from each other. However the connectors of these balance lead extensions don't hold together very well and disconnect all the time! Here is the…
I wanted to have a Holder for my brass brush, so i designed one. Not the best, but does its job. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15mm Infill: 15% Filament: Prusament PET-G Orange…
These are all currently available results.
