Counting matching models…
I needed to make these for my friend for Christmas, but the ones here on thingiverse weren't very well made. I took took inspiration from Thain's billy clubs, and remade these from scratch using fusion360. Enjoy! Category: Props
My wife wanted me to make her a certain princess ornament, so i designed them all! lol. They should be all the main ones anyway. They should be printed laying flat, with no support needed. Enjoy and Happy Holidays! Category: Decor
Made some thumbsticks to replace my worn out xbox thumbsticks i had on my ps4 controller. I personally love the way these feel. They provide great grip, and feel light seeing as they are made of pla. I printed these with 100% infill with…
Recommend printing with supports, face up for best results. Category: 3D Printer Accessories
This is a modified klicky probe mount on the klicky probe github from user SSerpente. Lowered for the volcano hot end.
Wall mount I made for the Hawkmoon hand cannon from MyMinifactory. This is the link for the Hawkmoon I used. https://www.myminifactory.com/object/hawkmoon-from-destiny-full-scale-and-moving-6863 . It screws to the wall with holes in the…
Shark cable wrap for an iphone block and cord. May work for some aftermarket chargers, but it was designed for the oem one. I printed it face down and used supports. If you print one, please post pics so I can see how they turned out!…
Shorter neck for the hovalin that will fit on a 200x200 bed. I cut off around an inch and a half of the part that goes over the violin. I had to position it manually in cura, and it was kind of a pain, but its doable. The pic shows how I…
I needed a motor mount that raised the left side up so it would put less stress on the motor shaft, but the one i downloaded was kind of flimsy, and any tension on the belts would cause it to slightly bend upward. So i designed this one…
For the S-240-12 model psu. Printed at 100% infill and .3mm layer height. Recommend to print upright with 10% support. There are different power supplies that come with these printers so look at the pics and make sure you have the same…
Couldn't find an adapter for a Petsfang duct to install on my friends Tevo Tarantula, so I made one. Haven't installed yet, but it should work fine. You can download the other parts for it here, https://www.thingiverse.com/thing:2759439 .…
I modified the screen back file to incorporate magnets. I had them laying around but I believe they’re 8x3 neodymium and I did a pause at layer height to insert them. The main body of the case can be downloaded from the vzbot GitHub…
Blower fan cover I made for a friends printer. Category: 3D Printer Accessories
I needed an easy way to mount the e3d v6 clone I purchased for my p802e so I made this. I used this cooling fan adapter https://www.thingiverse.com/thing:506958 , however the blue one that comes with the e3d v6 might also work but is…
I modified the corner bracket of pheneeny's AM8 to be able to mount the extruder like it was mounted on my Tronxy p802e. After a year of loading filament into it, i didn't want to change my technique, lol. Enjoy! Category: 3D Printer…
Inlay on this one is very tight, but it will fit. I had to carefully push it in with a flat head screwdriver. Glue is also recommended before you press it in. Printed at .15mm layer height and 30% infill. Category: Toys & Games
I remade the stock blower fan nozzle for the p802 because mine was in rough shape and i wanted a color change. I used supports for the duct but you might not have to. Should be printed on its side so you wont need any external supports.…
Extended the mount to allow room for my cooling fan. Update: split the model to make it easier to print, then it can be glued together for use. Category: 3D Printer Parts
These are all currently available results.
