Counting matching models…
Customizable Fan Grill Cover by mightynozzle (https://www.thingiverse.com/thing:2802474) I wasn't satisfied about the most of the fan covers available on thingiverse, because the finer details aren't optimized for 3D printing. That's why…
Dual output fan duct intended for the original KINGROON KP3S V5/MK8 hotend. I have redesigned the model changing the shape and output angle and seems to provide more output. Water test of my remix (100% speed original fan) Water test of…
Small trays to store screws during disassembly of small devices. Slot depth is 5mm Also check my round tray here 114mm x 71mm tray with 10 slots 115mm x 114mm tray with 11 slots 170mm x 170mm tray with 27 slots
Reinforced version of the two bases with extra braces to make the sides more stable. In addition to the stability the braces will also act as bridges while printing. There is also a 173mm version to fit printers with smaller print table
I love the closed version but it wasn't working very well for me mainly because the curve of the filament was causing a jam and the clip wasn't moving freely. I have removed a part of the closed section and this allows the filament to…
The design uses two 5015 fans with two fan ducts, one at the front and one on the left side. [THIS IS NOT NEEDED, THE FAN FITS ON THE LEFT SIDE FINE] To make space for the left side fan duct the 3010 heatbreak fan has to be rotated to the…
Creative Tools Creative Tools supplies 3D printer and 3D scanner products incl filaments, accessories and support and also 3D software for leading CAD, modeling, animation, and rendering. This small easy-to-print device can protect your…
I have created two adapter disks, can fit the Sunlu spools (72 mm ring) and the Creality black or transparent spool (55 mm ring) can fit the Sunlu spools (72 mm ring) and the Esun black spool (53 mm ring). It's possible to print only the…
A round shaped screw measuring tool in a diameter of 50mm with 6mm height to fit in a pocket with a capability to identify M2, M2.5, M3, M4, M5, M6 screws and measure screw lengths up to 48mm. I have used PLA, 0.2mm layer height, 10%…
T handle to use with a 5mm Allen key
Caliper depth measuring foot to fit an unbranded vernier caliper with body dimensions 16mm * 3.5mm having small plates on both sides I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too…
Caliper depth measuring foot to fit a Shahe digital caliper with body dimensions 16mm * 3.5mm I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too (although the fit of the caliper is already…
Remake of the dust filter without the text logo for faster print. The filter helps keep the extruder free from dust that can be on the spool. Cut a sponge (any kind you prefer) near the size of the filter Then use a pair of tweezers to…
A remix of the original model with extrusions in place of the cuts for the face features intended for two color print. It can work for either normal or glowing filament.
The wide funnel fits the pet water bottles and the small one fits the small acetone bottles. Check the provided dimensions. The models have 0.6mm walls and they can either be print normally or even better using the vase mode. Print it…
Marking gauge remixed to fit my 15mm x 0.8mm ruler. I have reduced the slot width and increased the hinge radius by 0.2mm because the original one was not locking the ruler. Use a small nail or a wire to hold the hinge in place I have…
My printer has a 180 mm table and I was not able to fit the front and rear base so I have remixed them in order to fit. All the model dimensions are the same as the original except from the lower frame that has been cropped and the holes…
This is a plunger intended for solder paste tubes like the one shown below that are normally sold without it. The plunger is printed in one part and you break the support structure of the moving part once it is printed using a small…
remix of the original model to fit the board I bought screw hole distances Print the top up side down, the bottom with the bottom side down and the battery cover on the side. You'll need to use supports and probably a brim for the battery…
The two replacement gears fit the model shown below, it was bought from ebay several years ago. Both fit a 2.5 mm shaft. I printed them using PETG To improve the fit use a 5-6mm drill and make a small groove at the bottom of the double…
My flashlight uses three AAA batteries and I wanted to replace them with a single 18500 lithium battery so I needed an adapter because the battery diameter was smaller than the flashlight tube. The cylinder I have made has 23mm external…
I was not able to print the original model in my printer because my table is 180mm x 180mm so I have remixed the model to fit in 180mm tables. I kept the basic parts, the tips and the screwdriver. I also added two hinges on one side and…
Round tray to hold screws or other small items , 90cm diameter in two versions, 5mm height and 7.5mm height
The left and right side can be printed with the base side down.. For the screw I have used a painted support near the middle to stabilize the screw while printing. Select tree support in prusa slicer, open the paint-on supports tool and…
These are all currently available results.
