Counting matching models…
This is a 4 color remix of Gary the snail it should be obvious where he is from, but anyways the colors I would use for this model is: black, white, pink, and sky blue.
This print was done on a Bambu labs p1s using the following colors white, black, gold, red NOTE: this is not my model, the original maker of the model itself was made by printedobsession , I painted the colors for this model.
This print was done on a Bambu labs p1s using the following colors grey, gold(silk), orange, black Orange and black for the eyes, I wanted to use red instead of orange but the spool I had did not want to spin properly in the AMS and would…
This print was done on a Bambu labs p1s using the following colors white, sky blue, black, and red. Surprisingly durable for how small this model is.
this print was done on a Bambu labs p1s using the following colors white, beige, and black this model was surprisingly easy to print in numbers, 14 hours later and i have 11 figures i dont know what to do with. NOTE: this is not my model,…
This print was done on a Bambu labs p1s using the following colors white, beige, sky/light blue, and grey I would recommend using brown for the shell however my spool of brown pla filament was too wide and didn't fit in my AMS system so i…
disclaimer the model is not 100% similar to the images featured for the original on cults since I only have 4 colors to work with mainly the chest part not having the glow aura because I couldn't fit the yellow accent color and didn't…
This model was printed on a Bambu labs p1s with an AMS system using the following colors: red, black, white, and grey. this model is made as separate piece's so glue is somewhat required.
This print was done on a Bambu labs p1s using the following colors white, beige, green, and black. this print is very top heavy so its heavily reliant on supports and needs to be glued on a platform to stay upright unless your really good…
The following colors were used: red, blue, white, brown. Unfortunately due to the lack of skin colored filament I ended up using pale white filament. if you do have beige filament I recommend to use that instead of white filament.
This print can be printed with the following colors yellow, black, white, and brownish grey. Do not display this guy on a shelf that is shoulder height, the spiky feathers get caught on everything.
this model was printed in the following colors in the following order: red, black, brown for the meat hook: black, yellow for the handle: black, red, brown. sorry for the color mix-up posting this model was an afterthought and I'm too…
the following colors are used in this multicolor print: black, light-blue, red
This is a remix pack of the rip of all the powerups / items from super Mario bros wonder the following contains: mushroom 1-up mushroom drill-shroom elephant apple fire-flower bubble-flower wonder-flower fire/bubble/wonder-flower stem…
NOTE: The wings of the model are a bit thin and parts of it are not detected when being sliced. To counter this, reduce the line width of the outer wall down to 22mm. I'm not 100% sure this will fix this as I haven't printed this out yet…
this model can be printed with the following colors brown, light brown, white, and black. The simplistic model and low print height should make a quick and filament efficient multicolor print, well as fast as a multicolor print can go.
wanted to print a low poly paldean wooper but there wasn't any models of it online so I made one
This print requires the following colors: brown, light brown, silk yellow/gold, white and red silk.
The model is printed with the following colors: sky blue, blue, white, and grey. Its so unfortunate that a printer friendly version of articuno's galarian counter-part does not exist its yet. Its one of my personal favorites legendary…
This model was printed with the following color Grey, white, black, and orange in that order. The stand was printed with neon yellow and is separate to the actual figure.
the bottom part of the collapsible Katana has a tendency to break, this is supposed to fix that and spice up the look of your katana. I recommend to print at infill 40% and above and if you have not printed the katana, do it without the…
This model is printed with the following colors for the multicolor peice: black, silver(silk), and grey. The bottom shell is printed with light brown and the reinforcement ring isn't seen so you can print it with however color you like
I've noticed that people were having trouble aliening the dual extrusion models together this should fix this. I don't own a dual extrusion printer so I'm not 100% sure that this will work in terms of software/file compatibility, if not…
The colors I used for this print was: light blue, white, silver, and light brown. The top part of the model is multicolor while everything else is not. This model has been scaled by 150% because it was really tiny.
This model was printed with the following colors: lightblue, white, lightbrown, and brown The base is its own separate piece and uses neon yellow.
Ive made the pre evolution of this guy and had him sitting in my files, so I decided to publish him
the maxwell you see is printed with the following colors, black white and, mint green. watch him spin
the model you see is 35% larger than its download models I recommend using hot glue or whatever bonds to the filament you prefer to use. NOTE: this model is outdated go to here for my improved version:…
The following color were used: brown, sky blue, light brown, and white.
low poly Galarian corsola, I used white PLA for the body and clear PETG filament for the coral. the body requires supports in order to print properly.
the model you see is 50% larger than its download models I recommend using hot glue or whatever bonds to the filament you prefer to use and not your fingers.
The following colors were used in the multicolor model: brown, white, and pink. There is also a non multicolor version in stl format if anyone just wants the improved model as is.
its a display case (obviously) using velcro or magnets superglued to the case slots and on the plexiglass panel. the measuring parameters for the glass panel are in the images.
Inspiration:
a card deck for sleeved cards (not top-loaders) if you still want to use it for top-loaders increase the size of the model by 15% this includes all the parts multi-color isn't required but glue is
a card deck for sleeved cards (not top-loaders) if you still want to use it for top-loaders increase the size of the model by 15% this includes all the parts multi-color is required but only 2 colors glue is also required
These are all currently available results.
